From b2cdb3a102f882d33593546055e6cf2f29f06894 Mon Sep 17 00:00:00 2001 From: kcro227 <84958206+kcro227@users.noreply.github.com> Date: Sun, 19 Jan 2025 23:20:10 +0800 Subject: [PATCH] mediatek: add for cmcc xr30 support --- .../mediatek/dts/mt7981b-cmcc-xr30-nand.dts | 116 ++++++++++++++ .../linux/mediatek/dts/mt7981b-cmcc-xr30.dtsi | 148 ++++++++++++++++++ .../filogic/base-files/etc/board.d/02_network | 2 + target/linux/mediatek/image/filogic.mk | 18 +++ 4 files changed, 284 insertions(+) create mode 100644 target/linux/mediatek/dts/mt7981b-cmcc-xr30-nand.dts create mode 100644 target/linux/mediatek/dts/mt7981b-cmcc-xr30.dtsi diff --git a/target/linux/mediatek/dts/mt7981b-cmcc-xr30-nand.dts b/target/linux/mediatek/dts/mt7981b-cmcc-xr30-nand.dts new file mode 100644 index 000000000..82ba86a11 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cmcc-xr30-nand.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include "mt7981b-cmcc-xr30.dtsi" + +/ { + model = "CMCC XR30 NAND (U-Boot mod)"; + compatible = "cmcc,xr30-nand", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac1; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_2a>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&macaddr_factory_24>; + nvmem-cell-names = "mac-address"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x00000 0x0100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + factory: partition@180000 { + label = "factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_24: macaddr@24 { + reg = <0x24 0x6>; + }; + + macaddr_factory_2a: macaddr@2a { + reg = <0x2a 0x6>; + }; + }; + }; + + partition@380000 { + label = "fip"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7200000>; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + }; +}; + +&wifi { + mediatek,mtd-eeprom = <&factory 0x0>; +}; diff --git a/target/linux/mediatek/dts/mt7981b-cmcc-xr30.dtsi b/target/linux/mediatek/dts/mt7981b-cmcc-xr30.dtsi new file mode 100644 index 000000000..465040ccd --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-cmcc-xr30.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2023 Tianling Shen + */ + +/dts-v1/; +#include +#include + +#include "mt7981.dtsi" + +/ { + aliases { + led-boot = &red_led; + led-failsafe = &red_led; + led-running = &white_led; + led-upgrade = &red_led; + serial0 = &uart0; + }; + + chosen: chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0 0x40000000 0 0x20000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + + button-mesh { + label = "mesh"; + linux,code = ; + linux,input-type = ; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + red_led: red { + label = "red:status"; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + }; + + white_led: white { + label = "white:status"; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan3"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan1"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index deb084e9a..1ab3faa48 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -10,6 +10,7 @@ mediatek_setup_interfaces() case $board in abt,asr3000|\ cmcc,rax3000m*|\ + cmcc,xr30-nand|\ h3c,magic-nx30-pro|\ imou,lc-hx3001|\ nokia,ea0326gmp) @@ -98,6 +99,7 @@ mediatek_setup_macs() bananapi,bpi-r4) wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1) ;; + cmcc,xr30-nand|\ cmcc,rax3000m-emmc) wan_mac=$(mmc_get_mac_binary factory 0x2a) lan_mac=$(mmc_get_mac_binary factory 0x24) diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 811ed3cd6..3cd7bd071 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -316,6 +316,24 @@ define Device/cmcc_rax3000m-nand endef TARGET_DEVICES += cmcc_rax3000m-nand +define Device/cmcc_xr30-nand + DEVICE_VENDOR := CMCC + DEVICE_MODEL := XR30 NAND + DEVICE_VARIANT := (U-Boot mod) + DEVICE_DTS := mt7981b-cmcc-xr30-nand + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 116736k + KERNEL_IN_UBI := 1 + IMAGES += factory.bin + IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += cmcc_xr30-nand + define Device/cudy_tr3000-mod DEVICE_VENDOR := Cudy DEVICE_MODEL := TR3000