diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa72/base-files/etc/board.d/01_leds
index 809a64a60..d8cca08ca 100644
--- a/target/linux/mvebu/cortexa72/base-files/etc/board.d/01_leds
+++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/01_leds
@@ -7,9 +7,11 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+qnap,qhora-321|\
 iei,puzzle-m901)
 	ucidef_set_led_netdev "wan" "WAN" "white:network" "eth0" "link"
 	;;
+qnap,qhora-322|\
 iei,puzzle-m902)
 	ucidef_set_led_netdev "wan" "WAN" "white:network" "eth2" "link"
 	;;
diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
index 6a5861084..c5704c5a3 100644
--- a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
@@ -13,9 +13,11 @@ case "$board" in
 globalscale,mochabin)
 	ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "eth0 eth2"
 	;;
+qnap,qhora-321|\
 iei,puzzle-m901)
 	ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
 	;;
+qnap,qhora-322|\
 iei,puzzle-m902)
 	ucidef_set_interfaces_lan_wan "eth0 eth1 eth3 eth4 eth5 eth6 eth7 eth8" "eth2"
 	;;
diff --git a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh
index 5e5c356ed..5c184e529 100755
--- a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh
+++ b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/emmc-puzzle.sh
@@ -31,6 +31,8 @@ platform_do_upgrade_emmc() {
 
 	v "Writing new UUID to /dev/$diskdev..."
 	get_image_dd "$1" of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
+	
+	mkfs.ext4 -F -L rootfs_data $(find_mmc_part rootfs_data)
 
 	sleep 1
 }
diff --git a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
index dc964a311..527584f69 100755
--- a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
@@ -10,6 +10,8 @@ REQUIRE_IMAGE_METADATA=1
 platform_check_image() {
 	case "$(board_name)" in
 	globalscale,mochabin|\
+	qnap,qhora-321|\
+	qnap,qhora-322|\
 	iei,puzzle-m901|\
 	iei,puzzle-m902|\
 	marvell,armada8040-mcbin-doubleshot|\
@@ -25,6 +27,8 @@ platform_check_image() {
 
 platform_do_upgrade() {
 	case "$(board_name)" in
+	qnap,qhora-321|\
+	qnap,qhora-322|\
 	iei,puzzle-m901|\
 	iei,puzzle-m902)
 		platform_do_upgrade_emmc "$1"
@@ -43,6 +47,8 @@ platform_do_upgrade() {
 platform_copy_config() {
 	case "$(board_name)" in
 	globalscale,mochabin|\
+	qnap,qhora-321|\
+	qnap,qhora-322|\
 	iei,puzzle-m901|\
 	iei,puzzle-m902|\
 	marvell,armada8040-mcbin-doubleshot|\
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-db-A.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-db-A.dts
new file mode 100644
index 000000000..4f84d036f
--- /dev/null
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-db-A.dts
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "QNAP QHora-321";
+	compatible = "qnap,qhora-321",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " root=/dev/mmcblk0p3";
+	};
+
+	aliases {
+		i2c0 = &cp1_i2c0;
+		i2c1 = &cp0_i2c0;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		ethernet3 = &cp1_eth0;
+		ethernet4 = &cp1_eth1;
+		ethernet5 = &cp1_eth2;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		led-boot = &led_power;
+		led-failsafe = &led_info;
+		led-running = &led_power;
+		led-upgrade = &led_info;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&cp0_uart0 {
+	status = "okay";
+
+	puzzle-mcu {
+		compatible = "iei,wt61p803-puzzle";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		current-speed = <115200>;
+		enable-beep;
+		status = "okay";
+
+		leds {
+			compatible = "iei,wt61p803-puzzle-leds";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			led@0 {
+				reg = <0>;
+				label = "white:network";
+				active-low;
+			};
+
+			led@1 {
+				reg = <1>;
+				label = "green:cloud";
+				active-low;
+			};
+
+			led_info: led@2 {
+				reg = <2>;
+				label = "orange:info";
+				active-low;
+			};
+
+			led_power: led@3 {
+				reg = <3>;
+				label = "yellow:power";
+				active-low;
+				default-state = "on";
+			};
+		};
+
+		hwmon {
+			compatible = "iei,wt61p803-puzzle-hwmon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			chassis_fan_group0: fan-group@0 {
+				#cooling-cells = <2>;
+				reg = <0x00>;
+				cooling-levels = <64 102 170 230 250>;
+			};
+		};
+	};
+};
+
+&ap_thermal_cpu1 {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <44000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+	cooling-maps {
+		fan-map {
+			trip = <&cpu_active>;
+			cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	bus-width = <8>;
+	status = "okay";
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+};
+
+&cp0_crypto {
+	status = "okay";
+};
+
+&cp0_xmdio {
+	status = "okay";
+	cp0_nbaset_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <2>;
+	};
+	cp0_nbaset_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+	cp0_nbaset_phy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy2 0>;
+	phy = <&cp0_nbaset_phy0>;
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy4 1>;
+	phy = <&cp0_nbaset_phy1>;
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy5 2>;
+	phy = <&cp0_nbaset_phy2>;
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+		wakeup-source;
+	};
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+	status = "okay";
+	num-lanes = <2>;
+	num-viewport = <8>;
+	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>;
+};
+
+/* U55 */
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+	reg = <0x700680 0x50>,          /* control */
+	      <0x2000000 0x1000000>;    /* CS0 */
+	status = "okay";
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <40000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x1f0000>;
+			};
+			partition@1f0000 {
+				label = "U-Boot ENV Factory";
+				reg = <0x1f0000 0x10000>;
+			};
+			partition@200000 {
+				label = "Reserved";
+				reg = <0x200000 0x1f0000>;
+			};
+			partition@3f0000 {
+				label = "U-Boot ENV";
+				reg = <0x3f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		cp0_i2c0_pins: cp0-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp0_i2c1_pins: cp0-i2c-pins-1 {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+		cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+			marvell,pins = "mpp0", "mpp1", "mpp2",
+				       "mpp3", "mpp4", "mpp5",
+				       "mpp6", "mpp7", "mpp8",
+				       "mpp9", "mpp10", "mpp11";
+			marvell,function = "ge0";
+		};
+		cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+			marvell,pins = "mpp44", "mpp45", "mpp46",
+				       "mpp47", "mpp48", "mpp49",
+				       "mpp50", "mpp51", "mpp52",
+				       "mpp53", "mpp54", "mpp55";
+			marvell,function = "ge1";
+		};
+		cp0_spi0_pins: cp0-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+	};
+};
+
+/*
+ * Instantiate the first connected CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f6600000
+#define CP11X_PCIE1_BASE	f6620000
+#define CP11X_PCIE2_BASE	f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+	status = "okay";
+};
+
+&cp1_xmdio {
+	status = "okay";
+	cp1_nbaset_phy0: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <2>;
+	};
+	cp1_nbaset_phy1: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+	cp1_nbaset_phy2: ethernet-phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy2 0>;
+	phy = <&cp1_nbaset_phy0>;
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy4 1>;
+	phy = <&cp1_nbaset_phy1>;
+};
+
+&cp1_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy5 2>;
+	phy = <&cp1_nbaset_phy2>;
+};
+
+&cp1_sata0 {
+	status = "okay";
+	sata-port@1 {
+		status = "okay";
+		phys = <&cp1_comphy0 1>;
+	};
+};
+
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		cp1_i2c0_pins: cp1-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp1_spi0_pins: cp1-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+		cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+			marvell,pins = "mpp3";
+			marvell,function = "gpio";
+		};
+		cp1_sfp_pins: sfp-pins {
+			marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+&cp1_usb3_1 {
+	status = "okay";
+	phys = <&cp1_comphy3 1>;
+	phy-names = "usb";
+};
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts
index 80d876b4a..4c1ca8c10 100644
--- a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts
@@ -17,6 +17,7 @@
 
 	chosen {
 		stdout-path = "serial0:115200n8";
+		bootargs-append = " root=/dev/mmcblk0p3";
 	};
 
 	aliases {
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-db-A.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-db-A.dts
new file mode 100644
index 000000000..cd844552d
--- /dev/null
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-db-A.dts
@@ -0,0 +1,565 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "QNAP QHora-322";
+	compatible = "qnap,qhora-322",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " root=/dev/mmcblk0p3";
+	};
+
+	aliases {
+		i2c0 = &cp1_i2c0;
+		i2c1 = &cp0_i2c0;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		gpio5 = &cp2_gpio1;
+		gpio6 = &cp2_gpio2;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		ethernet3 = &cp1_eth0;
+		ethernet4 = &cp1_eth1;
+		ethernet5 = &cp1_eth2;
+		ethernet6 = &cp2_eth0;
+		ethernet7 = &cp2_eth1;
+		ethernet8 = &cp2_eth2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+		led-boot = &led_power;
+		led-failsafe = &led_info;
+		led-running = &led_power;
+		led-upgrade = &led_info;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp2-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp2_usb3_0_phy0: cp2_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp2_reg_usb3_vbus0>;
+	};
+
+	cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp2-xhci1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp2_usb3_0_phy1: cp2_usb3_phy1 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp2_reg_usb3_vbus1>;
+	};
+
+	cp2_sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp2_sfpp0_i2c>;
+		los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&cp0_uart0 {
+	status = "okay";
+
+	puzzle-mcu {
+		compatible = "iei,wt61p803-puzzle";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		current-speed = <115200>;
+		enable-beep;
+		status = "okay";
+
+		leds {
+			compatible = "iei,wt61p803-puzzle-leds";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			led@0 {
+				reg = <0>;
+				label = "white:network";
+				active-low;
+			};
+
+			led@1 {
+				reg = <1>;
+				label = "green:cloud";
+				active-low;
+			};
+
+			led_info: led@2 {
+				reg = <2>;
+				label = "orange:info";
+				active-low;
+			};
+
+			led_power: led@3 {
+				reg = <3>;
+				label = "yellow:power";
+				active-low;
+				default-state = "on";
+			};
+		};
+
+		hwmon {
+			compatible = "iei,wt61p803-puzzle-hwmon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			chassis_fan_group0: fan-group@0 {
+				#cooling-cells = <2>;
+				reg = <0x00>;
+				cooling-levels = <64 102 170 230 250>;
+			};
+		};
+	};
+};
+
+&ap_thermal_cpu1 {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <44000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+	cooling-maps {
+		fan-map {
+			trip = <&cpu_active>;
+			cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	bus-width = <8>;
+	status = "okay";
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+};
+
+&cp0_crypto {
+	status = "okay";
+};
+
+&cp0_xmdio {
+	status = "okay";
+	cp0_nbaset_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <2>;
+	};
+	cp0_nbaset_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+	cp0_nbaset_phy2: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+	phys = <&cp0_comphy2 0>;
+	phy = <&cp0_nbaset_phy0>;
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy4 1>;
+	phy = <&cp0_nbaset_phy1>;
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy1 2>;
+	phy = <&cp0_nbaset_phy2>;
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+		wakeup-source;
+	};
+};
+
+&cp0_i2c1 {
+	clock-frequency = <100000>;
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_sata0 {
+	status = "okay";
+	sata-port@1 {
+		status = "okay";
+		phys = <&cp0_comphy0 1>;
+	};
+};
+
+&cp0_pcie2 {
+	status = "okay";
+	num-lanes = <1>;
+	num-viewport = <8>;
+	phys = <&cp0_comphy5 2>;
+};
+
+/* U55 */
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+	reg = <0x700680 0x50>,          /* control */
+	      <0x2000000 0x1000000>;    /* CS0 */
+	status = "okay";
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <40000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x1f0000>;
+			};
+			partition@1f0000 {
+				label = "U-Boot ENV Factory";
+				reg = <0x1f0000 0x10000>;
+			};
+			partition@200000 {
+				label = "Reserved";
+				reg = <0x200000 0x1f0000>;
+			};
+			partition@3f0000 {
+				label = "U-Boot ENV";
+				reg = <0x3f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		cp0_i2c0_pins: cp0-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp0_i2c1_pins: cp0-i2c-pins-1 {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+		cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+			marvell,pins = "mpp0", "mpp1", "mpp2",
+				       "mpp3", "mpp4", "mpp5",
+				       "mpp6", "mpp7", "mpp8",
+				       "mpp9", "mpp10", "mpp11";
+			marvell,function = "ge0";
+		};
+		cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+			marvell,pins = "mpp44", "mpp45", "mpp46",
+				       "mpp47", "mpp48", "mpp49",
+				       "mpp50", "mpp51", "mpp52",
+				       "mpp53", "mpp54", "mpp55";
+			marvell,function = "ge1";
+		};
+		cp0_spi0_pins: cp0-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+	};
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	phys = <&cp0_comphy3 1>;
+	phy-names = "usb";
+};
+
+/*
+ * Instantiate the first connected CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+	status = "okay";
+};
+
+&cp1_xmdio {
+	status = "okay";
+	cp1_nbaset_phy0: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <2>;
+	};
+	cp1_nbaset_phy1: ethernet-phy@4 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+	cp1_nbaset_phy2: ethernet-phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+	phys = <&cp1_comphy2 0>;
+	phy = <&cp1_nbaset_phy0>;
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy4 1>;
+	phy = <&cp1_nbaset_phy1>;
+};
+
+&cp1_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy1 2>;
+	phy = <&cp1_nbaset_phy2>;
+};
+
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		cp1_i2c0_pins: cp1-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp1_spi0_pins: cp1-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+		cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+			marvell,pins = "mpp3";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+/*
+ * Instantiate the second connected CP115
+ */
+
+#define CP11X_NAME		cp2
+#define CP11X_BASE		f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f6600000
+#define CP11X_PCIE1_BASE	f6620000
+#define CP11X_PCIE2_BASE	f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp2_crypto {
+	status = "okay";
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+&cp2_xmdio {
+	status = "okay";
+	cp2_nbaset_phy0: ethernet-phy@6 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <2>;
+	};
+	cp2_nbaset_phy1: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+	cp2_nbaset_phy2: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+	};
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-kr";
+	phys = <&cp2_comphy2 0>;
+	phy = <&cp2_nbaset_phy0>;
+};
+
+&cp2_eth1 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp2_comphy4 1>;
+	phy = <&cp2_nbaset_phy1>;
+};
+
+&cp2_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp2_comphy1 2>;
+	phy = <&cp2_nbaset_phy2>;
+};
+
+&cp2_gpio1 {
+	status = "okay";
+};
+
+&cp2_gpio2 {
+	status = "okay";
+};
+
+&cp2_i2c0 {
+	clock-frequency = <100000>;
+	/* SLM-1521-V2 - U3 */
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		cp2_sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* U12 */
+			cp2_module_expander1: pca9555@21 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x21>;
+			};
+		};
+	};
+};
+
+&cp2_syscon0 {
+	cp2_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+		cp2_i2c0_pins: cp2-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+	};
+};
diff --git a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts
index fd99eb2d1..c54fb960e 100644
--- a/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts
+++ b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts
@@ -17,6 +17,7 @@
 
 	chosen {
 		stdout-path = "serial0:115200n8";
+		bootargs-append = " root=/dev/mmcblk0p3";
 	};
 
 	aliases {
diff --git a/target/linux/mvebu/image/Makefile b/target/linux/mvebu/image/Makefile
index b0498d34c..09f8d9635 100644
--- a/target/linux/mvebu/image/Makefile
+++ b/target/linux/mvebu/image/Makefile
@@ -39,6 +39,16 @@ define Build/boot-img-ext4
 		$@.bootimg $@.boot
 endef
 
+define Build/boot-qnap-img-ext4
+	rm -fR $@.boot
+	mkdir -p $@.boot
+	$(foreach dts,$(DEVICE_DTS), $(CP) $(KDIR)/image-$(dts).dtb $@.boot/$(dts).dtb;)
+	$(CP) $(KDIR)/vmlinux $@.boot/Image
+	make_ext4fs -J -L kernel -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M \
+		$(if $(SOURCE_DATE_EPOCH),-T $(SOURCE_DATE_EPOCH)) \
+		$@.bootimg $@.boot
+endef
+
 define Build/buffalo-kernel-jffs2
 	rm -rf $(KDIR)/kernel_jffs2 $@.fakerd
 	mkdir -p $(KDIR)/kernel_jffs2
diff --git a/target/linux/mvebu/image/cortexa72.mk b/target/linux/mvebu/image/cortexa72.mk
index 47d958b2f..4ef5a4705 100644
--- a/target/linux/mvebu/image/cortexa72.mk
+++ b/target/linux/mvebu/image/cortexa72.mk
@@ -78,3 +78,15 @@ define Device/iei_puzzle-m902
   SOC := cn9132
 endef
 TARGET_DEVICES += iei_puzzle-m902
+
+define Device/qnap_qhora-32x
+  $(call Device/Default-arm64)
+  SOC := cn9132
+  DEVICE_VENDOR := QNAP
+  DEVICE_MODEL := QHora-321/322
+  DEVICE_PACKAGES += kmod-rtc-ds1307
+  DEVICE_DTS := cn9131-db-A cn9131-puzzle-m901 cn9132-db-A cn9132-puzzle-m902
+  SUPPORTED_DEVICES := qnap,qhora-321 qnap,qhora-322 iei,puzzle-m901 iei,puzzle-m902
+  IMAGE/sdcard.img.gz := boot-scr | boot-qnap-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+endef
+TARGET_DEVICES += qnap_qhora-32x