mirror of
https://github.com/coolsnowwolf/lede.git
synced 2025-04-16 14:23:38 +00:00
ipq40xx: add support for ASUS RT-AC1300UHP
This commit is contained in:
coolsnowwolf
parent
672de411f7
commit
a2c35427b9
@ -11,6 +11,7 @@ board=$(board_name)
|
||||
boardname="${board##*,}"
|
||||
|
||||
case "$board" in
|
||||
asus,rt-ac1300uhp |\
|
||||
asus,rt-ac58u)
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2G" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5G" "phy1tpt"
|
||||
|
||||
@ -12,6 +12,7 @@ board_config_update
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
asus,rt-ac1300uhp |\
|
||||
asus,rt-ac58u |\
|
||||
asus,rt-acrh17)
|
||||
ucidef_add_switch "switch0" \
|
||||
|
||||
@ -128,6 +128,7 @@ case "$FIRMWARE" in
|
||||
qcom,ap-dk01.1-c1)
|
||||
ath10kcal_extract "ART" 4096 12064
|
||||
;;
|
||||
asus,rt-ac1300uhp |\
|
||||
asus,rt-acrh17|\
|
||||
asus,rt-ac58u)
|
||||
CI_UBIPART=UBI_DEV
|
||||
@ -165,6 +166,7 @@ case "$FIRMWARE" in
|
||||
qcom,ap-dk01.1-c1)
|
||||
ath10kcal_extract "ART" 20480 12064
|
||||
;;
|
||||
asus,rt-ac1300uhp |\
|
||||
asus,rt-ac58u)
|
||||
CI_UBIPART=UBI_DEV
|
||||
ath10kcal_ubi_extract "Factory" 20480 12064
|
||||
|
||||
@ -162,6 +162,7 @@ platform_do_upgrade() {
|
||||
8dev,jalapeno)
|
||||
nand_do_upgrade "$ARGV"
|
||||
;;
|
||||
asus,rt-ac1300uhp |\
|
||||
asus,rt-acrh17|\
|
||||
asus,rt-ac58u)
|
||||
local magic=$(get_magic_long "$1")
|
||||
|
||||
@ -0,0 +1,297 @@
|
||||
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "qcom-ipq4019.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
model = "ASUS RT-AC1300UHP";
|
||||
compatible = "asus,rt-ac1300uhp", "qcom,ipq4019";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &power;
|
||||
led-failsafe = &power;
|
||||
led-running = &power;
|
||||
led-upgrade = &power;
|
||||
};
|
||||
|
||||
soc {
|
||||
mdio@90000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ess-psgmii@98000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
tcsr@1949000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1949000 0x100>;
|
||||
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
||||
};
|
||||
|
||||
tcsr@194b000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x194b000 0x100>;
|
||||
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
||||
};
|
||||
|
||||
ess_tcsr@1953000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1953000 0x1000>;
|
||||
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
||||
};
|
||||
|
||||
tcsr@1957000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1957000 0x100>;
|
||||
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
||||
};
|
||||
|
||||
usb2@60f8800 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@78af000 {
|
||||
pinctrl-0 = <&serial_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3@8af8800 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
crypto@8e3a000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wifi@a000000 {
|
||||
status = "okay";
|
||||
qcom,ath10k-calibration-variant = "RT-AC58U";
|
||||
};
|
||||
|
||||
wifi@a800000 {
|
||||
status = "okay";
|
||||
qcom,ath10k-calibration-variant = "RT-AC58U";
|
||||
};
|
||||
|
||||
watchdog@b017000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ess-switch@c000000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
edma@c080000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power: status {
|
||||
label = "rt-ac58u:blue:status";
|
||||
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "rt-ac58u:blue:wan";
|
||||
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wlan2G {
|
||||
label = "rt-ac58u:blue:wlan2G";
|
||||
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan5G {
|
||||
label = "rt-ac58u:blue:wlan5G";
|
||||
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "rt-ac58u:blue:usb";
|
||||
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "rt-ac58u:blue:lan";
|
||||
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
serial_pins: serial_pinmux {
|
||||
mux {
|
||||
pins = "gpio60", "gpio61";
|
||||
function = "blsp_uart0";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_0_pins: spi_0_pinmux {
|
||||
mux {
|
||||
function = "blsp_spi0";
|
||||
pins = "gpio55", "gpio56", "gpio57";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
mux_cs {
|
||||
function = "gpio";
|
||||
pins = "gpio54", "gpio59";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_spi1 { /* BLSP1 QUP1 */
|
||||
pinctrl-0 = <&spi_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
|
||||
<&tlmm 59 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
/*
|
||||
* U-boot looks for "n25q128a11" node,
|
||||
* if we don't have it, it will spit out the following warning:
|
||||
* "ipq: fdt fixup unable to find compatible node".
|
||||
*/
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
|
||||
spi-max-frequency = <24000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition0@0 {
|
||||
label = "SBL1";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition1@40000 {
|
||||
label = "MIBIB";
|
||||
reg = <0x00040000 0x00020000>;
|
||||
read-only;
|
||||
};
|
||||
partition2@60000 {
|
||||
label = "QSEE";
|
||||
reg = <0x00060000 0x00060000>;
|
||||
read-only;
|
||||
};
|
||||
partition3@c0000 {
|
||||
label = "CDT";
|
||||
reg = <0x000c0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
partition4@d0000 {
|
||||
label = "DDRPARAMS";
|
||||
reg = <0x000d0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
partition5@e0000 {
|
||||
label = "APPSBLENV"; /* uboot env*/
|
||||
reg = <0x000e0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
partition5@f0000 {
|
||||
label = "APPSBL"; /* uboot */
|
||||
reg = <0x000f0000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
partition5@170000 {
|
||||
label = "ART";
|
||||
reg = <0x00170000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
/* 0x00180000 - 0x00200000 unused */
|
||||
};
|
||||
};
|
||||
|
||||
mt29f@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "spinand,mt29f";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <24000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition0@0 {
|
||||
label = "ubi";
|
||||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_ss_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_hs_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_hs_phy {
|
||||
status = "okay";
|
||||
};
|
||||
@ -78,6 +78,23 @@ define Device/asus_rt-ac58u
|
||||
endef
|
||||
TARGET_DEVICES += asus_rt-ac58u
|
||||
|
||||
define Device/asus_rt-ac1300uhp
|
||||
$(call Device/FitImageLzma)
|
||||
DEVICE_DTS := qcom-ipq4018-rt-ac1300uhp
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DTB_SIZE := 65536
|
||||
DEVICE_TITLE := Asus RT-AC1300UHP
|
||||
IMAGE_SIZE := 20439364
|
||||
FILESYSTEMS := squashfs
|
||||
UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
|
||||
KERNEL_INITRAMFS := $$(KERNEL) | uImage none
|
||||
KERNEL_INITRAMFS_SUFFIX := -factory.trx
|
||||
IMAGES := sysupgrade.bin
|
||||
DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
|
||||
endef
|
||||
TARGET_DEVICES += asus_rt-ac1300uhp
|
||||
|
||||
define Device/asus_rt-acrh17
|
||||
$(call Device/FitImageLzma)
|
||||
DEVICE_DTS := qcom-ipq4019-rt-acrh17
|
||||
|
||||
@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
||||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -697,7 +697,21 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
@@ -697,7 +697,22 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-apq8074-dragonboard.dtb \
|
||||
qcom-apq8084-ifc6540.dtb \
|
||||
qcom-apq8084-mtp.dtb \
|
||||
@ -21,6 +21,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
||||
+ qcom-ipq4018-jalapeno.dtb \
|
||||
+ qcom-ipq4018-nbg6617.dtb \
|
||||
+ qcom-ipq4018-rt-ac58u.dtb \
|
||||
+ qcom-ipq4018-rt-ac1300uhp.dtb \
|
||||
+ qcom-ipq4018-wre6606.dtb \
|
||||
qcom-ipq4019-ap.dk01.1-c1.dtb \
|
||||
+ qcom-ipq4019-a62.dtb \
|
||||
|
||||
Loading…
Reference in New Issue
Block a user