From 9f11bc9d8933af1d99b520247f275d6c048aba5e Mon Sep 17 00:00:00 2001 From: coolsnowwolf Date: Wed, 28 May 2025 16:50:27 +0800 Subject: [PATCH] mediatek: filogic: add support for HUASIFEI WS3006 --- .../mediatek/dts/mt7981b-huasifei-ws3006.dts | 276 ++++++++++++++++++ .../filogic/base-files/etc/board.d/02_network | 8 + .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 5 + target/linux/mediatek/image/filogic.mk | 15 + 4 files changed, 304 insertions(+) create mode 100644 target/linux/mediatek/dts/mt7981b-huasifei-ws3006.dts diff --git a/target/linux/mediatek/dts/mt7981b-huasifei-ws3006.dts b/target/linux/mediatek/dts/mt7981b-huasifei-ws3006.dts new file mode 100644 index 000000000..29e55c69a --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-huasifei-ws3006.dts @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include + +#include "mt7981.dtsi" + +/ { + model = "HUASIFEI WS3006"; + compatible = "huasifei,ws3006", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac0; + led-boot = &status_led; + led-failsafe = &status_led; + led-running = &status_led; + led-upgrade = &status_led; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + status_led: led-0 { + label = "green:status"; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + }; + + led-1 { + label = "green:sim1"; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + led-2 { + label = "green:sim2"; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-3 { + label = "green:gbe"; + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + + led-4 { + label = "green:5g"; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-5 { + label = "green:wlan"; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + led-6 { + label = "green:4g"; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +ð { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "2500base-x"; + phy-handle = <&phy0>; + label = "lan3"; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id03a2.9461"; + reg = <0>; + phy-mode = "gmii"; + nvmem-cells = <&phy_calibration>; + nvmem-cell-names = "phy-cal-data"; + }; + + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <6>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 3 GPIO_ACTIVE_LOW>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <52000000>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x0 0x100000>; /* 1 MiB */ + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; /* 0.5 MiB */ + }; + + factory: partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; /* 2 MiB */ + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; /* 2 MiB */ + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x6e00000>; /* 110 MiB */ + }; + + partition@7380000 { + label = "config"; + reg = <0x7380000 0x80000>; /* 0.5 MiB */ + }; + + /* Leave last 12 MiB for NMBM badblock table */ + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "2500base-x"; + phy-handle = <&phy1>; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&wifi { + status = "okay"; + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; +}; \ No newline at end of file diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 5f311c2a4..1202a80fa 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -61,6 +61,9 @@ mediatek_setup_interfaces() hf,m7986r1*) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "lan1 usb0" ;; + huasifei,ws3006*) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" + ;; mediatek,mt7986a-rfb|\ mediatek,mt7986b-rfb) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" eth1 @@ -128,6 +131,11 @@ mediatek_setup_macs() lan_mac=$(macaddr_add "$wan_mac" 1) label_mac=$wan_mac ;; + huasifei,ws3006) + wifi_mac=$(mtd_get_mac_binary Factory 0x4) + lan_mac=$(macaddr_add "$wifi_mac" 1) + wan_mac=$(macaddr_add "$wifi_mac" 2) + ;; imou,lc-hx3001) lan_mac=$(mtd_get_mac_ascii u-boot-env mac) wan_mac=$(macaddr_add "$lan_mac" 2) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 137d8edd7..788fe5a6d 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -61,6 +61,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress ;; + huasifei,ws3006) + addr=$(mtd_get_mac_binary_ubi Factory 0x04) + [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress + ;; imou,lc-hx3001) addr=$(mtd_get_mac_ascii u-boot-env mac) [ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 2569d0b73..03c6709a2 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -518,6 +518,21 @@ define Device/huasifei_wh3000-emmc endef TARGET_DEVICES += huasifei_wh3000-emmc +define Device/huasifei_ws3006 + DEVICE_VENDOR := Huasifei + DEVICE_MODEL := WS3006 + DEVICE_DTS := mt7981b-huasifei-ws3006 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 112640k + KERNEL_IN_UBI := 1 + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += huasifei_ws3006 + define Device/hf_m7986r1-emmc DEVICE_VENDOR := HF DEVICE_MODEL := M7986R1 (eMMC)