ramips: add support for OrayBox X3A

target/linux/ramips/dts/mt7621_oraybox_x3a.dts

@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "oraybox,x3a", "mediatek,mt7621-soc";
+	model = "OrayBox X3A";
+
+	aliases {
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_blue;
+		led-upgrade = &led_status_green;
+		label-mac-device = &gmac0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: status-red {
+			label = "red:status";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led_status_blue: status-blue {
+			label = "blue:status";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led_status_green: status-green {
+			label = "green:status";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+				read-only;
+			};
+
+			factory: partition@40000 {
+				label = "factory";
+				reg = <0x40000 0x10000>;
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x50000 0xf00000>;
+			};
+
+			partition@fe0000 {
+				label = "bdinfo";
+				reg = <0xfe0000 0x10000>;
+				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				macaddr_bdinfo_9: macaddr@9 {
+					reg = <0x9 0x6>;
+				};
+			};
+
+			partition@ff0000 {
+				label = "reserve";
+				reg = <0xff0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
+		reg = <0x0000 0 0 0 0>;
+		mediatek,mtd-eeprom = <&factory 0x0>;
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&macaddr_bdinfo_9>;
+	nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+	ports {		
+		port@2 {
+			status = "okay";
+			label = "lan2";
+		};
+
+		port@3 {
+			status = "okay";
+			label = "lan1";
+		};
+
+		port@4 {
+			status = "okay";
+			label = "wan";
+			nvmem-cells = <&macaddr_bdinfo_9>;
+			nvmem-cell-names = "mac-address";
+			mac-address-increment = <1>;
+		};
+	};
+};
+
+&state_default {
+	gpio {
+		groups = "jtag", "wdt";
+		function = "gpio";
+	};
+};

target/linux/ramips/image/mt7621.mk

@@ -1221,6 +1221,16 @@ define Device/netis_wf2881
 endef
 TARGET_DEVICES += netis_wf2881
 
+define Device/oraybox_x3a
+  $(Device/dsa-migration)
+  $(Device/uimage-lzma-loader)
+  IMAGE_SIZE := 15360k
+  DEVICE_VENDOR := OrayBox
+  DEVICE_MODEL := X3A
+  DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
+endef
+TARGET_DEVICES += oraybox_x3a
+
 define Device/phicomm_k2p
   IMAGE_SIZE := 15744k
   DEVICE_VENDOR := Phicomm

target/linux/ramips/mt7621/base-files/etc/board.d/01_leds

@@ -100,6 +100,10 @@ netgear,r6800)
 	ucidef_set_led_netdev "lan3" "LAN3" "white:lan3" "lan3"
 	ucidef_set_led_netdev "lan4" "LAN4" "white:lan4" "lan4"
 	;;
+oraybox,x3a)
+	ucidef_set_led_netdev "wan" "wan link" "red:status" "wan"
+	ucidef_set_led_netdev "lan" "lan link" "green:status" "br-lan"
+	;;
 tplink,archer-a6-v3|\
 tplink,archer-c6-v3|\
 tplink,archer-c6u-v1)

target/linux/ramips/mt7621/base-files/etc/board.d/02_network

@@ -200,7 +200,8 @@ ramips_setup_macs()
 	mikrotik,routerboard-750gr3|\
 	mikrotik,routerboard-760igs|\
 	mikrotik,routerboard-m11g|\
-	mikrotik,routerboard-m33g)
+	mikrotik,routerboard-m33g|\
+	oraybox,x3a)
 		label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base")
 		wan_mac=$label_mac
 		lan_mac=$(macaddr_add $label_mac 1)

target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

@@ -40,6 +40,12 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
 		;;
+	oraybox,x3a)
+		if [ "$PHYNBR" = "1" ]; then
+			hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+			macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress
+		fi
+		;;
 	raisecom,msg1500-x-00)
 		if [ "$PHYNBR" = "0" ]; then
 			base_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 0x4)" 1)