From 96bab7c8f96657b2df9e354eead11b797dfa276d Mon Sep 17 00:00:00 2001 From: coolsnowwolf Date: Mon, 31 Dec 2018 11:33:21 +0800 Subject: [PATCH] Revert "ipq806x: add support for Buffalo WXR-2533DHP" This reverts commit a3057c7d652b660f1e248f55c0c0301592e5f643. --- target/linux/ipq806x/Makefile | 2 +- .../ipq806x/base-files/etc/board.d/01_leds | 4 - .../ipq806x/base-files/etc/board.d/02_network | 6 - target/linux/ipq806x/base-files/etc/diag.sh | 46 ++ .../etc/hotplug.d/firmware/11-ath10k-caldata | 68 +-- .../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 44 +- .../ipq806x/base-files/lib/upgrade/buffalo.sh | 139 ----- .../base-files/lib/upgrade/platform.sh | 4 - .../arch/arm/boot/dts/qcom-ipq8064-ap161.dts | 277 --------- .../arm/boot/dts/qcom-ipq8064-wg2600hp.dts | 576 +++++++++--------- .../arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts | 535 ---------------- .../arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 +- target/linux/ipq806x/image/Makefile | 63 +- .../0069-arm-boot-add-dts-files.patch | 4 +- 14 files changed, 388 insertions(+), 1384 deletions(-) create mode 100755 target/linux/ipq806x/base-files/etc/diag.sh delete mode 100644 target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh delete mode 100644 target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts delete mode 100644 target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts diff --git a/target/linux/ipq806x/Makefile b/target/linux/ipq806x/Makefile index 129ea2cda..d78f653d3 100644 --- a/target/linux/ipq806x/Makefile +++ b/target/linux/ipq806x/Makefile @@ -20,7 +20,7 @@ DEFAULT_PACKAGES += \ kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform \ kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \ kmod-usb3 kmod-usb-dwc3-of-simple kmod-usb-phy-qcom-dwc3 \ - kmod-ath10k-ct wpad-basic \ + kmod-ath10k wpad-basic \ uboot-envtools $(eval $(call BuildTarget)) diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index 509d334c4..769afb8b8 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -11,10 +11,6 @@ board=$(board_name) boardname="${board##*,}" case "$board" in -buffalo,wxr-2533dhp) - ucidef_set_led_wlan "wlan" "WLAN" "${boardname}:white:wireless" "phy0tpt" - ucidef_set_led_switch "wan" "WAN" "${boardname}:white:internet" "switch0" "0x20" - ;; compex,wpq864) ucidef_set_led_usbport "usb" "USB" "wpq864:green:usb" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "pcie-usb" "PCIe USB" "wpq864:green:usb-pcie" "usb3-port1" diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index a3aa0fce7..786c6f70e 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -12,7 +12,6 @@ board_config_update board=$(board_name) case "$board" in -buffalo,wxr-2533dhp |\ compex,wpq864 |\ netgear,d7800 |\ netgear,r7500 |\ @@ -22,11 +21,6 @@ tplink,vr2600v) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" ;; -qcom,ipq8064-ap161) - ucidef_set_interface_lan "eth1 eth2" - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0" - ;; linksys,ea8500) hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) ucidef_add_switch "switch0" \ diff --git a/target/linux/ipq806x/base-files/etc/diag.sh b/target/linux/ipq806x/base-files/etc/diag.sh new file mode 100755 index 000000000..9e6b4918e --- /dev/null +++ b/target/linux/ipq806x/base-files/etc/diag.sh @@ -0,0 +1,46 @@ +#!/bin/sh +# Copyright (C) 2016 Henryk Heisig hyniu@o2.pl + +. /lib/functions/leds.sh + +boot="$(get_dt_led boot)" +failsafe="$(get_dt_led failsafe)" +running="$(get_dt_led running)" +upgrade="$(get_dt_led upgrade)" + +set_state() { + status_led="$boot" + + case "$1" in + preinit) + status_led_blink_preinit + ;; + failsafe) + status_led_off + [ -n "$running" ] && { + status_led="$running" + status_led_off + } + status_led="$failsafe" + status_led_blink_failsafe + ;; + preinit_regular) + status_led_blink_preinit_regular + ;; + upgrade) + [ -n "$running" ] && { + status_led="$running" + status_led_off + } + status_led="$upgrade" + status_led_blink_preinit_regular + ;; + done) + status_led_off + [ -n "$running" ] && { + status_led="$running" + status_led_on + } + ;; + esac +} diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index e05f2b2c7..fa49c250f 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -1,21 +1,5 @@ #!/bin/sh -# xor multiple hex values of the same length -xor() { - local val - local ret="0x$1" - local retlen=${#1} - - shift - while [ -n "$1" ]; do - val="0x$1" - ret=$((ret ^ val)) - shift - done - - printf "%0${retlen}x" "$ret" -} - ath10kcal_die() { echo "ath10cal: " "$*" exit 1 @@ -44,29 +28,12 @@ ath10kcal_extract() { ath10kcal_die "failed to extract calibration data from $mtd" } -ath10kcal_patch_mac_crc() { +ath10kcal_patch_mac() { local mac=$1 - local mac_offset=6 - local chksum_offset=2 - local xor_mac - local xor_fw_mac - local xor_fw_chksum [ -z "$mac" ] && return - xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE) - xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}" - macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6 - - xor_mac=${mac//:/} - xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}" - - xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE) - xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac) - - printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \ - dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2 } [ -e /lib/firmware/$FIRMWARE ] && exit 0 @@ -76,72 +43,53 @@ ath10kcal_patch_mac_crc() { board=$(board_name) + case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in - buffalo,wxr-2533dhp) - ath10kcal_extract "ART" 4096 12064 - ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 30) - ;; linksys,ea8500) + hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) ath10kcal_extract "art" 4096 12064 - ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1) - ;; - nec,wg2600hp) - ath10kcal_extract "ART" 4096 12064 - ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 12) +1) ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) ath10kcal_extract "art" 4096 12064 - ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 6) +1) ;; tplink,c2600) ath10kcal_extract "radio" 4096 12064 - ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1) +# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1) ;; + nec,wg2600hp |\ tplink,vr2600v) ath10kcal_extract "ART" 4096 12064 - ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0) -1) ;; zyxel,nbg6817) ath10kcal_extract "0:ART" 4096 12064 - ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1) ;; esac ;; "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in - buffalo,wxr-2533dhp) - ath10kcal_extract "ART" 20480 12064 - ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 24) - ;; linksys,ea8500) + hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) ath10kcal_extract "art" 20480 12064 - ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2) - ;; - nec,wg2600hp) - ath10kcal_extract "ART" 20480 12064 - ath10kcal_patch_mac_crc $(mtd_get_mac_binary PRODUCTDATA 12) ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) ath10kcal_extract "art" 20480 12064 - ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 6) +2) ;; tplink,c2600) ath10kcal_extract "radio" 20480 12064 - ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 8) +# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2) ;; + nec,wg2600hp |\ tplink,vr2600v) ath10kcal_extract "ART" 20480 12064 - ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0) ;; zyxel,nbg6817) ath10kcal_extract "0:ART" 20480 12064 - ath10kcal_patch_mac_crc $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) ;; esac ;; diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 4b476e56a..afa425f07 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -9,23 +9,29 @@ PHYNBR=${DEVPATH##*/phy} . /lib/functions.sh . /lib/functions/system.sh -OPATH=${DEVPATH##/devices/platform/} -OPATH=${OPATH%%/ieee*} +board=$(board_name) -# 10 radios is enough for anyone! -for i in `seq 0 9`; - do - BUS=`uci get wireless.@wifi-device[$i].path` - if [ "$BUS " == "$OPATH " ] - then - PHYNAME=${DEVPATH##*ieee80211/} - NPHYNAME=`uci get wireless.@wifi-device[$i].phyname` - if [ "$NPHYNAME " != " " ] - then - if [ "$PHYNAME " != "$NPHYNAME " ] - then - iw $PHYNAME set name $NPHYNAME - fi - fi - fi -done +case "$board" in + linksys,ea8500) + echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress + ;; + nec,wg2600hp) + echo $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 12) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress + ;; + netgear,d7800 |\ + netgear,r7500v2 |\ + netgear,r7800) + echo $(macaddr_add $(mtd_get_mac_binary art 6) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress + ;; + tplink,c2600) + echo $(macaddr_add $(mtd_get_mac_binary default-mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress + ;; + tplink,vr2600v) + echo $(macaddr_add $(mtd_get_mac_binary default-mac 0) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress + ;; + zyxel,nbg6817) + echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress + ;; + *) + ;; +esac diff --git a/target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh b/target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh deleted file mode 100644 index c3ab1bc9b..000000000 --- a/target/linux/ipq806x/base-files/lib/upgrade/buffalo.sh +++ /dev/null @@ -1,139 +0,0 @@ -#!/bin/sh -# Copyright (C) 2018 OpenWrt.org -# - -. /lib/functions.sh - -# The mtd partition 'ubi' and 'rootfs_1' on NAND flash are os-image -# partitions. These partitions are called as "Bank1/Bank2" in U-Boot -# on WXR-2533DHP, and they are checked conditions when booting. -# Then, U-Boot checks kernel and rootfs volumes in ubi, but U-Boot -# needs "ubi_rootfs" as rootfs volume name. And, U-Boot checks the -# checksum at the end of rootfs (ubi_rootfs). -# When U-Boot writes os-image into the Bank, only kernel, rootfs -# (ubi_rootfs) and rootfs_data (ubi_rootfs_data) volumes are wrote -# into the Bank. (not full ubi image) -# -# == U-Boot Behaviors == -# - Bank1/Bank2 images are good, images are different -# -> writes os-image to Bank1 from Bank2 -# (this behavior is used to firmware upgrade in stock firmware) -# - Bank1 image is broken (or checksum error) -# -> writes os-image to Bank1 from Bank2 -# - Bank2 image is broken (or checksum error) -# -> writes os-image to Bank2 from Bank1 -# - Bank1/Bank2 images are broken (or checksum error) -# -> start tftp -CI_BUF_UBIPART="ubi" -CI_BUF_UBIPART2="rootfs_1" -KERN_VOLNAME="kernel" - -buffalo_upgrade_prepare_ubi() { - local rootfs_length="$1" - - # search first ubi partition - local mtdnum="$( find_mtd_index "$CI_BUF_UBIPART" )" - if [ ! "$mtdnum" ]; then - echo "cannot find first ubi mtd partition $CI_BUF_UBIPART" - return 1 - fi - - # search second ubi partition - local mtdnum2="$( find_mtd_index "$CI_BUF_UBIPART2" )" - if [ ! "$mtdnum2" ]; then - echo "cannot find second ubi mtd partition $CI_BUF_UBIPART2" - fi - - local ubidev="$( nand_find_ubi "$CI_BUF_UBIPART" )" - if [ ! "$ubidev" ]; then - ubiattach -m "$mtdnum" - sync - ubidev="$( nand_find_ubi "$CI_BUF_UBIPART" )" - fi - - local ubidev2="$( nand_find_ubi "$CI_BUF_UBIPART2" )" - if [ ! "$ubidev2" ] && [ -n "$mtdnum2" ]; then - ubiattach -m "$mtdnum2" - sync - ubidev2="$( nand_find_ubi "$CI_BUF_UBIPART2" )" - fi - - if [ ! "$ubidev" ]; then - ubiformat /dev/mtd$mtdnum -y - ubiattach -m "$mtdnum" - sync - ubidev="$( nand_find_ubi "$CI_BUF_UBIPART" )" - fi - - local kern_ubivol="$( nand_find_volume $ubidev $KERN_VOLNAME )" - local root_ubivol="$( nand_find_volume $ubidev ubi_rootfs )" - local data_ubivol="$( nand_find_volume $ubidev rootfs_data )" - # Buffalo volumes - local buf_data_ubivol="$( nand_find_volume $ubidev ubi_rootfs_data )" - local buf_kern2_ubivol="$( nand_find_volume $ubidev2 $KERN_VOLNAME )" - - # remove ubiblock device of rootfs - local root_ubiblk="ubiblock${root_ubivol:3}" - if [ "$root_ubivol" -a -e "/dev/$root_ubiblk" ]; then - echo "removing $root_ubiblk" - if ! ubiblock -r /dev/$root_ubivol; then - echo "cannot remove $root_ubiblk" - return 1; - fi - fi - - # kill volumes - [ "$kern_ubivol" ] && ubirmvol /dev/$ubidev -N $KERN_VOLNAME || true - [ "$root_ubivol" ] && ubirmvol /dev/$ubidev -N ubi_rootfs || true - [ "$data_ubivol" ] && ubirmvol /dev/$ubidev -N rootfs_data || true - [ "$buf_data_ubivol" ] && ubirmvol /dev/$ubidev -N ubi_rootfs_data || true - - if ! ubimkvol /dev/$ubidev -N $KERN_VOLNAME -s $kernel_length; then - echo "cannot create kernel volume" - return 1; - fi - - if ! ubimkvol /dev/$ubidev -N ubi_rootfs -s $rootfs_length; then - echo "cannot create rootfs volume" - return 1; - fi - - if ! ubimkvol /dev/$ubidev -N rootfs_data -m; then - echo "cannot initialize rootfs_data volume" - return 1 - fi - - # remove kernel volume from second ubi partition for U-Boot - # U-Boot writes os-image into Bank2 from Bank1 - [ "$buf_kern2_ubivol" ] && ubirmvol /dev/$ubidev2 -N $KERN_VOLNAME || true - - sync - return 0 -} - -buffalo_do_upgrade() { - local tar_file="$1" - local kernel_mtd="$(find_mtd_index $CI_BUF_UBIPART)" - - local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$') - board_dir=${board_dir%/} - - local kernel_length=`(tar xf $tar_file ${board_dir}/kernel -O | wc -c) 2> /dev/null` - local rootfs_length=`(tar xf $tar_file ${board_dir}/root -O | wc -c) 2> /dev/null` - - local rootfs_type="$(identify_tar "$tar_file" ${board_dir}/root)" - - buffalo_upgrade_prepare_ubi "$rootfs_length" || exit 1 - - local ubidev="$( nand_find_ubi "$CI_BUF_UBIPART" )" - local kern_ubivol="$(nand_find_volume $ubidev $KERN_VOLNAME)" - tar xf $tar_file ${board_dir}/kernel -O | \ - ubiupdatevol /dev/$kern_ubivol -s $kernel_length - - - local root_ubivol="$(nand_find_volume $ubidev ubi_rootfs)" - tar xf $tar_file ${board_dir}/root -O | \ - ubiupdatevol /dev/$root_ubivol -s $rootfs_length - - - CI_UBIPART="$CI_BUF_UBIPART" - nand_do_upgrade_success -} diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh index 1227fff6c..6e282f99f 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh @@ -10,16 +10,12 @@ platform_check_image() { platform_do_upgrade() { case "$(board_name)" in - buffalo,wxr-2533dhp) - buffalo_do_upgrade "$ARGV" - ;; compex,wpq864|\ netgear,d7800 |\ netgear,r7500 |\ netgear,r7500v2 |\ netgear,r7800 |\ qcom,ipq8064-ap148 |\ - qcom,ipq8064-ap161 |\ zyxel,nbg6817) nand_do_upgrade "$ARGV" ;; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts deleted file mode 100644 index 7e589be2c..000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts +++ /dev/null @@ -1,277 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - model = "Qualcomm IPQ8064/AP161"; - compatible = "qcom,ipq8064-ap161", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - mdio-gpio0 = &mdio0; - }; - - chosen { - linux,stdout-path = "serial0:115200n8"; - }; - - soc { - pinmux@800000 { - i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; - }; - }; - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - pullups { - pins = "gpio39"; - bias-pull-up; - }; - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio2", "gpio27", "gpio28", - "gpio29", "gpio30", "gpio31", - "gpio32", "gpio51", "gpio52", - "gpio59", "gpio60", "gpio61", - "gpio62" , "gpio66"; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - }; - - gsbi@16300000 { - qcom,mode = ; - status = "ok"; - serial@16340000 { - status = "ok"; - }; - - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ - }; - - gsbi5: gsbi@1a200000 { - qcom,mode = ; - status = "ok"; - - spi4: spi@1a280000 { - status = "ok"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: m25p80@0 { - compatible = "s25fl256s1"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "qcom,smem"; - }; - }; - }; - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - status = "ok"; - }; - - phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; - }; - - phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; - }; - - phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; - }; - - phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; - }; - - usb30@0 { - status = "ok"; - }; - - usb30@1 { - status = "ok"; - }; - - pcie0: pci@1b500000 { - status = "ok"; - }; - - pcie1: pci@1b700000 { - status = "ok"; - force_gen1 = <1>; - }; - - pcie2: pci@1b900000 { - status = "ok"; - }; - - nand@1ac00000 { - status = "ok"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - cs0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "qcom,smem"; - }; - }; - }; - - mdio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x20080 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; - - phy4: ethernet-phy@4 { - reg = <4>; - qca,phy-rgmii-en; - qca,txclk-delay-en; - qca,rxclk-delay-en; - }; - - phy3: ethernet-phy@3 { - device_type = "ethernet-phy"; - reg = <3>; - }; - }; - - gmac0: ethernet@37000000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac1: ethernet@37200000 { - status = "ok"; - phy-mode = "rgmii"; - qcom,id = <1>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - gmac2: ethernet@37400000 { - status = "ok"; - phy-mode = "sgmii"; - qcom,id = <2>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; -}; - -&adm_dma { - status = "ok"; -}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts index 881b54220..580e0f86b 100644 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts @@ -26,7 +26,7 @@ mdio-gpio0 = &mdio0; led-boot = &power_green; - led-failsafe = &power_red; + led-failsafe = &power_green; led-running = &power_green; led-upgrade = &power_green; }; @@ -36,6 +36,256 @@ }; soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio16", "gpio54", "gpio24", "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14", + "gpio15", "gpio55", "gpio56", "gpio57", "gpio58", + "gpio64", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + bias-pull-down; + }; + + data { + pins = "gpio18", "gpio19"; + drive-strength = <10>; + }; + + cs { + pins = "gpio20"; + drive-strength = <10>; + bias-pull-up; + }; + + clk { + pins = "gpio21"; + drive-strength = <12>; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + + usb_pwr_en_pins: usb_pwr_en_pins { + mux { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-high; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash: m25p80@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0 0x20000>; + read-only; + }; + + MIBIB@20000 { + label = "MIBIB"; + reg = <0x20000 0x20000>; + read-only; + }; + + SBL2@40000 { + label = "SBL2"; + reg = <0x40000 0x40000>; + read-only; + }; + + SBL3@80000 { + label = "SBL3"; + reg = <0x80000 0x80000>; + read-only; + }; + + DDRCONFIG@100000 { + label = "DDRCONFIG"; + reg = <0x100000 0x10000>; + read-only; + }; + + SSD@110000 { + label = "SSD"; + reg = <0x110000 0x10000>; + read-only; + }; + + TZ@120000 { + label = "TZ"; + reg = <0x120000 0x80000>; + read-only; + }; + + RPM@1a0000 { + label = "RPM"; + reg = <0x1a0000 0x80000>; + read-only; + }; + + APPSBL@220000 { + label = "APPSBL"; + reg = <0x220000 0x80000>; + read-only; + }; + + APPSBLENV@2a0000 { + label = "APPSBLENV"; + reg = <0x2a0000 0x10000>; + }; + + PRODUCTDATA: PRODUCTDATA@2b0000 { + label = "PRODUCTDATA"; + reg = <0x2b0000 0x30000>; + read-only; + }; + + ART@2e0000 { + label = "ART"; + reg = <0x2e0000 0x40000>; + read-only; + }; + + TP@320000 { + label = "TP"; + reg = <0x320000 0x40000>; + read-only; + }; + + TINY@360000 { + label = "TINY"; + reg = <0x360000 0x500000>; + read-only; + }; + + firmware@860000 { + label = "firmware"; + reg = <0x860000 0x17a0000>; + }; + }; + }; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + + pinctrl-0 = <&usb_pwr_en_pins>; + pinctrl-names = "default"; + }; + + usb30@1 { + status = "ok"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + force_gen1 = <1>; + }; + mdio0: mdio { compatible = "virtual,mdio-gpio"; #address-cells = <1>; @@ -44,22 +294,52 @@ pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; - ethernet-phy@0 { + phy0: ethernet-phy@0 { reg = <0>; qca,ar8327-initvals = < - 0x00004 0x06000000 /* PAD0_MODE */ - 0x0000c 0x00080080 /* PAD6_MODE */ - 0x000e4 0x0006a545 /* MAC_POWER_SEL */ + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x0000004e /* PORT0_STATUS */ - 0x00094 0x0000004e /* PORT6_STATUS */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ >; }; - ethernet-phy@4 { + phy4: ethernet-phy@4 { reg = <4>; }; }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&PRODUCTDATA 6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&PRODUCTDATA 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; gpio-keys { @@ -104,7 +384,7 @@ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; }; - power_red: power_red { + power_red { label = "wg2600hp:red:power"; gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; }; @@ -162,281 +442,5 @@ }; &adm_dma { - status = "okay"; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mtd-mac-address = <&PRODUCTDATA 6>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - mtd-mac-address = <&PRODUCTDATA 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi4_serial { - status = "okay"; -}; - -&gsbi5 { - status = "okay"; - - qcom,mode = ; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - MIBIB@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - SBL2@40000 { - label = "SBL2"; - reg = <0x40000 0x40000>; - read-only; - }; - - SBL3@80000 { - label = "SBL3"; - reg = <0x80000 0x80000>; - read-only; - }; - - DDRCONFIG@100000 { - label = "DDRCONFIG"; - reg = <0x100000 0x10000>; - read-only; - }; - - SSD@110000 { - label = "SSD"; - reg = <0x110000 0x10000>; - read-only; - }; - - TZ@120000 { - label = "TZ"; - reg = <0x120000 0x80000>; - read-only; - }; - - RPM@1a0000 { - label = "RPM"; - reg = <0x1a0000 0x80000>; - read-only; - }; - - APPSBL@220000 { - label = "APPSBL"; - reg = <0x220000 0x80000>; - read-only; - }; - - APPSBLENV@2a0000 { - label = "APPSBLENV"; - reg = <0x2a0000 0x10000>; - }; - - PRODUCTDATA: PRODUCTDATA@2b0000 { - label = "PRODUCTDATA"; - reg = <0x2b0000 0x30000>; - read-only; - }; - - ART@2e0000 { - label = "ART"; - reg = <0x2e0000 0x40000>; - read-only; - }; - - TP@320000 { - label = "TP"; - reg = <0x320000 0x40000>; - read-only; - }; - - TINY@360000 { - label = "TINY"; - reg = <0x360000 0x500000>; - read-only; - }; - - firmware@860000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x860000 0x17a0000>; - }; - }; - }; - }; -}; - -&hs_phy_0 { /* USB3 port 0 HS phy */ - status = "okay"; -}; - -&ss_phy_0 { /* USB3 port 0 SS phy */ - status = "okay"; -}; - -&hs_phy_1 { /* USB3 port 1 HS phy */ - status = "okay"; -}; - -&ss_phy_1 { /* USB3 port 1 SS phy */ - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - force_gen1 = <1>; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio16", "gpio54", "gpio24", "gpio25"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c4_pins: i2c4_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14", - "gpio15", "gpio55", "gpio56", "gpio57", "gpio58", - "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - - usb_pwr_en_pins: usb_pwr_en_pins { - mux { - pins = "gpio22"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - output-high; - }; - }; + status = "ok"; }; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts deleted file mode 100644 index 7b5ee799e..000000000 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts +++ /dev/null @@ -1,535 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "qcom-ipq8064-v2.0.dtsi" - -#include - -/ { - model = "Buffalo WXR-2533DHP"; - compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064"; - - memory@42000000 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - serial0 = &gsbi4_serial; - - led-boot = &power; - led-failsafe = &diag; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - /* use "ubi_rootfs" volume in "ubi" partition as rootfs */ - bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs"; - stdout-path = "serial0:115200n8"; - }; - - soc { - nand@1ac00000 { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - cs@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - ubi@0 { - label = "ubi"; - reg = <0x0000000 0x4000000>; - }; - - rootfs_1@4000000 { - label = "rootfs_1"; - reg = <0x4000000 0x4000000>; - }; - }; - }; - }; - - mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, - <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x07600000 /* PAD0_MODE */ - 0x00008 0x01000000 /* PAD5_MODE */ - 0x0000c 0x00000080 /* PAD6_MODE */ - 0x00050 0xcc35cc35 /* LED_CTRL0 */ - 0x00054 0xca35ca35 /* LED_CTRL1 */ - 0x00058 0xc935c935 /* LED_CTRL2 */ - 0x0005c 0x03ffff00 /* LED_CTRL3 */ - 0x000e4 0x0006a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x0000007e /* PORT0_STATUS */ - 0x00094 0x0000007e /* PORT6_STATUS */ - >; - }; - - ethernet-phy@4 { - reg = <4>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb { - label = "wxr-2533dhp:green:usb"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port0 &hub_port1>; - }; - - guestport { - label = "wxr-2533dhp:green:guestport"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - diag: diag { - label = "wxr-2533dhp:orange:diag"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - internet_orange { - label = "wxr-2533dhp:orange:internet"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - internet_white { - label = "wxr-2533dhp:white:internet"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wireless_orange { - label = "wxr-2533dhp:orange:wireless"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wireless_white { - label = "wxr-2533dhp:white:wireless"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - router_orange { - label = "wxr-2533dhp:orange:router"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; - }; - - router_white { - label = "wxr-2533dhp:white:router"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - power: power { - label = "wxr-2533dhp:white:power"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - power { - label = "power"; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - eject { - label = "eject"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - guest { - label = "guest"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ap { - label = "ap"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - router { - label = "router"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - - auto { - label = "auto"; - gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mtd-mac-address = <&ART 6>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "ok"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - mtd-mac-address = <&ART 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi4_serial { - status = "okay"; - - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&gsbi5 { - status = "okay"; - qcom,mode = ; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x10000>; - read-only; - }; - - MIBIB@10000 { - label = "MIBIB"; - reg = <0x10000 0x20000>; - read-only; - }; - - SBL2@30000 { - label = "SBL2"; - reg = <0x30000 0x30000>; - read-only; - }; - - SBL3@60000 { - label = "SBL3"; - reg = <0x60000 0x30000>; - read-only; - }; - - DDRCONFIG@90000 { - label = "DDRCONFIG"; - reg = <0x90000 0x10000>; - read-only; - }; - - SSD@a0000 { - label = "SSD"; - reg = <0xa0000 0x10000>; - read-only; - }; - - TZ@b0000 { - label = "TZ"; - reg = <0xb0000 0x30000>; - read-only; - }; - - RPM@e0000 { - label = "RPM"; - reg = <0xe0000 0x20000>; - read-only; - }; - - APPSBL@100000 { - label = "APPSBL"; - reg = <0x100000 0x70000>; - read-only; - }; - - APPSBLENV@170000 { - label = "APPSBLENV"; - reg = <0x170000 0x10000>; - read-only; - }; - - ART: ART@180000 { - label = "ART"; - reg = <0x180000 0x40000>; - read-only; - }; - - BOOTCONFIG@1c0000 { - label = "BOOTCONFIG"; - reg = <0x1c0000 0x10000>; - read-only; - }; - - APPSBL_1@1d0000 { - label = "APPSBL_1"; - reg = <0x1d0000 0x70000>; - read-only; - }; - }; - }; - }; -}; - -&hs_phy_0 { /* USB3 port 0 HS phy */ - status = "okay"; -}; - -&ss_phy_0 { /* USB3 port 0 SS phy */ - status = "okay"; -}; - -&hs_phy_1 { /* USB3 port 1 HS phy */ - status = "okay"; -}; - -&ss_phy_1 { /* USB3 port 1 SS phy */ - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&usb3_1 { - status = "okay"; -}; - -&dwc3_0 { - #address-cells = <1>; - #size-cells = <0>; - - hub_port0: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&dwc3_1 { - #address-cells = <1>; - #size-cells = <0>; - - hub_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - force_gen1 = <1>; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57", - "gpio58", "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22", - "gpio23", "gpio24", "gpio25", "gpio26", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - uart0_pins: uart0_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs{ - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - mdio0_pins: mdio0_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - mux { - pins = "gpio34", "gpio35", "gpio36", - "gpio37", "gpio38", "gpio39", - "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - function = "nand"; - drive-strength = <10>; - bias-disable; - }; - - pullups { - pins = "gpio39"; - bias-pull-up; - }; - - hold { - pins = "gpio40", "gpio41", "gpio42", - "gpio43", "gpio44", "gpio45", - "gpio46", "gpio47"; - bias-bus-hold; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - }; - - usb_pwr_en_pins: usb_pwr_en_pins { - mux{ - pins = "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - output-high; - }; - }; -}; \ No newline at end of file diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi index 08b8e003a..d38fc29b6 100644 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -972,7 +972,7 @@ status = "disabled"; - dwc3_0: dwc3@11000000 { + dwc3@11000000 { compatible = "snps,dwc3"; reg = <0x11000000 0xcd00>; interrupts = <0 110 0x4>; @@ -997,7 +997,7 @@ status = "disabled"; - dwc3_1: dwc3@10000000 { + dwc3@10000000 { compatible = "snps,dwc3"; reg = <0x10000000 0xcd00>; interrupts = <0 205 0x4>; diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index e1eb090de..a7f740ff6 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -3,13 +3,6 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk -define Build/buffalo-rootfs-cksum - ( \ - echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \ - $(STAGING_DIR_HOST)/bin/awk '{s+=$$0}END{printf "%x", 255-s%256}')"; \ - ) >> $@ -endef - define Device/Default PROFILES := Default KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts) @@ -74,26 +67,13 @@ define Device/ZyXELImage KERNEL_SUFFIX := -uImage KERNEL = kernel-bin | append-dtb | uImage none | pad-to $${KERNEL_SIZE} KERNEL_NAME := zImage - IMAGES := factory.bin sysupgrade.bin + IMAGES := factory.bin sysupgrade.bin mmcblk0p5-rootfs.bin mmcblk0p4-kernel.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | zyxel-ras-image separate-kernel IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata + IMAGE/mmcblk0p5-rootfs.bin := append-rootfs | pad-rootfs | pad-to $$$${BLOCKSIZE} + IMAGE/mmcblk0p4-kernel.bin := append-kernel endef -define Device/buffalo_wxr-2533dhp - $(call Device/LegacyImage) - DEVICE_DTS := qcom-ipq8064-wxr-2533dhp - DEVICE_TITLE := Buffalo WXR-2533DHP - BLOCKSIZE := 128k - PAGESIZE := 2048 - IMAGE_SIZE := 65536k - KERNEL_IN_UBI := 1 - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin := append-rootfs | buffalo-rootfs-cksum | \ - sysupgrade-tar rootfs=$$$$@ | append-metadata - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct -endef -TARGET_DEVICES += buffalo_wxr-2533dhp - define Device/compex_wpq864 $(call Device/FitImage) $(call Device/UbiFit) @@ -118,7 +98,7 @@ define Device/linksys_ea8500 IMAGES := factory.bin sysupgrade.bin IMAGE/factory.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-ubi DEVICE_TITLE := Linksys EA8500 - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct + DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef TARGET_DEVICES += linksys_ea8500 @@ -130,7 +110,7 @@ define Device/nec_wg2600hp DEVICE_TITLE := NEC Aterm WG2600HP IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct + DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef TARGET_DEVICES += nec_wg2600hp @@ -145,7 +125,7 @@ define Device/netgear_d7800 BOARD_NAME := d7800 SUPPORTED_DEVICES += d7800 DEVICE_TITLE := Netgear Nighthawk X4 D7800 - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct + DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef TARGET_DEVICES += netgear_d7800 @@ -160,7 +140,7 @@ define Device/netgear_r7500 BOARD_NAME := r7500 SUPPORTED_DEVICES += r7500 DEVICE_TITLE := Netgear Nighthawk X4 R7500 - DEVICE_PACKAGES := ath10k-firmware-qca988x-ct + DEVICE_PACKAGES := ath10k-firmware-qca988x endef TARGET_DEVICES += netgear_r7500 @@ -175,7 +155,7 @@ define Device/netgear_r7500v2 BOARD_NAME := r7500v2 SUPPORTED_DEVICES += r7500v2 DEVICE_TITLE := Netgear Nighthawk X4 R7500v2 - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ath10k-firmware-qca988x-ct + DEVICE_PACKAGES := ath10k-firmware-qca99x0 ath10k-firmware-qca988x endef TARGET_DEVICES += netgear_r7500v2 @@ -190,7 +170,7 @@ define Device/netgear_r7800 BOARD_NAME := r7800 SUPPORTED_DEVICES += r7800 DEVICE_TITLE := Netgear Nighthawk X4S R7800 - DEVICE_PACKAGES := ath10k-firmware-qca9984-ct + DEVICE_PACKAGES := ath10k-firmware-qca9984 endef TARGET_DEVICES += netgear_r7800 @@ -204,7 +184,7 @@ define Device/qcom_ipq8064-ap148 BOARD_NAME := ap148 SUPPORTED_DEVICES += ap148 DEVICE_TITLE := Qualcomm AP148 - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct + DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef TARGET_DEVICES += qcom_ipq8064-ap148 @@ -217,30 +197,17 @@ define Device/qcom_ipq8064-ap148-legacy BOARD_NAME := ap148 SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148 DEVICE_TITLE := Qualcomm AP148 (legacy) - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct + DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef TARGET_DEVICES += qcom_ipq8064-ap148-legacy -define Device/qcom_ipq8064-ap161 - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_DTS := qcom-ipq8064-ap161 - KERNEL_INSTALL := 1 - BLOCKSIZE := 128k - PAGESIZE := 2048 - BOARD_NAME := ap161 - DEVICE_TITLE := Qualcomm AP161 - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct -endef -TARGET_DEVICES += qcom_ipq8064-ap161 - define Device/qcom_ipq8064-db149 $(call Device/FitImage) DEVICE_DTS := qcom-ipq8064-db149 KERNEL_INSTALL := 1 BOARD_NAME := db149 DEVICE_TITLE := Qualcomm DB149 - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct + DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef TARGET_DEVICES += qcom_ipq8064-db149 @@ -253,7 +220,7 @@ define Device/tplink_c2600 SUPPORTED_DEVICES += c2600 TPLINK_BOARD_ID := C2600 DEVICE_TITLE := TP-Link Archer C2600 - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct + DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef TARGET_DEVICES += tplink_c2600 @@ -268,7 +235,7 @@ define Device/tplink_vr2600v BOARD_NAME := vr2600v SUPPORTED_DEVICES += vr2600v DEVICE_TITLE := TP-Link Archer VR2600v - DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct + DEVICE_PACKAGES := ath10k-firmware-qca99x0 IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata endef @@ -284,7 +251,7 @@ define Device/zyxel_nbg6817 RAS_VERSION := "V1.99(OWRT.9999)C0" SUPPORTED_DEVICES += nbg6817 DEVICE_TITLE := ZyXEL NBG6817 - DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup + DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup $(call Device/ZyXELImage) endef TARGET_DEVICES += zyxel_nbg6817 diff --git a/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch index e11378b42..b94e4828c 100644 --- a/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch @@ -10,20 +10,18 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -699,6 +699,18 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -699,6 +699,16 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8084-mtp.dtb \ qcom-ipq4019-ap.dk01.1-c1.dtb \ qcom-ipq8064-ap148.dtb \ + qcom-ipq8064-c2600.dtb \ + qcom-ipq8064-d7800.dtb \ + qcom-ipq8064-db149.dtb \ -+ qcom-ipq8064-ap161.dtb \ + qcom-ipq8064-ea8500.dtb \ + qcom-ipq8064-r7500.dtb \ + qcom-ipq8064-r7500v2.dtb \ + qcom-ipq8064-wg2600hp.dtb \ + qcom-ipq8064-wpq864.dtb \ -+ qcom-ipq8064-wxr-2533dhp.dtb \ + qcom-ipq8065-nbg6817.dtb \ + qcom-ipq8065-r7800.dtb \ qcom-msm8660-surf.dtb \