From b7d4936042a8d8b0fe2de7a13259d9199315e0da Mon Sep 17 00:00:00 2001
From: libinanshu <44538423+libinanshu@users.noreply.github.com>
Date: Thu, 8 Jul 2021 10:55:13 +0800
Subject: [PATCH] add Pisen_WPR003N (#7307)

* Update arpbind.po

* Update sfe.po

* Update flowoffload.po

* add Pisen_WPR003N
---
 .../linux/ath79/dts/ar9341_pisen_wpr003n.dts  | 106 ++++++++++++++++++
 .../generic/base-files/etc/board.d/01_leds    |   3 +
 .../generic/base-files/etc/board.d/02_network |   5 +
 target/linux/ath79/image/generic.mk           |  10 ++
 4 files changed, 124 insertions(+)
 create mode 100644 target/linux/ath79/dts/ar9341_pisen_wpr003n.dts

diff --git a/target/linux/ath79/dts/ar9341_pisen_wpr003n.dts b/target/linux/ath79/dts/ar9341_pisen_wpr003n.dts
new file mode 100644
index 000000000..5473c5408
--- /dev/null
+++ b/target/linux/ath79/dts/ar9341_pisen_wpr003n.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9341.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "PISEN WPR003N";
+	compatible = "pisen,wpr003n", "qca,ar9341";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+		label-mac-device = &wmac;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "blue:power";
+			gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uboot: partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x020000>;
+				read-only;
+			};
+
+			partition@20000 {
+				compatible = "tplink,firmware";
+				label = "firmware";
+				reg = <0x020000 0xfd0000>;
+			};
+
+			art: partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x010000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy4>;
+
+	mtd-mac-address = <&uboot 0x1fc00>;
+	mtd-mac-address-increment = <(-1)>;
+};
+
+&eth1 {
+	mtd-mac-address = <&uboot 0x1fc00>;
+
+	gmac-config {
+		device = <&gmac>;
+		switch-phy-only_mode = <0>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+	mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 5d67d1468..8d169285a 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -22,6 +22,9 @@ tplink,cpe610-v1|\
 tplink,cpe610-v2)
 	ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0"
 	;;
+pisen,wpr003n)
+	ucidef_set_led_netdev "wan" "WAN" "blue:power" "eth1" "tx rx"
+	;;
 alfa-network,n2q)
 	ucidef_set_led_netdev "lan2" "LAN2" "orange:lan2" "eth1"
 	ucidef_set_led_switch "lan1" "LAN1" "orange:lan1" "switch0" "0x10"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 833a1d42b..2afdc3d88 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -404,6 +404,11 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
 		;;
+	pisen,wpr003n)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan"
+		;;
 	tplink,tl-wr1043nd-v1)
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 3c80707b7..674e6e6b7 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1902,6 +1902,16 @@ define Device/pisen_wmm003n
 endef
 TARGET_DEVICES += pisen_wmm003n
 
+define Device/pisen_wpr003n
+  $(Device/tplink-16mlzma)
+  SOC := ar9341
+  DEVICE_VENDOR := PISEN
+  DEVICE_MODEL := WPR003N
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+  TPLINK_HWID := 0x08410008
+endef
+TARGET_DEVICES += pisen_wpr003n
+
 define Device/plasmacloud_pa300-common
   SOC := qca9533
   DEVICE_VENDOR := Plasma Cloud