298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-16 04:13:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

filogic: add support for GL.iNet GL-MT6000 support

Browse Source
This commit is contained in:
lean 2023-09-08 16:33:49 +08:00
parent 191a5b1ba4
commit 77abd0b975
6 changed files with 461 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
target/linux/generic/pending-5.15/731-net-phy-realtek-support-interrupt-of-RTL8221B.patch Normal file
View File

@ -0,0 +1,63 @@
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -971,6 +971,51 @@ static int rtl8221b_config_init(struct p
return 0;
}
+static int rtl8221b_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read_mmd(phydev, RTL8221B_MMD_PHY_CTRL, 0xa4d4);
+
+ return (err < 0) ? err : 0;
+}
+
+static int rtl8221b_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ err = rtl8221b_ack_interrupt(phydev);
+ if (err)
+ return err;
+
+ err = phy_write_mmd(phydev, RTL8221B_MMD_PHY_CTRL, 0xa4d2, 0x7ff);
+ } else {
+ err = phy_write_mmd(phydev, RTL8221B_MMD_PHY_CTRL, 0xa4d2, 0x0);
+ if (err)
+ return err;
+
+ err = rtl8221b_ack_interrupt(phydev);
+ }
+
+ return err;
+}
+
+static irqreturn_t rtl8221b_handle_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = rtl8221b_ack_interrupt(phydev);
+ if (err) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static struct phy_driver realtek_drvs[] = {
{
PHY_ID_MATCH_EXACT(0x00008201),
@@ -1119,6 +1164,8 @@ static struct phy_driver realtek_drvs[]
.get_features = rtl822x_get_features,
.config_init = rtl8221b_config_init,
.config_aneg = rtl822x_config_aneg,
+ .config_intr = rtl8221b_config_intr,
+ .handle_interrupt = rtl8221b_handle_interrupt,
.probe = rtl822x_probe,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,

63
target/linux/generic/pending-6.1/741-net-phy-realtek-support-interrupt-of-RTL8221B.patch Normal file
View File

@ -0,0 +1,63 @@
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -979,6 +979,51 @@ static int rtl8221b_config_init(struct p
return 0;
}
+static int rtl8221b_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_read_mmd(phydev, RTL8221B_MMD_PHY_CTRL, 0xa4d4);
+
+ return (err < 0) ? err : 0;
+}
+
+static int rtl8221b_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ err = rtl8221b_ack_interrupt(phydev);
+ if (err)
+ return err;
+
+ err = phy_write_mmd(phydev, RTL8221B_MMD_PHY_CTRL, 0xa4d2, 0x7ff);
+ } else {
+ err = phy_write_mmd(phydev, RTL8221B_MMD_PHY_CTRL, 0xa4d2, 0x0);
+ if (err)
+ return err;
+
+ err = rtl8221b_ack_interrupt(phydev);
+ }
+
+ return err;
+}
+
+static irqreturn_t rtl8221b_handle_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ err = rtl8221b_ack_interrupt(phydev);
+ if (err) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static struct phy_driver realtek_drvs[] = {
{
PHY_ID_MATCH_EXACT(0x00008201),
@@ -1139,6 +1184,8 @@ static struct phy_driver realtek_drvs[]
.get_features = rtl822x_get_features,
.config_init = rtl8221b_config_init,
.config_aneg = rtl822x_config_aneg,
+ .config_intr = rtl8221b_config_intr,
+ .handle_interrupt = rtl8221b_handle_interrupt,
.probe = rtl822x_probe,
.read_status = rtl822x_read_status,
.suspend = genphy_suspend,

306
target/linux/mediatek/dts/mt7986a-glinet-gl-mt6000.dts Normal file
View File

@ -0,0 +1,306 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/mt65xx.h>
#include "mt7986a.dtsi"
/ {
model = "GL.iNet GL-MT6000";
compatible = "glinet,gl-mt6000", "mediatek,mt7986a";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
bootargs-append = " root=PARTLABEL=rootfs rootwait";
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1.8vd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_run: led@0 {
label = "blue:run";
gpios = <&pio 38 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led@1 {
label = "white:system";
gpios = <&pio 37 GPIO_ACTIVE_LOW>;
};
};
usb_vbus: regulator-usb-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "2500base-x";
phy-handle = <&phy1>;
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
phy1: phy@1 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <1>;
reset-assert-us = <100000>;
reset-deassert-us = <100000>;
reset-gpios = <&pio 10 GPIO_ACTIVE_LOW>;
interrupt-parent = <&pio>;
interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
realtek,aldps-enable;
};
phy7: ethernet-phy@7 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <7>;
reset-assert-us = <100000>;
reset-deassert-us = <100000>;
reset-gpios = <&pio 19 GPIO_ACTIVE_LOW>;
interrupt-parent = <&pio>;
interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
realtek,aldps-enable;
};
switch: switch@31 {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan0";
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@5 {
reg = <5>;
label = "lan4";
phy-handle = <&phy7>;
phy-mode = "2500base-x";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
};
};
&pio {
wf_2g_5g_pins: wf_2g_5g-pins {
mux {
function = "wifi";
groups = "wf_2g", "wf_5g";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
mmc0_pins_default: mmc0-pins {
mux {
function = "emmc";
groups = "emmc_51";
};
conf-cmd-dat {
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
input-enable;
drive-strength = <4>;
mediatek,pull-up-adv = <1>; /* pull-up 10K */
};
conf-clk {
pins = "EMMC_CK";
drive-strength = <6>;
mediatek,pull-down-adv = <2>; /* pull-down 50K */
};
conf-ds {
pins = "EMMC_DSL";
mediatek,pull-down-adv = <2>; /* pull-down 50K */
};
conf-rst {
pins = "EMMC_RSTB";
drive-strength = <4>;
mediatek,pull-up-adv = <1>; /* pull-up 10K */
};
};
mmc0_pins_uhs: mmc0-uhs-pins {
mux {
function = "emmc";
groups = "emmc_51";
};
conf-cmd-dat {
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
input-enable;
drive-strength = <4>;
mediatek,pull-up-adv = <1>; /* pull-up 10K */
};
conf-clk {
pins = "EMMC_CK";
drive-strength = <6>;
mediatek,pull-down-adv = <2>; /* pull-down 50K */
};
conf-ds {
pins = "EMMC_DSL";
mediatek,pull-down-adv = <2>; /* pull-down 50K */
};
conf-rst {
pins = "EMMC_RSTB";
drive-strength = <4>;
mediatek,pull-up-adv = <1>; /* pull-up 10K */
};
};
};
&crypto {
status = "okay";
};
&ssusb {
vusb33-supply = <&reg_3p3v>;
vbus-supply = <&usb_vbus>;
status = "okay";
};
&trng {
status = "okay";
};
&uart0 {
status = "okay";
};
&usb_phy {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
pinctrl-names = "default";
pinctrl-0 = <&wf_2g_5g_pins>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
bus-width = <8>;
max-frequency = <200000000>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
hs400-ds-delay = <0x14014>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
non-removable;
no-sd;
no-sdio;
status = "okay";
};

8
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
View File

@ -17,6 +17,9 @@ mediatek_setup_interfaces()
glinet,gl-mt3000)
ucidef_set_interfaces_lan_wan eth1 eth0
;;
glinet,gl-mt6000)
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 lan4" eth1
;;
h3c,magic-nx30-pro)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
;;
@ -63,6 +66,11 @@ mediatek_setup_macs()
bananapi,bpi-r3)
wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1)
;;
glinet,gl-mt6000)
label_mac=$(mmc_get_mac_binary factory 0x0a)
wan_mac=$label_mac
lan_mac=$(macaddr_add "$label_mac" 2)
;;
h3c,magic-nx30-pro)
wan_mac=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
lan_mac=$(macaddr_add "$wan_mac" 1)

7
target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata
View File

@ -15,6 +15,13 @@ case "$FIRMWARE" in
;;
esac
;;
"mediatek/mt7986_eeprom_mt7976_dual.bin")
case "$board" in
glinet,gl-mt6000)
caldata_extract_mmc "factory" 0x0 0x1000
;;
esac
;;
*)
exit 1
;;

14
target/linux/mediatek/image/filogic.mk
View File

@ -136,6 +136,20 @@ define Device/glinet_gl-mt3000
endef
TARGET_DEVICES += glinet_gl-mt3000
define Device/glinet_gl-mt6000
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT6000
DEVICE_DTS := mt7986a-glinet-gl-mt6000
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb2 kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot glinet_gl-mt6000
endef
TARGET_DEVICES += glinet_gl-mt6000
define Device/h3c_magic-nx30-pro
DEVICE_VENDOR := H3C
DEVICE_MODEL := Magic NX30 Pro