diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile index b3b431931..0e32a2b34 100644 --- a/package/kernel/mac80211/Makefile +++ b/package/kernel/mac80211/Makefile @@ -24,60 +24,23 @@ PKG_MAINTAINER:=Felix Fietkau PKG_DRIVERS = \ adm8211 \ airo \ - ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k \ - b43 b43legacy \ - carl9170 \ hermes hermes-pci hermes-pcmcia hermes-plx\ - iwl-legacy iwl3945 iwl4965 iwlwifi \ lib80211 \ - libipw ipw2100 ipw2200 \ - libertas-sdio libertas-usb libertas-spi \ mac80211-hwsim \ mt7601u \ - mwl8k mwifiex-pcie mwifiex-sdio \ p54-common p54-pci p54-spi p54-usb \ rsi91x rsi91x-usb rsi91x-sdio\ - rt2x00-lib rt2x00-pci rt2x00-usb \ - rt2400-pci rt2500-pci rt2500-usb \ - rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \ - rt61-pci rt73-usb \ - rtl8180 rtl8187 \ - rtlwifi rtlwifi-pci rtlwifi-btcoexist rtlwifi-usb rtl8192c-common \ - rtl8192ce rtl8192se rtl8192de rtl8192cu rtl8821ae \ - rtl8xxxu \ wlcore wl12xx wl18xx \ zd1211rw PKG_CONFIG_DEPENDS:= \ CONFIG_PACKAGE_kmod-mac80211 \ - $(patsubst %,CONFIG_PACKAGE_kmod-%,$(PKG_DRIVERS)) \ CONFIG_PACKAGE_MAC80211_DEBUGFS \ CONFIG_PACKAGE_MAC80211_MESH \ CONFIG_PACKAGE_MAC80211_TRACING \ - CONFIG_PACKAGE_ATH_DEBUG \ - CONFIG_PACKAGE_ATH_DFS \ - CONFIG_PACKAGE_ATH_SPECTRAL \ - CONFIG_PACKAGE_ATH_DYNACK \ - CONFIG_PACKAGE_B43_DEBUG \ - CONFIG_PACKAGE_B43_PIO \ - CONFIG_PACKAGE_B43_PHY_G \ - CONFIG_PACKAGE_B43_PHY_N \ - CONFIG_PACKAGE_B43_PHY_LP \ - CONFIG_PACKAGE_B43_PHY_HT \ - CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB \ - CONFIG_PACKAGE_B43_BUSES_BCMA \ - CONFIG_PACKAGE_B43_BUSES_SSB \ - CONFIG_PACKAGE_BRCM80211_DEBUG \ CONFIG_PACKAGE_IWLWIFI_DEBUG \ CONFIG_PACKAGE_IWLWIFI_DEBUGFS \ - CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS \ - CONFIG_PACKAGE_RT2X00_DEBUG \ CONFIG_PACKAGE_RTLWIFI_DEBUG \ - CONFIG_ATH9K_SUPPORT_PCOEM \ - CONFIG_ATH9K_TX99 \ - CONFIG_ATH10K_LEDS \ - CONFIG_ATH10K_THERMAL \ - CONFIG_ATH_USER_REGD \ include $(INCLUDE_DIR)/package.mk @@ -89,6 +52,48 @@ define KernelPackage/mac80211/Default MAINTAINER:=Felix Fietkau endef +config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m) + +config-y:= \ + WLAN \ + NL80211_TESTMODE \ + CFG80211_WEXT \ + CFG80211_CERTIFICATION_ONUS \ + MAC80211_RC_MINSTREL \ + MAC80211_RC_MINSTREL_HT \ + MAC80211_RC_MINSTREL_VHT \ + MAC80211_RC_DEFAULT_MINSTREL \ + WLAN_VENDOR_ADMTEK \ + WLAN_VENDOR_ATH \ + WLAN_VENDOR_ATMEL \ + WLAN_VENDOR_BROADCOM \ + WLAN_VENDOR_CISCO \ + WLAN_VENDOR_INTEL \ + WLAN_VENDOR_INTERSIL \ + WLAN_VENDOR_MARVELL \ + WLAN_VENDOR_MEDIATEK \ + WLAN_VENDOR_RALINK \ + WLAN_VENDOR_REALTEK \ + WLAN_VENDOR_RSI \ + WLAN_VENDOR_ST \ + WLAN_VENDOR_TI \ + WLAN_VENDOR_ZYDAS \ + +config-$(call config_package,cfg80211) += CFG80211 + +config-$(call config_package,mac80211) += MAC80211 +config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH + +include ath.mk +include broadcom.mk +include intel.mk +include marvell.mk +include ralink.mk +include realtek.mk + +PKG_CONFIG_DEPENDS += \ + $(patsubst %,CONFIG_PACKAGE_kmod-%,$(PKG_DRIVERS)) + define KernelPackage/cfg80211 $(call KernelPackage/mac80211/Default) TITLE:=cfg80211 - wireless configuration API @@ -164,659 +169,6 @@ define KernelPackage/airo/description Kernel support for Cisco Aironet cards endef -define KernelPackage/ath/config - if PACKAGE_kmod-ath - config ATH_USER_REGD - bool "Force Atheros drivers to respect the user's regdomain settings" - default y - help - Atheros' idea of regulatory handling is that the EEPROM of the card defines - the regulatory limits and the user is only allowed to restrict the settings - even further, even if the country allows frequencies or power levels that - are forbidden by the EEPROM settings. - - Select this option if you want the driver to respect the user's decision about - regulatory settings. - - config PACKAGE_ATH_DEBUG - bool "Atheros wireless debugging" - help - Say Y, if you want to debug atheros wireless drivers. - Only ath9k & ath10k make use of this. - - config PACKAGE_ATH_DFS - bool "Enable DFS support" - default y - help - Dynamic frequency selection (DFS) is required for most of the 5 GHz band - channels in Europe, US, and Japan. - - Select this option if you want to use such channels. - - config PACKAGE_ATH_SPECTRAL - bool "Atheros spectral scan support" - depends on PACKAGE_ATH_DEBUG - select KERNEL_RELAY - help - Say Y to enable access to the FFT/spectral data via debugfs. - - config PACKAGE_ATH_DYNACK - bool "Enable Dynack support" - depends on PACKAGE_kmod-ath9k-common - help - Enables support for Dynamic ACK estimation, which allows the fastest possible speed - at any distance automatically by increasing/decreasing the max frame ACK time for - the most remote station detected. It can be enabled by using iw (iw phy0 set distance auto), - or by sending the NL80211_ATTR_WIPHY_DYN_ACK flag to mac80211 driver using netlink. - - Select this option if you want to enable this feature - - endif -endef - -define KernelPackage/ath - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros common driver part - DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath79||TARGET_ath25 +kmod-mac80211 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko - MENU:=1 -endef - -define KernelPackage/ath/description - This module contains some common parts needed by Atheros Wireless drivers. -endef - -define KernelPackage/ath5k - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 5xxx wireless cards support - URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k - DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath +@DRIVER_11W_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko - AUTOLOAD:=$(call AutoProbe,ath5k) -endef - -define KernelPackage/ath5k/description - This module adds support for wireless adapters based on - Atheros 5xxx chipset. -endef - -define KernelPackage/ath6kl - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros FullMAC wireless devices (common code for ath6kl_sdio and ath6kl_usb) - URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl - HIDDEN:=1 - DEPENDS+= +kmod-ath +@DRIVER_11N_SUPPORT - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_core.ko -endef - -define KernelPackage/ath6kl-sdio - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 802.11n SDIO wireless cards support - URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl - DEPENDS+= +kmod-mmc +kmod-ath6kl - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_sdio.ko - AUTOLOAD:=$(call AutoProbe,ath6kl_sdio) -endef - -define KernelPackage/ath6kl-sdio/description -This module adds support for wireless adapters based on -Atheros IEEE 802.11n AR6003 and AR6004 family of chipsets. -endef - -define KernelPackage/ath6kl-usb - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 802.11n USB wireless cards support - URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl - DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-ath6kl - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_usb.ko - AUTOLOAD:=$(call AutoProbe,ath6kl_usb) -endef - -define KernelPackage/ath6kl-usb/description -This module adds support for wireless adapters based on the -Atheros IEEE 802.11n AR6004 chipset. -endef - -define KernelPackage/ath9k-common - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc) - URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k - HIDDEN:=1 - DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath79 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko -endef - -define KernelPackage/ath9k - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 802.11n PCI wireless cards support - URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k - DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx||TARGET_ath79 +kmod-ath9k-common - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko - AUTOLOAD:=$(call AutoProbe,ath9k) -endef - -define KernelPackage/ath9k/description -This module adds support for wireless adapters based on -Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets. -endef - -define KernelPackage/ath9k/config - - config ATH9K_SUPPORT_PCOEM - bool "Support chips used in PC OEM cards" - depends on PACKAGE_kmod-ath9k - - config ATH9K_TX99 - bool "Enable TX99 support (WARNING: testing only, breaks normal operation!)" - depends on PACKAGE_kmod-ath9k - - config ATH9K_UBNTHSR - bool "Support for Ubiquiti UniFi Outdoor+ access point" - depends on PACKAGE_kmod-ath9k && (TARGET_ar71xx_generic||TARGET_ath79) - default y - -endef - -define KernelPackage/ath9k-htc - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 802.11n USB device support - URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k - DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core +ath9k-htc-firmware - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko - AUTOLOAD:=$(call AutoProbe,ath9k_htc) -endef - -define KernelPackage/ath9k-htc/description -This module adds support for wireless adapters based on -Atheros USB AR9271 and AR7010 family of chipsets. -endef - -define KernelPackage/ath10k - $(call KernelPackage/mac80211/Default) - TITLE:=Atheros 802.11ac wireless cards support - URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath10k - DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT \ - +ATH10K_THERMAL:kmod-hwmon-core +ATH10K_THERMAL:kmod-thermal - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko - AUTOLOAD:=$(call AutoProbe,ath10k_pci) -endef - -define KernelPackage/ath10k/description -This module adds support for wireless adapters based on -Atheros IEEE 802.11ac family of chipsets. For now only -PCI is supported. -endef - -define KernelPackage/ath10k/config - - config ATH10K_LEDS - bool "Enable LED support" - default y - depends on PACKAGE_kmod-ath10k - - config ATH10K_THERMAL - bool "Enable thermal sensors and throttling support" - depends on PACKAGE_kmod-ath10k - -endef - -#Broadcom firmware -ifneq ($(CONFIG_B43_FW_6_30),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=6.30.163.46 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ - PKG_B43_FWV4_HASH:=a07c3b6b277833c7dbe61daa511f908cd66c5e2763eb7a0859abc36cd9335c2d -else -ifneq ($(CONFIG_B43_FW_5_10),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=5.10.56.27.3 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ - PKG_B43_FWV4_HASH:=26a8c370f48fc129d0731cfd751c36cae1419b0bc8ca35781126744e60eae009 -else -ifneq ($(CONFIG_B43_FW_4_178),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=4.178.10.4 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ - PKG_B43_FWV4_HASH:=32f6ad98facbb9045646fdc8b54bb03086d204153253f9c65d0234a5d90ae53f -else -ifneq ($(CONFIG_B43_FW_5_100_138),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=5.100.138 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ - PKG_B43_FWV4_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f -else - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=4.150.10.5 - PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o - PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 - PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ - PKG_B43_FWV4_HASH:=a9f4e276a4d8d3a1cd0f2eb87080ae89b77f0a7140f06d4e9e2135fc44fdd533 -endif -endif -endif -endif -ifneq ($(CONFIG_B43_OPENFIRMWARE),) - PKG_B43_FWV4_NAME:=broadcom-wl - PKG_B43_FWV4_VERSION:=5.2 - PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION) - PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz - PKG_B43_FWV4_SOURCE_URL:=http://netweb.ing.unibs.it/~openfwwf/firmware - PKG_B43_FWV4_HASH:=9de03320083201080b2e94b81637ac07a159cf4e6f3481383e1a217e627bc0dc -endif - - -define Download/b43 - FILE:=$(PKG_B43_FWV4_SOURCE) - URL:=$(PKG_B43_FWV4_SOURCE_URL) - HASH:=$(PKG_B43_FWV4_HASH) -endef -$(eval $(call Download,b43)) - -define KernelPackage/b43 - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom 43xx wireless support - URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 - KCONFIG:= \ - CONFIG_HW_RANDOM=y - # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb - DEPENDS += \ - @PCI_SUPPORT +kmod-mac80211 \ - $(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \ - $(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko - AUTOLOAD:=$(call AutoProbe,b43) - MENU:=1 -endef - -define KernelPackage/b43/config - -config PACKAGE_B43_USE_SSB - select PACKAGE_kmod-ssb - tristate - depends on !TARGET_brcm47xx && !TARGET_brcm63xx - default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB - default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB - -config PACKAGE_B43_USE_BCMA - select PACKAGE_kmod-bcma - tristate - depends on !TARGET_brcm47xx && !TARGET_bcm53xx - default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB - default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA - - if PACKAGE_kmod-b43 - - choice - prompt "b43 firmware version" - default B43_FW_5_100_138 - help - This option allows you to select the version of the b43 firmware. - - config B43_FW_4_150 - bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)" - help - Old stable firmware for BCM43xx devices. - - If unsure, select this. - - config B43_FW_4_178 - bool "Firmware 478.104 from driver 4.178.10.4" - help - Older firmware for BCM43xx devices. - - If unsure, select the "stable" firmware. - - config B43_FW_5_10 - bool "Firmware 508.1084 from driver 5.10.56.27" - help - Older firmware for BCM43xx devices. - - If unsure, select the "stable" firmware. - - config B43_FW_5_100_138 - bool "Firmware 666.2 from driver 5.100.138 (stable)" - help - The currently default firmware for BCM43xx devices. - - This firmware currently gets most of the testing and is needed for some N-PHY devices. - - If unsure, select the this firmware. - - config B43_FW_6_30 - bool "Firmware 784.2 from driver 6.30.163.46 (experimental)" - help - Newer experimental firmware for BCM43xx devices. - - This firmware is mostly untested. - - If unsure, select the "stable" firmware. - - config B43_OPENFIRMWARE - bool "Open FirmWare for WiFi networks" - help - Opensource firmware for BCM43xx devices. - - Do _not_ select this, unless you know what you are doing. - The Opensource firmware is not suitable for embedded devices, yet. - It does not support QoS, which is bad for AccessPoints. - It does not support hardware crypto acceleration, which is a showstopper - for embedded devices with low CPU resources. - - If unsure, select the "stable" firmware. - - endchoice - - config B43_FW_SQUASH - bool "Remove unnecessary firmware files" - depends on !B43_OPENFIRMWARE - default y - help - This options allows you to remove unnecessary b43 firmware files - from the final rootfs image. This can reduce the rootfs size by - up to 200k. - - If unsure, say Y. - - config B43_FW_SQUASH_COREREVS - string "Core revisions to include" - depends on B43_FW_SQUASH - default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy - default "16,28,29,30" if TARGET_brcm47xx_mips74k - default "5,6,7,8,9,10,11,13,15,16,28,29,30" - help - This is a comma seperated list of core revision numbers. - - Example (keep files for rev5 only): - 5 - - Example (keep files for rev5 and rev11): - 5,11 - - config B43_FW_SQUASH_PHYTYPES - string "PHY types to include" - depends on B43_FW_SQUASH - default "G,N,LP" if TARGET_brcm47xx_legacy - default "N,HT" if TARGET_brcm47xx_mips74k - default "G,N,LP,HT" - help - This is a comma seperated list of PHY types: - A => A-PHY - AG => Dual A-PHY G-PHY - G => G-PHY - LP => LP-PHY - N => N-PHY - HT => HT-PHY - LCN => LCN-PHY - LCN40 => LCN40-PHY - AC => AC-PHY - - Example (keep files for G-PHY only): - G - - Example (keep files for G-PHY and N-PHY): - G,N - - choice - prompt "Supported buses" - default PACKAGE_B43_BUSES_BCMA_AND_SSB - help - This allows choosing buses that b43 should support. - - config PACKAGE_B43_BUSES_BCMA_AND_SSB - depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx - bool "BCMA and SSB" - - config PACKAGE_B43_BUSES_BCMA - depends on !TARGET_brcm47xx_legacy - bool "BCMA only" - - config PACKAGE_B43_BUSES_SSB - depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx - bool "SSB only" - - endchoice - - config PACKAGE_B43_DEBUG - bool "Enable debug output and debugfs for b43" - default n - help - Enable additional debug output and runtime sanity checks for b43 - and enables the debugfs interface. - - If unsure, say N. - - config PACKAGE_B43_PIO - bool "Enable support for PIO transfer mode" - default n - help - Enable support for using PIO instead of DMA. Unless you have DMA - transfer problems you don't need this. - - If unsure, say N. - - config PACKAGE_B43_PHY_G - bool "Enable support for G-PHYs" - default n if TARGET_brcm47xx_mips74k - default y - help - Enable support for G-PHY. This includes support for the following devices: - PCI: BCM4306, BCM4311, BCM4318 - SoC: BCM5352E, BCM4712 - - If unsure, say Y. - - config PACKAGE_B43_PHY_N - bool "Enable support for N-PHYs" - default y - help - Enable support for N-PHY. This includes support for the following devices: - PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225 - SoC: BCM4716, BCM4717, BCM4718 - - Currently only 11g speed is available. - - If unsure, say Y. - - config PACKAGE_B43_PHY_LP - bool "Enable support for LP-PHYs" - default n if TARGET_brcm47xx_mips74k - default y - help - Enable support for LP-PHY. This includes support for the following devices: - PCI: BCM4312 - SoC: BCM5354 - - If unsure, say Y. - - config PACKAGE_B43_PHY_HT - bool "Enable support for HT-PHYs" - default n if TARGET_brcm47xx_legacy - default y - help - Enable support for HT-PHY. This includes support for the following devices: - PCI: BCM4331 - - Currently only 11g speed is available. - - If unsure, say Y. - - config PACKAGE_B43_PHY_LCN - bool "Enable support for LCN-PHYs" - depends on BROKEN - default n - help - Currently broken. - - If unsure, say N. - - endif -endef - -define KernelPackage/b43/description -Kernel module for Broadcom 43xx wireless support (mac80211 stack) new -endef - -define KernelPackage/b43legacy - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom 43xx-legacy wireless support - URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 - KCONFIG:= \ - CONFIG_HW_RANDOM=y - DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb +b43legacy-firmware - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko - AUTOLOAD:=$(call AutoProbe,b43legacy) - MENU:=1 -endef - -define KernelPackage/b43legacy/description -Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new -endef - - -define KernelPackage/brcmutil - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom IEEE802.11n common driver parts - URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 - DEPENDS+=@PCI_SUPPORT||USB_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko - AUTOLOAD:=$(call AutoProbe,brcmutil) - MENU:=1 -endef - -define KernelPackage/brcmutil/description - This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac. -endef - -define KernelPackage/brcmutil/config - if PACKAGE_kmod-brcmutil - - config PACKAGE_BRCM80211_DEBUG - bool "Broadcom wireless driver debugging" - help - Say Y, if you want to debug brcmsmac and brcmfmac wireless driver. - - endif -endef - -PKG_BRCMSMAC_FW_NAME:=broadcom-wl -PKG_BRCMSMAC_FW_VERSION:=5.100.138 -PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o -PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2 -PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ -PKG_BRCMSMAC_FW_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f - -define Download/brcmsmac - FILE:=$(PKG_BRCMSMAC_FW_SOURCE) - URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL) - HASH:=$(PKG_BRCMSMAC_FW_HASH) -endef -$(eval $(call Download,brcmsmac)) - -define KernelPackage/brcmsmac - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver - URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 - DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko - AUTOLOAD:=$(call AutoProbe,brcmsmac) - MENU:=1 -endef - -define KernelPackage/brcmsmac/description - Kernel module for Broadcom IEEE802.11n PCIe Wireless cards -endef - -define KernelPackage/brcmsmac/config - if PACKAGE_kmod-brcmsmac - - config BRCMSMAC_USE_FW_FROM_WL - bool "Use firmware extracted from broadcom proprietary driver" - default y - help - Instead of using the official brcmsmac firmware a firmware - version 666.2 extracted from the proprietary Broadcom driver - is used. This is needed to get core rev 17 used in bcm4716 - to work. - - If unsure, say Y. - - endif -endef - - -define KernelPackage/brcmfmac - $(call KernelPackage/mac80211/Default) - TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver - URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 - DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +kmod-brcmutil \ - +BRCMFMAC_SDIO:kmod-mmc @!TARGET_uml \ - +BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko - AUTOLOAD:=$(call AutoProbe,brcmfmac) -endef - -define KernelPackage/brcmfmac/description - Kernel module for Broadcom IEEE802.11n USB Wireless cards -endef - -define KernelPackage/brcmfmac/config - if PACKAGE_kmod-brcmfmac - - config BRCMFMAC_SDIO - bool "Enable SDIO bus interface support" - default y if TARGET_brcm2708 - default y if TARGET_sunxi - default n - help - Enable support for cards attached to an SDIO bus. - Select this option only if you are sure that your - board has a Broadcom wireless chip atacched to - that bus. - - config BRCMFMAC_USB - bool "Enable USB bus interface support" - depends on USB_SUPPORT - default y - help - Supported USB connected chipsets: - BCM43235, BCM43236, BCM43238 (all in revision 3 only) - BCM43143, BCM43242, BCM43566, BCM43569 - - config BRCMFMAC_PCIE - bool "Enable PCIE bus interface support" - depends on PCI_SUPPORT - default y - help - Supported PCIe connected chipsets: - BCM4354, BCM4356, BCM43567, BCM43570, BCM43602 - - endif -endef - - -define KernelPackage/carl9170 - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for Atheros AR9170 USB sticks - DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT +carl9170-firmware - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko - AUTOLOAD:=$(call AutoProbe,carl9170) -endef - - define KernelPackage/hermes $(call KernelPackage/mac80211/Default) TITLE:=Hermes 802.11b chipset support @@ -866,114 +218,6 @@ define KernelPackage/hermes-pcmcia/description endef -define KernelPackage/iwlwifi - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT @!LINUX_3_18 - TITLE:=Intel AGN Wireless support - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko - AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm iwlmvm) - MENU:=1 -endef - -define KernelPackage/iwlwifi/description - iwlwifi kernel module for - Intel Wireless WiFi Link 6250AGN Adapter - Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN) - Intel WiFi Link 1000BGN - Intel Wireless WiFi 5150AGN - Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN - Intel 6005 Series Wi-Fi Adapters - Intel 6030 Series Wi-Fi Adapters - Intel Wireless WiFi Link 6150BGN 2 Adapter - Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN) - Intel 2000 Series Wi-Fi Adapters - Intel 7260 Wi-Fi Adapter - Intel 3160 Wi-Fi Adapter - Intel 7265 Wi-Fi Adapter - Intel 8260 Wi-Fi Adapter - Intel 3165 Wi-Fi Adapter -endef - -define KernelPackage/iwlwifi/config - if PACKAGE_kmod-iwlwifi - - config PACKAGE_IWLWIFI_DEBUG - bool "Enable full debugging output in the iwlwifi driver" - default n - help - This option will enable debug tracing output for the iwlwifi drivers - - This will result in the kernel module being ~100k larger. You can - control which debug output is sent to the kernel log by setting the - value in - - /sys/module/iwlwifi/parameters/debug - - This entry will only exist if this option is enabled. - - To set a value, simply echo an 8-byte hex value to the same file: - - % echo 0x43fff > /sys/module/iwlwifi/parameters/debug - - You can find the list of debug mask values in: - drivers/net/wireless/intel/iwlwifi/iwl-debug.h - - If this is your first time using this driver, you should say Y here - as the debug information can assist others in helping you resolve - any problems you may encounter. - - config PACKAGE_IWLWIFI_DEBUGFS - bool "iwlwifi debugfs support" - depends on PACKAGE_MAC80211_DEBUGFS - default n - help - Enable creation of debugfs files for the iwlwifi drivers. This - is a low-impact option that allows getting insight into the - driver's state at runtime. - - endif -endef - -define KernelPackage/iwl-legacy - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 @PCI_SUPPORT - TITLE:=Intel legacy Wireless support - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwlegacy.ko - AUTOLOAD:=$(call AutoProbe,iwlegacy) -endef - -define KernelPackage/iwl-legacy/description - iwl-legacy kernel module for legacy Intel wireless support -endef - -define KernelPackage/iwl3945 - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +iwl3945-firmware - TITLE:=Intel iwl3945 Wireless support - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl3945.ko - AUTOLOAD:=$(call AutoProbe,iwl3945) -endef - -define KernelPackage/iwl3945/description - iwl3945 kernel module for Intel 3945 support -endef - -define KernelPackage/iwl4965 - $(call KernelPackage/mac80211/Default) - DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT +iwl4965-firmware - TITLE:=Intel iwl4965 Wireless support - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl4965.ko - AUTOLOAD:=$(call AutoProbe,iwl4965) -endef - -define KernelPackage/iwl4965/description - iwl4965 kernel module for Intel 4965 support -endef - - define KernelPackage/lib80211 $(call KernelPackage/mac80211/Default) TITLE:=802.11 Networking stack @@ -1001,109 +245,6 @@ define KernelPackage/lib80211/description endef -define KernelPackage/libipw - $(call KernelPackage/mac80211/Default) - TITLE:=libipw for ipw2100 and ipw2200 - DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-crypto-ecb +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN @!LINUX_3_18 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/libipw.ko - AUTOLOAD:=$(call AutoProbe,libipw) -endef - -define KernelPackage/libipw/description - Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200. -endef - -IPW2100_NAME:=ipw2100-fw -IPW2100_VERSION:=1.3 - -define Download/ipw2100 - URL:= \ - https://src.fedoraproject.org/repo/pkgs/ipw2100-firmware/ipw2100-fw-1.3.tgz/46aa75bcda1a00efa841f9707bbbd113/ \ - https://archlinux.mirror.pkern.at/other/packages/ipw2100-fw/ \ - http://mirror.ox.ac.uk/sites/ftp.openbsd.org/pub/OpenBSD/distfiles/firmware/ \ - http://firmware.openbsd.org/firmware-dist/ - FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz - HASH:=e1107c455e48d324a616b47a622593bc8413dcce72026f72731c0b03dae3a7a2 -endef -$(eval $(call Download,ipw2100)) - -define KernelPackage/ipw2100 - $(call KernelPackage/mac80211/Default) - TITLE:=Intel IPW2100 driver - DEPENDS:=@PCI_SUPPORT +kmod-libipw - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2100.ko - AUTOLOAD:=$(call AutoProbe,ipw2100) -endef - -define KernelPackage/ipw2100/description - Kernel support for Intel IPW2100 - Includes: - - ipw2100 -endef - -IPW2200_NAME:=ipw2200-fw -IPW2200_VERSION:=3.1 - -define Download/ipw2200 - URL:= \ - https://src.fedoraproject.org/repo/pkgs/ipw2200-firmware/ipw2200-fw-3.1.tgz/eaba788643c7cc7483dd67ace70f6e99/ \ - https://archlinux.mirror.pkern.at/other/packages/ipw2200-fw/ \ - http://mirror.ox.ac.uk/sites/ftp.openbsd.org/pub/OpenBSD/distfiles/firmware/ \ - http://firmware.openbsd.org/firmware-dist/ - FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz - HASH:=c6818c11c18cc030d55ff83f64b2bad8feef485e7742f84f94a61d811a6258bd -endef -$(eval $(call Download,ipw2200)) - -define KernelPackage/ipw2200 - $(call KernelPackage/mac80211/Default) - TITLE:=Intel IPW2200 driver - DEPENDS:=@PCI_SUPPORT +kmod-libipw - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2200.ko - AUTOLOAD:=$(call AutoProbe,ipw2200) -endef - -define KernelPackage/ipw2200/description - Kernel support for Intel IPW2200 - Includes: - - ipw2200 -endef - - -define KernelPackage/libertas-usb - $(call KernelPackage/mac80211/Default) - DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-usb-firmware @!LINUX_3_18 - TITLE:=Marvell 88W8015 Wireless Driver - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/usb8xxx.ko - AUTOLOAD:=$(call AutoProbe,libertas usb8xxx) -endef - -define KernelPackage/libertas-sdio - $(call KernelPackage/mac80211/Default) - DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware @!LINUX_3_18 - TITLE:=Marvell 88W8686 Wireless Driver - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_sdio.ko - AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio) -endef - -define KernelPackage/libertas-spi - $(call KernelPackage/mac80211/Default) - SUBMENU:=Wireless Drivers - DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-spi-firmware @!LINUX_3_18 - KCONFIG := \ - CONFIG_SPI=y \ - CONFIG_SPI_MASTER=y - TITLE:=Marvell 88W8686 SPI Wireless Driver - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_spi.ko - AUTOLOAD:=$(call AutoProbe,libertas libertas_spi) -endef - define KernelPackage/mac80211-hwsim $(call KernelPackage/mac80211/Default) TITLE:=mac80211 HW simulation device @@ -1121,51 +262,6 @@ define KernelPackage/mt7601u AUTOLOAD:=$(call AutoProbe,mt7601u) endef - -define KernelPackage/mwl8k - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards - URL:=https://wireless.wiki.kernel.org/en/users/drivers/mwl8k - DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwl8k-firmware - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwl8k.ko - AUTOLOAD:=$(call AutoProbe,mwl8k) -endef - -define KernelPackage/mwl8k/description - Kernel modules for Marvell TOPDOG 802.11 Wireless cards -endef - - -define KernelPackage/mwifiex-pcie - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards - URL:=https://wireless.wiki.kernel.org/en/users/drivers/mwifiex - DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-pcie-firmware - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_pcie.ko - AUTOLOAD:=$(call AutoProbe,mwifiex_pcie) -endef - -define KernelPackage/mwifiex-pcie/description - Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards -endef - -define KernelPackage/mwifiex-sdio - $(call KernelPackage/mac80211/Default) - TITLE:=Driver for Marvell 802.11n/802.11ac SDIO Wireless cards - URL:=https://wireless.wiki.kernel.org/en/users/drivers/mwifiex - DEPENDS+= +kmod-mmc +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-sdio-firmware - FILES:= \ - $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_sdio.ko - AUTOLOAD:=$(call AutoProbe,mwifiex_sdio) -endef - -define KernelPackage/mwifiex-sdio/description - Kernel modules for Marvell 802.11n/802.11ac SDIO Wireless cards -endef - define KernelPackage/p54/Default $(call KernelPackage/mac80211/Default) TITLE:=Prism54 Drivers @@ -1230,297 +326,6 @@ define KernelPackage/rsi91x-sdio endef - -define KernelPackage/rt2x00/Default - $(call KernelPackage/mac80211/Default) - TITLE:=Ralink Drivers for RT2x00 cards -endef - -define KernelPackage/rt2x00-lib -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t - TITLE+= (LIB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko - MENU:=1 -endef - -define KernelPackage/rt2x00-lib/config - if PACKAGE_kmod-rt2x00-lib - - config PACKAGE_RT2X00_LIB_DEBUGFS - bool "Enable rt2x00 debugfs support" - depends on PACKAGE_MAC80211_DEBUGFS - help - Enable creation of debugfs files for the rt2x00 drivers. - These debugfs files support both reading and writing of the - most important register types of the rt2x00 hardware. - - config PACKAGE_RT2X00_DEBUG - bool "Enable rt2x00 debug output" - help - Enable debugging output for all rt2x00 modules - - endif -endef - -define KernelPackage/rt2x00-mmio -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6 - HIDDEN:=1 - TITLE+= (MMIO) - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko -endef - -define KernelPackage/rt2x00-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib - HIDDEN:=1 - TITLE+= (PCI) - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko - AUTOLOAD:=$(call AutoProbe,rt2x00pci) -endef - -define KernelPackage/rt2x00-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core - HIDDEN:=1 - TITLE+= (USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko - AUTOLOAD:=$(call AutoProbe,rt2x00usb) -endef - -define KernelPackage/rt2800-lib -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT - HIDDEN:=1 - TITLE+= (rt2800 LIB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko -endef - -define KernelPackage/rt2400-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2400 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2400pci.ko - AUTOLOAD:=$(call AutoProbe,rt2400pci) -endef - -define KernelPackage/rt2500-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2500 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500pci.ko - AUTOLOAD:=$(call AutoProbe,rt2500pci) -endef - -define KernelPackage/rt2500-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb - TITLE+= (RT2500 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500usb.ko - AUTOLOAD:=$(call AutoProbe,rt2500usb) -endef - -define KernelPackage/rt2800-mmio -$(call KernelPackage/rt2x00/Default) - TITLE += (RT28xx/RT3xxx MMIO) - DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio - HIDDEN:=1 - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko -endef - -define KernelPackage/rt2800-soc -$(call KernelPackage/rt2x00/Default) - DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib - TITLE += (RT28xx/RT3xxx SoC) - FILES := \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00soc.ko \ - $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800soc.ko - AUTOLOAD:=$(call AutoProbe,rt2800soc) -endef - -define KernelPackage/rt2800-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio +rt2800-pci-firmware - TITLE+= (RT2860 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko - AUTOLOAD:=$(call AutoProbe,rt2800pci) -endef - -define KernelPackage/rt2800-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt +rt2800-usb-firmware - TITLE+= (RT2870 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko - AUTOLOAD:=$(call AutoProbe,rt2800usb) -endef - - -define KernelPackage/rt61-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +rt61-pci-firmware - TITLE+= (RT2x61 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko - AUTOLOAD:=$(call AutoProbe,rt61pci) -endef - -define KernelPackage/rt73-usb - $(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +rt73-usb-firmware - TITLE+= (RT73 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko - AUTOLOAD:=$(call AutoProbe,rt73usb) -endef - - -define KernelPackage/rtl818x/Default - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek Drivers for RTL818x devices - URL:=https://wireless.wiki.kernel.org/en/users/drivers/rtl8187 - DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211 -endef - -define KernelPackage/rtl8180 - $(call KernelPackage/rtl818x/Default) - DEPENDS+= @PCI_SUPPORT - TITLE+= (RTL8180 PCI) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl818x_pci.ko - AUTOLOAD:=$(call AutoProbe,rtl818x_pci) -endef - -define KernelPackage/rtl8187 -$(call KernelPackage/rtl818x/Default) - DEPENDS+= @USB_SUPPORT +kmod-usb-core - TITLE+= (RTL8187 USB) - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.ko - AUTOLOAD:=$(call AutoProbe,rtl8187) -endef - -define KernelPackage/rtlwifi/config - config PACKAGE_RTLWIFI_DEBUG - bool "Realtek wireless debugging" - depends on PACKAGE_kmod-rtlwifi - help - Say Y, if you want to debug realtek wireless drivers. - -endef - -define KernelPackage/rtlwifi - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek common driver part - DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtlwifi.ko - HIDDEN:=1 -endef - -define KernelPackage/rtlwifi-pci - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek common driver part (PCI support) - DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_pci.ko - AUTOLOAD:=$(call AutoProbe,rtl_pci) - HIDDEN:=1 -endef - -define KernelPackage/rtlwifi-btcoexist - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek BT coexist support - DEPENDS+= +kmod-rtlwifi - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/btcoexist/btcoexist.ko - AUTOLOAD:=$(call AutoProbe,btcoexist) - HIDDEN:=1 -endef - -define KernelPackage/rtlwifi-usb - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek common driver part (USB support) - DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_usb.ko - AUTOLOAD:=$(call AutoProbe,rtl_usb) - HIDDEN:=1 -endef - -define KernelPackage/rtl8192c-common - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8192CE/RTL8192CU common support module - DEPENDS+= +kmod-rtlwifi - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192c/rtl8192c-common.ko - HIDDEN:=1 -endef - -define KernelPackage/rtl8192ce - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8192CE/RTL8188CE support - DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common +rtl8192ce-firmware - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rtl8192ce.ko - AUTOLOAD:=$(call AutoProbe,rtl8192ce) -endef - -define KernelPackage/rtl8192se - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8192SE/RTL8191SE support - DEPENDS+= +kmod-rtlwifi-pci +rtl8192se-firmware - FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rtl8192se.ko - AUTOLOAD:=$(call AutoProbe,rtl8192se) -endef - -define KernelPackage/rtl8192de - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8192DE/RTL8188DE support - DEPENDS+= +kmod-rtlwifi-pci +rtl8192de-firmware - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rtl8192de.ko - AUTOLOAD:=$(call AutoProbe,rtl8192de) -endef - -define KernelPackage/rtl8192cu - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8192CU/RTL8188CU support - DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common +rtl8192cu-firmware - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rtl8192cu.ko - AUTOLOAD:=$(call AutoProbe,rtl8192cu) -endef - -define KernelPackage/rtl8821ae - $(call KernelPackage/mac80211/Default) - TITLE:=Realtek RTL8821AE support - DEPENDS+= +kmod-rtlwifi-btcoexist +kmod-rtlwifi-pci +rtl8821ae-firmware - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rtl8821ae.ko - AUTOLOAD:=$(call AutoProbe,rtl8821ae) -endef - -define KernelPackage/rtl8xxxu - $(call KernelPackage/mac80211/Default) - TITLE:=alternative Realtek RTL8XXXU support - DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211 - FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko - AUTOLOAD:=$(call AutoProbe,rtl8xxxu) -endef - -define KernelPackage/rtl8xxxu/description - This is an alternative driver for various Realtek RTL8XXX - parts written to utilize the Linux mac80211 stack. - The driver is known to work with a number of RTL8723AU, - RL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU devices - - This driver is under development and has a limited feature - set. In particular it does not yet support 40MHz channels - and power management. However it should have a smaller - memory footprint than the vendor drivers and benetifs - from the in kernel mac80211 stack. - - It can coexist with drivers from drivers/staging/rtl8723au, - drivers/staging/rtl8192u, and drivers/net/wireless/rtlwifi, - but you will need to control which module you wish to load. - - RTL8XXXU_UNTESTED is enabled - This option enables detection of Realtek 8723/8188/8191/8192 WiFi - USB devices which have not been tested directly by the driver - author or reported to be working by third parties. - - Please report your results! -endef - - define KernelPackage/wlcore $(call KernelPackage/mac80211/Default) TITLE:=TI common driver part @@ -1579,58 +384,14 @@ define KernelPackage/zd1211rw AUTOLOAD:=$(call AutoProbe,zd1211rw) endef - - -config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m) - -config-y:= \ - WLAN \ - NL80211_TESTMODE \ - CFG80211_WEXT \ - CFG80211_CERTIFICATION_ONUS \ - MAC80211_RC_MINSTREL \ - MAC80211_RC_MINSTREL_HT \ - MAC80211_RC_MINSTREL_VHT \ - MAC80211_RC_DEFAULT_MINSTREL \ - WLAN_VENDOR_ADMTEK \ - WLAN_VENDOR_ATH \ - WLAN_VENDOR_ATMEL \ - WLAN_VENDOR_BROADCOM \ - WLAN_VENDOR_CISCO \ - WLAN_VENDOR_INTEL \ - WLAN_VENDOR_INTERSIL \ - WLAN_VENDOR_MARVELL \ - WLAN_VENDOR_MEDIATEK \ - WLAN_VENDOR_RALINK \ - WLAN_VENDOR_REALTEK \ - WLAN_VENDOR_RSI \ - WLAN_VENDOR_ST \ - WLAN_VENDOR_TI \ - WLAN_VENDOR_ZYDAS \ - -config-$(call config_package,cfg80211) += CFG80211 - -config-$(call config_package,mac80211) += MAC80211 -config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS config-y += \ CFG80211_DEBUGFS \ - MAC80211_DEBUGFS \ - ATH9K_DEBUGFS \ - ATH9K_HTC_DEBUGFS \ - ATH10K_DEBUGFS \ - CARL9170_DEBUGFS \ - ATH5K_DEBUG \ - ATH6KL_DEBUG + MAC80211_DEBUGFS endif ifdef CONFIG_PACKAGE_MAC80211_TRACING config-y += \ - ATH10K_TRACING \ - ATH6KL_TRACING \ - ATH_TRACEPOINTS \ - WIL6210_TRACING \ - ATH5K_TRACER \ IWLWIFI_DEVICE_TRACING endif @@ -1638,99 +399,10 @@ config-$(call config_package,lib80211) += LIB80211 LIB80211_CRYPT_WEP LIB80211_C config-$(call config_package,airo) += AIRO -config-$(call config_package,ath) += ATH_CARDS ATH_COMMON ATH_REG_DYNAMIC_USER_REG_HINTS -config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG ATH9K_STATION_STATISTICS -config-$(CONFIG_PACKAGE_ATH_DFS) += ATH9K_DFS_CERTIFIED ATH10K_DFS_CERTIFIED -config-$(CONFIG_PACKAGE_ATH_SPECTRAL) += ATH9K_COMMON_SPECTRAL ATH10K_SPECTRAL -config-$(CONFIG_PACKAGE_ATH_DYNACK) += ATH9K_DYNACK -config-$(call config_package,ath9k) += ATH9K -config-$(call config_package,ath9k-common) += ATH9K_COMMON -config-$(CONFIG_TARGET_ar71xx) += ATH9K_AHB -config-$(CONFIG_TARGET_ath79) += ATH9K_AHB -config-$(CONFIG_TARGET_ipq40xx) += ATH10K_AHB -config-$(CONFIG_PCI) += ATH9K_PCI -config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD -config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM -config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99 -config-$(CONFIG_ATH9K_UBNTHSR) += ATH9K_UBNTHSR -config-$(CONFIG_ATH10K_LEDS) += ATH10K_LEDS -config-$(CONFIG_ATH10K_THERMAL) += ATH10K_THERMAL - -config-$(call config_package,ath9k-htc) += ATH9K_HTC -config-$(call config_package,ath10k) += ATH10K ATH10K_PCI - -config-$(call config_package,ath5k) += ATH5K -ifdef CONFIG_TARGET_ath25 - config-y += ATH5K_AHB -else - config-y += ATH5K_PCI -endif - -config-$(call config_package,ath6kl) += ATH6KL -config-$(call config_package,ath6kl-sdio) += ATH6KL_SDIO -config-$(call config_package,ath6kl-usb) += ATH6KL_USB - -config-$(call config_package,carl9170) += CARL9170 - -config-$(call config_package,b43) += B43 -config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB -config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA -config-$(CONFIG_PACKAGE_B43_BUSES_SSB) += B43_BUSES_SSB -config-$(CONFIG_PACKAGE_B43_PHY_G) += B43_PHY_G -config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N -config-$(CONFIG_PACKAGE_B43_PHY_LP) += B43_PHY_LP -config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT -config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO -config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG - -config-$(call config_package,b43legacy) += B43LEGACY -config-y += B43LEGACY_DMA_MODE - -config-$(call config_package,brcmutil) += BRCMUTIL -config-$(call config_package,brcmsmac) += BRCMSMAC -config-$(call config_package,brcmfmac) += BRCMFMAC -config-$(CONFIG_BRCMFMAC_SDIO) += BRCMFMAC_SDIO -config-$(CONFIG_BRCMFMAC_USB) += BRCMFMAC_USB -config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE -config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG - config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM config-$(call config_package,mt7601u) += MT7601U config-y += WL_MEDIATEK -config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB -config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI -config-$(call config_package,rt2x00-mmio) += RT2X00_LIB_MMIO -config-$(call config_package,rt2x00-usb) += RT2X00_LIB_USB -config-$(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS) += RT2X00_LIB_DEBUGFS -config-$(CONFIG_PACKAGE_RT2X00_DEBUG) += RT2X00_DEBUG - -config-$(call config_package,rt2400-pci) += RT2400PCI -config-$(call config_package,rt2500-pci) += RT2500PCI -config-$(call config_package,rt2500-usb) += RT2500USB -config-$(call config_package,rt61-pci) += RT61PCI -config-$(call config_package,rt73-usb) += RT73USB - -config-$(call config_package,rt2800-lib) += RT2800_LIB - -config-$(call config_package,rt2800-soc) += RT2800SOC -config-$(call config_package,rt2800-pci) += RT2800PCI -config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290 - -config-$(call config_package,rt2800-usb) += RT2800USB -config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX RT2800USB_UNKNOWN - -config-$(call config_package,iwl-legacy) += IWLEGACY -config-$(call config_package,iwl3945) += IWL3945 -config-$(call config_package,iwl4965) += IWL4965 -config-$(call config_package,iwlwifi) += IWLWIFI IWLDVM IWLMVM -config-$(CONFIG_PACKAGE_IWLWIFI_DEBUG)+= IWLWIFI_DEBUG -config-$(CONFIG_PACKAGE_IWLWIFI_DEBUGFS)+= IWLWIFI_DEBUGFS - -config-$(call config_package,libipw) += LIBIPW -config-$(call config_package,ipw2100) += IPW2100 -config-$(call config_package,ipw2200) += IPW2200 - config-$(call config_package,p54-common) += P54_COMMON config-$(call config_package,p54-pci) += P54_PCI config-$(call config_package,p54-usb) += P54_USB @@ -1743,14 +415,6 @@ config-$(call config_package,hermes-pcmcia) += PCMCIA_HERMES config-y += HERMES_PRISM config-$(call config_package,adm8211) += ADM8211 -config-$(call config_package,libertas-sdio) += LIBERTAS LIBERTAS_SDIO -config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB -config-$(call config_package,libertas-spi) += LIBERTAS LIBERTAS_SPI -config-$(call config_package,mwl8k) += MWL8K -config-$(call config_package,mwifiex-pcie) += MWIFIEX MWIFIEX_PCIE -config-$(call config_package,mwifiex-sdio) += MWIFIEX MWIFIEX_SDIO -config-$(call config_package,rtl8180) += RTL8180 -config-$(call config_package,rtl8187) += RTL8187 config-$(call config_package,wlcore) += WLCORE WLCORE_SDIO config-$(call config_package,wl12xx) += WL12XX config-$(call config_package,wl18xx) += WL18XX @@ -1760,22 +424,7 @@ config-$(call config_package,rsi91x) += RSI_91X config-$(call config_package,rsi91x-usb) += RSI_USB config-$(call config_package,rsi91x-sdio) += RSI_SDIO -config-$(call config_package,rtlwifi) += RTL_CARDS RTLWIFI -config-$(call config_package,rtlwifi-pci) += RTLWIFI_PCI -config-$(call config_package,rtlwifi-btcoexist) += RTLBTCOEXIST -config-$(call config_package,rtlwifi-usb) += RTLWIFI_USB -config-$(call config_package,rtl8192c-common) += RTL8192C_COMMON -config-$(call config_package,rtl8192ce) += RTL8192CE -config-$(call config_package,rtl8192se) += RTL8192SE -config-$(call config_package,rtl8192de) += RTL8192DE -config-$(call config_package,rtl8192cu) += RTL8192CU -config-$(call config_package,rtl8821ae) += RTL8821AE -config-$(CONFIG_PACKAGE_RTLWIFI_DEBUG) += RTLWIFI_DEBUG - -config-$(call config_package,rtl8xxxu) += RTL8XXXU -config-y += RTL8XXXU_UNTESTED - -config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS B43_LEDS B43LEGACY_LEDS +config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \ $(KERNEL_MAKE_FLAGS) \ @@ -1901,14 +550,6 @@ ifneq ($(CONFIG_B43_FW_SQUASH),) endif endef -define KernelPackage/brcmsmac/install - $(INSTALL_DIR) $(1)/lib/firmware/brcm -ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y) - tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)" - b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT) -endif -endef - define KernelPackage/cfg80211/install $(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless $(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi @@ -1917,96 +558,11 @@ define KernelPackage/cfg80211/install $(INSTALL_DATA) ./files/mac80211.hotplug $(1)/etc/hotplug.d/ieee80211/10-wifi-detect endef -define KernelPackage/ipw2100/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware -endef - -define KernelPackage/ipw2200/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware -endef - define KernelPackage/zd1211rw/install $(INSTALL_DIR) $(1)/lib/firmware/zd1211 $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211 endef - -$(eval $(call KernelPackage,adm8211)) -$(eval $(call KernelPackage,airo)) -$(eval $(call KernelPackage,ath)) -$(eval $(call KernelPackage,ath10k)) -$(eval $(call KernelPackage,ath5k)) -$(eval $(call KernelPackage,ath6kl)) -$(eval $(call KernelPackage,ath6kl-sdio)) -$(eval $(call KernelPackage,ath6kl-usb)) -$(eval $(call KernelPackage,ath9k)) -$(eval $(call KernelPackage,ath9k-common)) -$(eval $(call KernelPackage,ath9k-htc)) -$(eval $(call KernelPackage,b43)) -$(eval $(call KernelPackage,b43legacy)) -$(eval $(call KernelPackage,brcmsmac)) -$(eval $(call KernelPackage,brcmfmac)) -$(eval $(call KernelPackage,brcmutil)) -$(eval $(call KernelPackage,carl9170)) +$(eval $(foreach drv,$(PKG_DRIVERS),$(call KernelPackage,$(drv)))) $(eval $(call KernelPackage,cfg80211)) -$(eval $(call KernelPackage,hermes)) -$(eval $(call KernelPackage,hermes-pci)) -$(eval $(call KernelPackage,hermes-plx)) -$(eval $(call KernelPackage,hermes-pcmcia)) -$(eval $(call KernelPackage,iwlwifi)) -$(eval $(call KernelPackage,iwl-legacy)) -$(eval $(call KernelPackage,iwl4965)) -$(eval $(call KernelPackage,iwl3945)) -$(eval $(call KernelPackage,lib80211)) -$(eval $(call KernelPackage,libertas-usb)) -$(eval $(call KernelPackage,libertas-sdio)) -$(eval $(call KernelPackage,libertas-spi)) -$(eval $(call KernelPackage,libipw)) -$(eval $(call KernelPackage,ipw2100)) -$(eval $(call KernelPackage,ipw2200)) $(eval $(call KernelPackage,mac80211)) -$(eval $(call KernelPackage,mac80211-hwsim)) -$(eval $(call KernelPackage,mt7601u)) -$(eval $(call KernelPackage,mwl8k)) -$(eval $(call KernelPackage,mwifiex-pcie)) -$(eval $(call KernelPackage,mwifiex-sdio)) -$(eval $(call KernelPackage,p54-common)) -$(eval $(call KernelPackage,p54-pci)) -$(eval $(call KernelPackage,p54-usb)) -$(eval $(call KernelPackage,p54-spi)) -$(eval $(call KernelPackage,rsi91x)) -$(eval $(call KernelPackage,rsi91x-usb)) -$(eval $(call KernelPackage,rsi91x-sdio)) -$(eval $(call KernelPackage,rt2x00-lib)) -$(eval $(call KernelPackage,rt2x00-mmio)) -$(eval $(call KernelPackage,rt2x00-pci)) -$(eval $(call KernelPackage,rt2x00-usb)) -$(eval $(call KernelPackage,rt2800-lib)) -$(eval $(call KernelPackage,rt2400-pci)) -$(eval $(call KernelPackage,rt2500-pci)) -$(eval $(call KernelPackage,rt2500-usb)) -$(eval $(call KernelPackage,rt2800-mmio)) -$(eval $(call KernelPackage,rt2800-soc)) -$(eval $(call KernelPackage,rt2800-pci)) -$(eval $(call KernelPackage,rt2800-usb)) -$(eval $(call KernelPackage,rt61-pci)) -$(eval $(call KernelPackage,rt73-usb)) -$(eval $(call KernelPackage,rtl8180)) -$(eval $(call KernelPackage,rtl8187)) -$(eval $(call KernelPackage,rtlwifi)) -$(eval $(call KernelPackage,rtlwifi-pci)) -$(eval $(call KernelPackage,rtlwifi-btcoexist)) -$(eval $(call KernelPackage,rtlwifi-usb)) -$(eval $(call KernelPackage,rtl8192c-common)) -$(eval $(call KernelPackage,rtl8192ce)) -$(eval $(call KernelPackage,rtl8192se)) -$(eval $(call KernelPackage,rtl8192de)) -$(eval $(call KernelPackage,rtl8192cu)) -$(eval $(call KernelPackage,rtl8821ae)) -$(eval $(call KernelPackage,rtl8xxxu)) -$(eval $(call KernelPackage,wlcore)) -$(eval $(call KernelPackage,wl12xx)) -$(eval $(call KernelPackage,wl18xx)) -$(eval $(call KernelPackage,zd1211rw)) diff --git a/package/kernel/mac80211/ath.mk b/package/kernel/mac80211/ath.mk new file mode 100644 index 000000000..d670c9f89 --- /dev/null +++ b/package/kernel/mac80211/ath.mk @@ -0,0 +1,276 @@ +PKG_DRIVERS += \ + ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k \ + carl9170 + +PKG_CONFIG_DEPENDS += \ + CONFIG_PACKAGE_ATH_DEBUG \ + CONFIG_PACKAGE_ATH_DFS \ + CONFIG_PACKAGE_ATH_SPECTRAL \ + CONFIG_PACKAGE_ATH_DYNACK \ + CONFIG_ATH9K_SUPPORT_PCOEM \ + CONFIG_ATH9K_TX99 \ + CONFIG_ATH10K_LEDS \ + CONFIG_ATH10K_THERMAL \ + CONFIG_ATH_USER_REGD + +ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS + config-y += \ + ATH9K_DEBUGFS \ + ATH9K_HTC_DEBUGFS \ + ATH10K_DEBUGFS \ + CARL9170_DEBUGFS \ + ATH5K_DEBUG \ + ATH6KL_DEBUG +endif + +ifdef CONFIG_PACKAGE_MAC80211_TRACING + config-y += \ + ATH10K_TRACING \ + ATH6KL_TRACING \ + ATH_TRACEPOINTS \ + ATH5K_TRACER +endif + +config-$(call config_package,ath) += ATH_CARDS ATH_COMMON ATH_REG_DYNAMIC_USER_REG_HINTS +config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG ATH9K_STATION_STATISTICS +config-$(CONFIG_PACKAGE_ATH_DFS) += ATH9K_DFS_CERTIFIED ATH10K_DFS_CERTIFIED +config-$(CONFIG_PACKAGE_ATH_SPECTRAL) += ATH9K_COMMON_SPECTRAL ATH10K_SPECTRAL +config-$(CONFIG_PACKAGE_ATH_DYNACK) += ATH9K_DYNACK +config-$(call config_package,ath9k) += ATH9K +config-$(call config_package,ath9k-common) += ATH9K_COMMON +config-$(CONFIG_TARGET_ar71xx) += ATH9K_AHB +config-$(CONFIG_TARGET_ath79) += ATH9K_AHB +config-$(CONFIG_TARGET_ipq40xx) += ATH10K_AHB +config-$(CONFIG_PCI) += ATH9K_PCI +config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD +config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM +config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99 +config-$(CONFIG_ATH9K_UBNTHSR) += ATH9K_UBNTHSR +config-$(CONFIG_ATH10K_LEDS) += ATH10K_LEDS +config-$(CONFIG_ATH10K_THERMAL) += ATH10K_THERMAL + +config-$(call config_package,ath9k-htc) += ATH9K_HTC +config-$(call config_package,ath10k) += ATH10K ATH10K_PCI + +config-$(call config_package,ath5k) += ATH5K +ifdef CONFIG_TARGET_ath25 + config-y += ATH5K_AHB +else + config-y += ATH5K_PCI +endif + +config-$(call config_package,ath6kl) += ATH6KL +config-$(call config_package,ath6kl-sdio) += ATH6KL_SDIO +config-$(call config_package,ath6kl-usb) += ATH6KL_USB + +config-$(call config_package,carl9170) += CARL9170 + +define KernelPackage/ath/config + if PACKAGE_kmod-ath + config ATH_USER_REGD + bool "Force Atheros drivers to respect the user's regdomain settings" + default y + help + Atheros' idea of regulatory handling is that the EEPROM of the card defines + the regulatory limits and the user is only allowed to restrict the settings + even further, even if the country allows frequencies or power levels that + are forbidden by the EEPROM settings. + + Select this option if you want the driver to respect the user's decision about + regulatory settings. + + config PACKAGE_ATH_DEBUG + bool "Atheros wireless debugging" + help + Say Y, if you want to debug atheros wireless drivers. + Only ath9k & ath10k make use of this. + + config PACKAGE_ATH_DFS + bool "Enable DFS support" + default y + help + Dynamic frequency selection (DFS) is required for most of the 5 GHz band + channels in Europe, US, and Japan. + + Select this option if you want to use such channels. + + config PACKAGE_ATH_SPECTRAL + bool "Atheros spectral scan support" + depends on PACKAGE_ATH_DEBUG + select KERNEL_RELAY + help + Say Y to enable access to the FFT/spectral data via debugfs. + + config PACKAGE_ATH_DYNACK + bool "Enable Dynack support" + depends on PACKAGE_kmod-ath9k-common + help + Enables support for Dynamic ACK estimation, which allows the fastest possible speed + at any distance automatically by increasing/decreasing the max frame ACK time for + the most remote station detected. It can be enabled by using iw (iw phy0 set distance auto), + or by sending the NL80211_ATTR_WIPHY_DYN_ACK flag to mac80211 driver using netlink. + + Select this option if you want to enable this feature + + endif +endef + +define KernelPackage/ath + $(call KernelPackage/mac80211/Default) + TITLE:=Atheros common driver part + DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath79||TARGET_ath25 +kmod-mac80211 + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko + MENU:=1 +endef + +define KernelPackage/ath/description + This module contains some common parts needed by Atheros Wireless drivers. +endef + +define KernelPackage/ath5k + $(call KernelPackage/mac80211/Default) + TITLE:=Atheros 5xxx wireless cards support + URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k + DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath +@DRIVER_11W_SUPPORT + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko + AUTOLOAD:=$(call AutoProbe,ath5k) +endef + +define KernelPackage/ath5k/description + This module adds support for wireless adapters based on + Atheros 5xxx chipset. +endef + +define KernelPackage/ath6kl + $(call KernelPackage/mac80211/Default) + TITLE:=Atheros FullMAC wireless devices (common code for ath6kl_sdio and ath6kl_usb) + URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl + HIDDEN:=1 + DEPENDS+= +kmod-ath +@DRIVER_11N_SUPPORT + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_core.ko +endef + +define KernelPackage/ath6kl-sdio + $(call KernelPackage/mac80211/Default) + TITLE:=Atheros 802.11n SDIO wireless cards support + URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl + DEPENDS+= +kmod-mmc +kmod-ath6kl + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_sdio.ko + AUTOLOAD:=$(call AutoProbe,ath6kl_sdio) +endef + +define KernelPackage/ath6kl-sdio/description +This module adds support for wireless adapters based on +Atheros IEEE 802.11n AR6003 and AR6004 family of chipsets. +endef + +define KernelPackage/ath6kl-usb + $(call KernelPackage/mac80211/Default) + TITLE:=Atheros 802.11n USB wireless cards support + URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl + DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-ath6kl + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_usb.ko + AUTOLOAD:=$(call AutoProbe,ath6kl_usb) +endef + +define KernelPackage/ath6kl-usb/description +This module adds support for wireless adapters based on the +Atheros IEEE 802.11n AR6004 chipset. +endef + +define KernelPackage/ath9k-common + $(call KernelPackage/mac80211/Default) + TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc) + URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k + HIDDEN:=1 + DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath79 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko +endef + +define KernelPackage/ath9k + $(call KernelPackage/mac80211/Default) + TITLE:=Atheros 802.11n PCI wireless cards support + URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k + DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx||TARGET_ath79 +kmod-ath9k-common + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko + AUTOLOAD:=$(call AutoProbe,ath9k) +endef + +define KernelPackage/ath9k/description +This module adds support for wireless adapters based on +Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets. +endef + +define KernelPackage/ath9k/config + + config ATH9K_SUPPORT_PCOEM + bool "Support chips used in PC OEM cards" + depends on PACKAGE_kmod-ath9k + + config ATH9K_TX99 + bool "Enable TX99 support (WARNING: testing only, breaks normal operation!)" + depends on PACKAGE_kmod-ath9k + + config ATH9K_UBNTHSR + bool "Support for Ubiquiti UniFi Outdoor+ access point" + depends on PACKAGE_kmod-ath9k && (TARGET_ar71xx_generic||TARGET_ath79) + default y + +endef + +define KernelPackage/ath9k-htc + $(call KernelPackage/mac80211/Default) + TITLE:=Atheros 802.11n USB device support + URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k + DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core +ath9k-htc-firmware + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko + AUTOLOAD:=$(call AutoProbe,ath9k_htc) +endef + +define KernelPackage/ath9k-htc/description +This module adds support for wireless adapters based on +Atheros USB AR9271 and AR7010 family of chipsets. +endef + +define KernelPackage/ath10k + $(call KernelPackage/mac80211/Default) + TITLE:=Atheros 802.11ac wireless cards support + URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath10k + DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT \ + +ATH10K_THERMAL:kmod-hwmon-core +ATH10K_THERMAL:kmod-thermal + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko + AUTOLOAD:=$(call AutoProbe,ath10k_pci) +endef + +define KernelPackage/ath10k/description +This module adds support for wireless adapters based on +Atheros IEEE 802.11ac family of chipsets. For now only +PCI is supported. +endef + +define KernelPackage/ath10k/config + + config ATH10K_LEDS + bool "Enable LED support" + default y + depends on PACKAGE_kmod-ath10k + + config ATH10K_THERMAL + bool "Enable thermal sensors and throttling support" + depends on PACKAGE_kmod-ath10k + +endef + +define KernelPackage/carl9170 + $(call KernelPackage/mac80211/Default) + TITLE:=Driver for Atheros AR9170 USB sticks + DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT +carl9170-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko + AUTOLOAD:=$(call AutoProbe,carl9170) +endef diff --git a/package/kernel/mac80211/broadcom.mk b/package/kernel/mac80211/broadcom.mk new file mode 100644 index 000000000..ae9b5a61e --- /dev/null +++ b/package/kernel/mac80211/broadcom.mk @@ -0,0 +1,487 @@ +PKG_DRIVERS += \ + b43 b43legacy brcmsmac brcmfmac brcmutil + +PKG_CONFIG_DEPENDS += \ + CONFIG_PACKAGE_B43_DEBUG \ + CONFIG_PACKAGE_B43_PIO \ + CONFIG_PACKAGE_B43_PHY_G \ + CONFIG_PACKAGE_B43_PHY_N \ + CONFIG_PACKAGE_B43_PHY_LP \ + CONFIG_PACKAGE_B43_PHY_HT \ + CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB \ + CONFIG_PACKAGE_B43_BUSES_BCMA \ + CONFIG_PACKAGE_B43_BUSES_SSB \ + CONFIG_PACKAGE_BRCM80211_DEBUG + +config-$(call config_package,b43) += B43 +config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB +config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA +config-$(CONFIG_PACKAGE_B43_BUSES_SSB) += B43_BUSES_SSB +config-$(CONFIG_PACKAGE_B43_PHY_G) += B43_PHY_G +config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N +config-$(CONFIG_PACKAGE_B43_PHY_LP) += B43_PHY_LP +config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT +config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO +config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG + +config-$(call config_package,b43legacy) += B43LEGACY +config-y += B43LEGACY_DMA_MODE + +config-$(call config_package,brcmutil) += BRCMUTIL +config-$(call config_package,brcmsmac) += BRCMSMAC +config-$(call config_package,brcmfmac) += BRCMFMAC +config-$(CONFIG_BRCMFMAC_SDIO) += BRCMFMAC_SDIO +config-$(CONFIG_BRCMFMAC_USB) += BRCMFMAC_USB +config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE +config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG + +config-$(CONFIG_LEDS_TRIGGERS) += B43_LEDS B43LEGACY_LEDS + +#Broadcom firmware +ifneq ($(CONFIG_B43_FW_6_30),) + PKG_B43_FWV4_NAME:=broadcom-wl + PKG_B43_FWV4_VERSION:=6.30.163.46 + PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o + PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 + PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ + PKG_B43_FWV4_HASH:=a07c3b6b277833c7dbe61daa511f908cd66c5e2763eb7a0859abc36cd9335c2d +else +ifneq ($(CONFIG_B43_FW_5_10),) + PKG_B43_FWV4_NAME:=broadcom-wl + PKG_B43_FWV4_VERSION:=5.10.56.27.3 + PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o + PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2 + PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ + PKG_B43_FWV4_HASH:=26a8c370f48fc129d0731cfd751c36cae1419b0bc8ca35781126744e60eae009 +else +ifneq ($(CONFIG_B43_FW_4_178),) + PKG_B43_FWV4_NAME:=broadcom-wl + PKG_B43_FWV4_VERSION:=4.178.10.4 + PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o + PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 + PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ + PKG_B43_FWV4_HASH:=32f6ad98facbb9045646fdc8b54bb03086d204153253f9c65d0234a5d90ae53f +else +ifneq ($(CONFIG_B43_FW_5_100_138),) + PKG_B43_FWV4_NAME:=broadcom-wl + PKG_B43_FWV4_VERSION:=5.100.138 + PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o + PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 + PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ + PKG_B43_FWV4_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f +else + PKG_B43_FWV4_NAME:=broadcom-wl + PKG_B43_FWV4_VERSION:=4.150.10.5 + PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o + PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2 + PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/ + PKG_B43_FWV4_HASH:=a9f4e276a4d8d3a1cd0f2eb87080ae89b77f0a7140f06d4e9e2135fc44fdd533 +endif +endif +endif +endif +ifneq ($(CONFIG_B43_OPENFIRMWARE),) + PKG_B43_FWV4_NAME:=broadcom-wl + PKG_B43_FWV4_VERSION:=5.2 + PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION) + PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz + PKG_B43_FWV4_SOURCE_URL:=http://netweb.ing.unibs.it/~openfwwf/firmware + PKG_B43_FWV4_HASH:=9de03320083201080b2e94b81637ac07a159cf4e6f3481383e1a217e627bc0dc +endif + + +define Download/b43 + FILE:=$(PKG_B43_FWV4_SOURCE) + URL:=$(PKG_B43_FWV4_SOURCE_URL) + HASH:=$(PKG_B43_FWV4_HASH) +endef +$(eval $(call Download,b43)) + +define KernelPackage/b43 + $(call KernelPackage/mac80211/Default) + TITLE:=Broadcom 43xx wireless support + URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 + KCONFIG:= \ + CONFIG_HW_RANDOM=y + # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb + DEPENDS += \ + @PCI_SUPPORT +kmod-mac80211 \ + $(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \ + $(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko + AUTOLOAD:=$(call AutoProbe,b43) + MENU:=1 +endef + +define KernelPackage/b43/config + +config PACKAGE_B43_USE_SSB + select PACKAGE_kmod-ssb + tristate + depends on !TARGET_brcm47xx && !TARGET_brcm63xx + default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB + default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB + +config PACKAGE_B43_USE_BCMA + select PACKAGE_kmod-bcma + tristate + depends on !TARGET_brcm47xx && !TARGET_bcm53xx + default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB + default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA + + if PACKAGE_kmod-b43 + + choice + prompt "b43 firmware version" + default B43_FW_5_100_138 + help + This option allows you to select the version of the b43 firmware. + + config B43_FW_4_150 + bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)" + help + Old stable firmware for BCM43xx devices. + + If unsure, select this. + + config B43_FW_4_178 + bool "Firmware 478.104 from driver 4.178.10.4" + help + Older firmware for BCM43xx devices. + + If unsure, select the "stable" firmware. + + config B43_FW_5_10 + bool "Firmware 508.1084 from driver 5.10.56.27" + help + Older firmware for BCM43xx devices. + + If unsure, select the "stable" firmware. + + config B43_FW_5_100_138 + bool "Firmware 666.2 from driver 5.100.138 (stable)" + help + The currently default firmware for BCM43xx devices. + + This firmware currently gets most of the testing and is needed for some N-PHY devices. + + If unsure, select the this firmware. + + config B43_FW_6_30 + bool "Firmware 784.2 from driver 6.30.163.46 (experimental)" + help + Newer experimental firmware for BCM43xx devices. + + This firmware is mostly untested. + + If unsure, select the "stable" firmware. + + config B43_OPENFIRMWARE + bool "Open FirmWare for WiFi networks" + help + Opensource firmware for BCM43xx devices. + + Do _not_ select this, unless you know what you are doing. + The Opensource firmware is not suitable for embedded devices, yet. + It does not support QoS, which is bad for AccessPoints. + It does not support hardware crypto acceleration, which is a showstopper + for embedded devices with low CPU resources. + + If unsure, select the "stable" firmware. + + endchoice + + config B43_FW_SQUASH + bool "Remove unnecessary firmware files" + depends on !B43_OPENFIRMWARE + default y + help + This options allows you to remove unnecessary b43 firmware files + from the final rootfs image. This can reduce the rootfs size by + up to 200k. + + If unsure, say Y. + + config B43_FW_SQUASH_COREREVS + string "Core revisions to include" + depends on B43_FW_SQUASH + default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy + default "16,28,29,30" if TARGET_brcm47xx_mips74k + default "5,6,7,8,9,10,11,13,15,16,28,29,30" + help + This is a comma seperated list of core revision numbers. + + Example (keep files for rev5 only): + 5 + + Example (keep files for rev5 and rev11): + 5,11 + + config B43_FW_SQUASH_PHYTYPES + string "PHY types to include" + depends on B43_FW_SQUASH + default "G,N,LP" if TARGET_brcm47xx_legacy + default "N,HT" if TARGET_brcm47xx_mips74k + default "G,N,LP,HT" + help + This is a comma seperated list of PHY types: + A => A-PHY + AG => Dual A-PHY G-PHY + G => G-PHY + LP => LP-PHY + N => N-PHY + HT => HT-PHY + LCN => LCN-PHY + LCN40 => LCN40-PHY + AC => AC-PHY + + Example (keep files for G-PHY only): + G + + Example (keep files for G-PHY and N-PHY): + G,N + + choice + prompt "Supported buses" + default PACKAGE_B43_BUSES_BCMA_AND_SSB + help + This allows choosing buses that b43 should support. + + config PACKAGE_B43_BUSES_BCMA_AND_SSB + depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx + bool "BCMA and SSB" + + config PACKAGE_B43_BUSES_BCMA + depends on !TARGET_brcm47xx_legacy + bool "BCMA only" + + config PACKAGE_B43_BUSES_SSB + depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx + bool "SSB only" + + endchoice + + config PACKAGE_B43_DEBUG + bool "Enable debug output and debugfs for b43" + default n + help + Enable additional debug output and runtime sanity checks for b43 + and enables the debugfs interface. + + If unsure, say N. + + config PACKAGE_B43_PIO + bool "Enable support for PIO transfer mode" + default n + help + Enable support for using PIO instead of DMA. Unless you have DMA + transfer problems you don't need this. + + If unsure, say N. + + config PACKAGE_B43_PHY_G + bool "Enable support for G-PHYs" + default n if TARGET_brcm47xx_mips74k + default y + help + Enable support for G-PHY. This includes support for the following devices: + PCI: BCM4306, BCM4311, BCM4318 + SoC: BCM5352E, BCM4712 + + If unsure, say Y. + + config PACKAGE_B43_PHY_N + bool "Enable support for N-PHYs" + default y + help + Enable support for N-PHY. This includes support for the following devices: + PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225 + SoC: BCM4716, BCM4717, BCM4718 + + Currently only 11g speed is available. + + If unsure, say Y. + + config PACKAGE_B43_PHY_LP + bool "Enable support for LP-PHYs" + default n if TARGET_brcm47xx_mips74k + default y + help + Enable support for LP-PHY. This includes support for the following devices: + PCI: BCM4312 + SoC: BCM5354 + + If unsure, say Y. + + config PACKAGE_B43_PHY_HT + bool "Enable support for HT-PHYs" + default n if TARGET_brcm47xx_legacy + default y + help + Enable support for HT-PHY. This includes support for the following devices: + PCI: BCM4331 + + Currently only 11g speed is available. + + If unsure, say Y. + + config PACKAGE_B43_PHY_LCN + bool "Enable support for LCN-PHYs" + depends on BROKEN + default n + help + Currently broken. + + If unsure, say N. + + endif +endef + +define KernelPackage/b43/description +Kernel module for Broadcom 43xx wireless support (mac80211 stack) new +endef + +define KernelPackage/b43legacy + $(call KernelPackage/mac80211/Default) + TITLE:=Broadcom 43xx-legacy wireless support + URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43 + KCONFIG:= \ + CONFIG_HW_RANDOM=y + DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb +b43legacy-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko + AUTOLOAD:=$(call AutoProbe,b43legacy) + MENU:=1 +endef + +define KernelPackage/b43legacy/description +Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new +endef + + +define KernelPackage/brcmutil + $(call KernelPackage/mac80211/Default) + TITLE:=Broadcom IEEE802.11n common driver parts + URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 + DEPENDS+=@PCI_SUPPORT||USB_SUPPORT + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko + AUTOLOAD:=$(call AutoProbe,brcmutil) + MENU:=1 +endef + +define KernelPackage/brcmutil/description + This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac. +endef + +define KernelPackage/brcmutil/config + if PACKAGE_kmod-brcmutil + + config PACKAGE_BRCM80211_DEBUG + bool "Broadcom wireless driver debugging" + help + Say Y, if you want to debug brcmsmac and brcmfmac wireless driver. + + endif +endef + +PKG_BRCMSMAC_FW_NAME:=broadcom-wl +PKG_BRCMSMAC_FW_VERSION:=5.100.138 +PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o +PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2 +PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/ +PKG_BRCMSMAC_FW_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f + +define Download/brcmsmac + FILE:=$(PKG_BRCMSMAC_FW_SOURCE) + URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL) + HASH:=$(PKG_BRCMSMAC_FW_HASH) +endef +$(eval $(call Download,brcmsmac)) + +define KernelPackage/brcmsmac + $(call KernelPackage/mac80211/Default) + TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver + URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 + DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko + AUTOLOAD:=$(call AutoProbe,brcmsmac) + MENU:=1 +endef + +define KernelPackage/brcmsmac/description + Kernel module for Broadcom IEEE802.11n PCIe Wireless cards +endef + +define KernelPackage/brcmsmac/config + if PACKAGE_kmod-brcmsmac + + config BRCMSMAC_USE_FW_FROM_WL + bool "Use firmware extracted from broadcom proprietary driver" + default y + help + Instead of using the official brcmsmac firmware a firmware + version 666.2 extracted from the proprietary Broadcom driver + is used. This is needed to get core rev 17 used in bcm4716 + to work. + + If unsure, say Y. + + endif +endef + + +define KernelPackage/brcmfmac + $(call KernelPackage/mac80211/Default) + TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver + URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211 + DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +kmod-brcmutil \ + +BRCMFMAC_SDIO:kmod-mmc @!TARGET_uml \ + +BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko + AUTOLOAD:=$(call AutoProbe,brcmfmac) +endef + +define KernelPackage/brcmfmac/description + Kernel module for Broadcom IEEE802.11n USB Wireless cards +endef + +define KernelPackage/brcmfmac/config + if PACKAGE_kmod-brcmfmac + + config BRCMFMAC_SDIO + bool "Enable SDIO bus interface support" + default y if TARGET_brcm2708 + default y if TARGET_sunxi + default n + help + Enable support for cards attached to an SDIO bus. + Select this option only if you are sure that your + board has a Broadcom wireless chip atacched to + that bus. + + config BRCMFMAC_USB + bool "Enable USB bus interface support" + depends on USB_SUPPORT + default y + help + Supported USB connected chipsets: + BCM43235, BCM43236, BCM43238 (all in revision 3 only) + BCM43143, BCM43242, BCM43566, BCM43569 + + config BRCMFMAC_PCIE + bool "Enable PCIE bus interface support" + depends on PCI_SUPPORT + default y + help + Supported PCIe connected chipsets: + BCM4354, BCM4356, BCM43567, BCM43570, BCM43602 + + endif +endef + +define KernelPackage/brcmsmac/install + $(INSTALL_DIR) $(1)/lib/firmware/brcm +ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y) + tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)" + b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT) +endif +endef diff --git a/package/kernel/mac80211/intel.mk b/package/kernel/mac80211/intel.mk new file mode 100644 index 000000000..fd62dcbdd --- /dev/null +++ b/package/kernel/mac80211/intel.mk @@ -0,0 +1,200 @@ +PKG_DRIVERS += \ + iwl-legacy iwl3945 iwl4965 iwlwifi \ + libipw ipw2100 ipw2200 \ + +config-$(call config_package,iwl-legacy) += IWLEGACY +config-$(call config_package,iwl3945) += IWL3945 +config-$(call config_package,iwl4965) += IWL4965 +config-$(call config_package,iwlwifi) += IWLWIFI IWLDVM IWLMVM +config-$(CONFIG_PACKAGE_IWLWIFI_DEBUG)+= IWLWIFI_DEBUG +config-$(CONFIG_PACKAGE_IWLWIFI_DEBUGFS)+= IWLWIFI_DEBUGFS + +config-$(call config_package,libipw) += LIBIPW +config-$(call config_package,ipw2100) += IPW2100 +config-$(call config_package,ipw2200) += IPW2200 + +define KernelPackage/iwlwifi + $(call KernelPackage/mac80211/Default) + DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT @!LINUX_3_18 + TITLE:=Intel AGN Wireless support + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko + AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm iwlmvm) + MENU:=1 +endef + +define KernelPackage/iwlwifi/description + iwlwifi kernel module for + Intel Wireless WiFi Link 6250AGN Adapter + Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN) + Intel WiFi Link 1000BGN + Intel Wireless WiFi 5150AGN + Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN + Intel 6005 Series Wi-Fi Adapters + Intel 6030 Series Wi-Fi Adapters + Intel Wireless WiFi Link 6150BGN 2 Adapter + Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN) + Intel 2000 Series Wi-Fi Adapters + Intel 7260 Wi-Fi Adapter + Intel 3160 Wi-Fi Adapter + Intel 7265 Wi-Fi Adapter + Intel 8260 Wi-Fi Adapter + Intel 3165 Wi-Fi Adapter +endef + +define KernelPackage/iwlwifi/config + if PACKAGE_kmod-iwlwifi + + config PACKAGE_IWLWIFI_DEBUG + bool "Enable full debugging output in the iwlwifi driver" + default n + help + This option will enable debug tracing output for the iwlwifi drivers + + This will result in the kernel module being ~100k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/module/iwlwifi/parameters/debug + + This entry will only exist if this option is enabled. + + To set a value, simply echo an 8-byte hex value to the same file: + + % echo 0x43fff > /sys/module/iwlwifi/parameters/debug + + You can find the list of debug mask values in: + drivers/net/wireless/intel/iwlwifi/iwl-debug.h + + If this is your first time using this driver, you should say Y here + as the debug information can assist others in helping you resolve + any problems you may encounter. + + config PACKAGE_IWLWIFI_DEBUGFS + bool "iwlwifi debugfs support" + depends on PACKAGE_MAC80211_DEBUGFS + default n + help + Enable creation of debugfs files for the iwlwifi drivers. This + is a low-impact option that allows getting insight into the + driver's state at runtime. + + endif +endef + +define KernelPackage/iwl-legacy + $(call KernelPackage/mac80211/Default) + DEPENDS:= +kmod-mac80211 @PCI_SUPPORT + TITLE:=Intel legacy Wireless support + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwlegacy.ko + AUTOLOAD:=$(call AutoProbe,iwlegacy) +endef + +define KernelPackage/iwl-legacy/description + iwl-legacy kernel module for legacy Intel wireless support +endef + +define KernelPackage/iwl3945 + $(call KernelPackage/mac80211/Default) + DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +iwl3945-firmware + TITLE:=Intel iwl3945 Wireless support + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl3945.ko + AUTOLOAD:=$(call AutoProbe,iwl3945) +endef + +define KernelPackage/iwl3945/description + iwl3945 kernel module for Intel 3945 support +endef + +define KernelPackage/iwl4965 + $(call KernelPackage/mac80211/Default) + DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT +iwl4965-firmware + TITLE:=Intel iwl4965 Wireless support + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl4965.ko + AUTOLOAD:=$(call AutoProbe,iwl4965) +endef + +define KernelPackage/iwl4965/description + iwl4965 kernel module for Intel 4965 support +endef + + +define KernelPackage/libipw + $(call KernelPackage/mac80211/Default) + TITLE:=libipw for ipw2100 and ipw2200 + DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-crypto-ecb +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN @!LINUX_3_18 + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/libipw.ko + AUTOLOAD:=$(call AutoProbe,libipw) +endef + +define KernelPackage/libipw/description + Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200. +endef + +IPW2100_NAME:=ipw2100-fw +IPW2100_VERSION:=1.3 + +define Download/ipw2100 + URL:= \ + https://src.fedoraproject.org/repo/pkgs/ipw2100-firmware/ipw2100-fw-1.3.tgz/46aa75bcda1a00efa841f9707bbbd113/ \ + https://archlinux.mirror.pkern.at/other/packages/ipw2100-fw/ \ + http://mirror.ox.ac.uk/sites/ftp.openbsd.org/pub/OpenBSD/distfiles/firmware/ \ + http://firmware.openbsd.org/firmware-dist/ + FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz + HASH:=e1107c455e48d324a616b47a622593bc8413dcce72026f72731c0b03dae3a7a2 +endef +$(eval $(call Download,ipw2100)) + +define KernelPackage/ipw2100 + $(call KernelPackage/mac80211/Default) + TITLE:=Intel IPW2100 driver + DEPENDS:=@PCI_SUPPORT +kmod-libipw + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2100.ko + AUTOLOAD:=$(call AutoProbe,ipw2100) +endef + +define KernelPackage/ipw2100/description + Kernel support for Intel IPW2100 + Includes: + - ipw2100 +endef + +IPW2200_NAME:=ipw2200-fw +IPW2200_VERSION:=3.1 + +define Download/ipw2200 + URL:= \ + https://src.fedoraproject.org/repo/pkgs/ipw2200-firmware/ipw2200-fw-3.1.tgz/eaba788643c7cc7483dd67ace70f6e99/ \ + https://archlinux.mirror.pkern.at/other/packages/ipw2200-fw/ \ + http://mirror.ox.ac.uk/sites/ftp.openbsd.org/pub/OpenBSD/distfiles/firmware/ \ + http://firmware.openbsd.org/firmware-dist/ + FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz + HASH:=c6818c11c18cc030d55ff83f64b2bad8feef485e7742f84f94a61d811a6258bd +endef +$(eval $(call Download,ipw2200)) + +define KernelPackage/ipw2200 + $(call KernelPackage/mac80211/Default) + TITLE:=Intel IPW2200 driver + DEPENDS:=@PCI_SUPPORT +kmod-libipw + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2200.ko + AUTOLOAD:=$(call AutoProbe,ipw2200) +endef + +define KernelPackage/ipw2200/description + Kernel support for Intel IPW2200 + Includes: + - ipw2200 +endef + +define KernelPackage/ipw2100/install + $(INSTALL_DIR) $(1)/lib/firmware + $(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware +endef + +define KernelPackage/ipw2200/install + $(INSTALL_DIR) $(1)/lib/firmware + $(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware +endef diff --git a/package/kernel/mac80211/marvell.mk b/package/kernel/mac80211/marvell.mk new file mode 100644 index 000000000..4e2f925b7 --- /dev/null +++ b/package/kernel/mac80211/marvell.mk @@ -0,0 +1,90 @@ +PKG_DRIVERS += \ + libertas-sdio libertas-usb libertas-spi \ + mwl8k mwifiex-pcie mwifiex-sdio + +config-$(call config_package,libertas-sdio) += LIBERTAS LIBERTAS_SDIO +config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB +config-$(call config_package,libertas-spi) += LIBERTAS LIBERTAS_SPI +config-$(call config_package,mwl8k) += MWL8K +config-$(call config_package,mwifiex-pcie) += MWIFIEX MWIFIEX_PCIE +config-$(call config_package,mwifiex-sdio) += MWIFIEX MWIFIEX_SDIO + +define KernelPackage/libertas-usb + $(call KernelPackage/mac80211/Default) + DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-usb-firmware @!LINUX_3_18 + TITLE:=Marvell 88W8015 Wireless Driver + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/usb8xxx.ko + AUTOLOAD:=$(call AutoProbe,libertas usb8xxx) +endef + +define KernelPackage/libertas-sdio + $(call KernelPackage/mac80211/Default) + DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware @!LINUX_3_18 + TITLE:=Marvell 88W8686 Wireless Driver + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_sdio.ko + AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio) +endef + +define KernelPackage/libertas-spi + $(call KernelPackage/mac80211/Default) + SUBMENU:=Wireless Drivers + DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-spi-firmware @!LINUX_3_18 + KCONFIG := \ + CONFIG_SPI=y \ + CONFIG_SPI_MASTER=y + TITLE:=Marvell 88W8686 SPI Wireless Driver + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_spi.ko + AUTOLOAD:=$(call AutoProbe,libertas libertas_spi) +endef + + +define KernelPackage/mwl8k + $(call KernelPackage/mac80211/Default) + TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards + URL:=https://wireless.wiki.kernel.org/en/users/drivers/mwl8k + DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwl8k-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwl8k.ko + AUTOLOAD:=$(call AutoProbe,mwl8k) +endef + +define KernelPackage/mwl8k/description + Kernel modules for Marvell TOPDOG 802.11 Wireless cards +endef + + +define KernelPackage/mwifiex-pcie + $(call KernelPackage/mac80211/Default) + TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards + URL:=https://wireless.wiki.kernel.org/en/users/drivers/mwifiex + DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-pcie-firmware + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_pcie.ko + AUTOLOAD:=$(call AutoProbe,mwifiex_pcie) +endef + +define KernelPackage/mwifiex-pcie/description + Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards +endef + +define KernelPackage/mwifiex-sdio + $(call KernelPackage/mac80211/Default) + TITLE:=Driver for Marvell 802.11n/802.11ac SDIO Wireless cards + URL:=https://wireless.wiki.kernel.org/en/users/drivers/mwifiex + DEPENDS+= +kmod-mmc +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-sdio-firmware + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_sdio.ko + AUTOLOAD:=$(call AutoProbe,mwifiex_sdio) +endef + +define KernelPackage/mwifiex-sdio/description + Kernel modules for Marvell 802.11n/802.11ac SDIO Wireless cards +endef + diff --git a/package/kernel/mac80211/patches/build/015-ipw200-mtu.patch b/package/kernel/mac80211/patches/build/015-ipw200-mtu.patch new file mode 100644 index 000000000..d57d821fe --- /dev/null +++ b/package/kernel/mac80211/patches/build/015-ipw200-mtu.patch @@ -0,0 +1,34 @@ +--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c ++++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c +@@ -11498,6 +11498,15 @@ static const struct attribute_group ipw_ + .attrs = ipw_sysfs_entries, + }; + ++#if LINUX_VERSION_IS_LESS(4,10,0) ++static int __change_mtu(struct net_device *ndev, int new_mtu){ ++ if (new_mtu < 68 || new_mtu > LIBIPW_DATA_LEN) ++ return -EINVAL; ++ ndev->mtu = new_mtu; ++ return 0; ++} ++#endif ++ + #ifdef CPTCFG_IPW2200_PROMISCUOUS + static int ipw_prom_open(struct net_device *dev) + { +@@ -11546,15 +11555,6 @@ static netdev_tx_t ipw_prom_hard_start_x + return NETDEV_TX_OK; + } + +-#if LINUX_VERSION_IS_LESS(4,10,0) +-static int __change_mtu(struct net_device *ndev, int new_mtu){ +- if (new_mtu < 68 || new_mtu > LIBIPW_DATA_LEN) +- return -EINVAL; +- ndev->mtu = new_mtu; +- return 0; +-} +-#endif +- + static const struct net_device_ops ipw_prom_netdev_ops = { + #if LINUX_VERSION_IS_LESS(4,10,0) + .ndo_change_mtu = __change_mtu, diff --git a/package/kernel/mac80211/ralink.mk b/package/kernel/mac80211/ralink.mk new file mode 100644 index 000000000..e4eca6e9b --- /dev/null +++ b/package/kernel/mac80211/ralink.mk @@ -0,0 +1,172 @@ +PKG_DRIVERS += \ + rt2x00-lib rt2x00-pci rt2x00-usb rt2x00-mmio \ + rt2400-pci rt2500-pci rt2500-usb \ + rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \ + rt61-pci rt73-usb + +PKG_CONFIG_DEPENDS += \ + CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS \ + CONFIG_PACKAGE_RT2X00_DEBUG + +config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB +config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI +config-$(call config_package,rt2x00-mmio) += RT2X00_LIB_MMIO +config-$(call config_package,rt2x00-usb) += RT2X00_LIB_USB +config-$(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS) += RT2X00_LIB_DEBUGFS +config-$(CONFIG_PACKAGE_RT2X00_DEBUG) += RT2X00_DEBUG + +config-$(call config_package,rt2400-pci) += RT2400PCI +config-$(call config_package,rt2500-pci) += RT2500PCI +config-$(call config_package,rt2500-usb) += RT2500USB +config-$(call config_package,rt61-pci) += RT61PCI +config-$(call config_package,rt73-usb) += RT73USB + +config-$(call config_package,rt2800-lib) += RT2800_LIB + +config-$(call config_package,rt2800-soc) += RT2800SOC +config-$(call config_package,rt2800-pci) += RT2800PCI +config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290 + +config-$(call config_package,rt2800-usb) += RT2800USB +config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX RT2800USB_UNKNOWN + +define KernelPackage/rt2x00/Default + $(call KernelPackage/mac80211/Default) + TITLE:=Ralink Drivers for RT2x00 cards +endef + +define KernelPackage/rt2x00-lib +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t + TITLE+= (LIB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko + MENU:=1 +endef + +define KernelPackage/rt2x00-lib/config + if PACKAGE_kmod-rt2x00-lib + + config PACKAGE_RT2X00_LIB_DEBUGFS + bool "Enable rt2x00 debugfs support" + depends on PACKAGE_MAC80211_DEBUGFS + help + Enable creation of debugfs files for the rt2x00 drivers. + These debugfs files support both reading and writing of the + most important register types of the rt2x00 hardware. + + config PACKAGE_RT2X00_DEBUG + bool "Enable rt2x00 debug output" + help + Enable debugging output for all rt2x00 modules + + endif +endef + +define KernelPackage/rt2x00-mmio +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6 + HIDDEN:=1 + TITLE+= (MMIO) + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko +endef + +define KernelPackage/rt2x00-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib + HIDDEN:=1 + TITLE+= (PCI) + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko + AUTOLOAD:=$(call AutoProbe,rt2x00pci) +endef + +define KernelPackage/rt2x00-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core + HIDDEN:=1 + TITLE+= (USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko + AUTOLOAD:=$(call AutoProbe,rt2x00usb) +endef + +define KernelPackage/rt2800-lib +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT + HIDDEN:=1 + TITLE+= (rt2800 LIB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko +endef + +define KernelPackage/rt2400-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci + TITLE+= (RT2400 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2400pci.ko + AUTOLOAD:=$(call AutoProbe,rt2400pci) +endef + +define KernelPackage/rt2500-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci + TITLE+= (RT2500 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500pci.ko + AUTOLOAD:=$(call AutoProbe,rt2500pci) +endef + +define KernelPackage/rt2500-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb + TITLE+= (RT2500 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500usb.ko + AUTOLOAD:=$(call AutoProbe,rt2500usb) +endef + +define KernelPackage/rt2800-mmio +$(call KernelPackage/rt2x00/Default) + TITLE += (RT28xx/RT3xxx MMIO) + DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio + HIDDEN:=1 + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko +endef + +define KernelPackage/rt2800-soc +$(call KernelPackage/rt2x00/Default) + DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib + TITLE += (RT28xx/RT3xxx SoC) + FILES := \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00soc.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800soc.ko + AUTOLOAD:=$(call AutoProbe,rt2800soc) +endef + +define KernelPackage/rt2800-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio +rt2800-pci-firmware + TITLE+= (RT2860 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko + AUTOLOAD:=$(call AutoProbe,rt2800pci) +endef + +define KernelPackage/rt2800-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt +rt2800-usb-firmware + TITLE+= (RT2870 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko + AUTOLOAD:=$(call AutoProbe,rt2800usb) +endef + + +define KernelPackage/rt61-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +rt61-pci-firmware + TITLE+= (RT2x61 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko + AUTOLOAD:=$(call AutoProbe,rt61pci) +endef + +define KernelPackage/rt73-usb + $(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +rt73-usb-firmware + TITLE+= (RT73 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko + AUTOLOAD:=$(call AutoProbe,rt73usb) +endef diff --git a/package/kernel/mac80211/realtek.mk b/package/kernel/mac80211/realtek.mk new file mode 100644 index 000000000..b9a01e563 --- /dev/null +++ b/package/kernel/mac80211/realtek.mk @@ -0,0 +1,170 @@ +PKG_DRIVERS += \ + rtl8180 rtl8187 \ + rtlwifi rtlwifi-pci rtlwifi-btcoexist rtlwifi-usb rtl8192c-common \ + rtl8192ce rtl8192se rtl8192de rtl8192cu rtl8821ae \ + rtl8xxxu + +config-$(call config_package,rtl8180) += RTL8180 +config-$(call config_package,rtl8187) += RTL8187 + +config-$(call config_package,rtlwifi) += RTL_CARDS RTLWIFI +config-$(call config_package,rtlwifi-pci) += RTLWIFI_PCI +config-$(call config_package,rtlwifi-btcoexist) += RTLBTCOEXIST +config-$(call config_package,rtlwifi-usb) += RTLWIFI_USB +config-$(call config_package,rtl8192c-common) += RTL8192C_COMMON +config-$(call config_package,rtl8192ce) += RTL8192CE +config-$(call config_package,rtl8192se) += RTL8192SE +config-$(call config_package,rtl8192de) += RTL8192DE +config-$(call config_package,rtl8192cu) += RTL8192CU +config-$(call config_package,rtl8821ae) += RTL8821AE +config-$(CONFIG_PACKAGE_RTLWIFI_DEBUG) += RTLWIFI_DEBUG + +config-$(call config_package,rtl8xxxu) += RTL8XXXU +config-y += RTL8XXXU_UNTESTED + +define KernelPackage/rtl818x/Default + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek Drivers for RTL818x devices + URL:=https://wireless.wiki.kernel.org/en/users/drivers/rtl8187 + DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211 +endef + +define KernelPackage/rtl8180 + $(call KernelPackage/rtl818x/Default) + DEPENDS+= @PCI_SUPPORT + TITLE+= (RTL8180 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl818x_pci.ko + AUTOLOAD:=$(call AutoProbe,rtl818x_pci) +endef + +define KernelPackage/rtl8187 +$(call KernelPackage/rtl818x/Default) + DEPENDS+= @USB_SUPPORT +kmod-usb-core + TITLE+= (RTL8187 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.ko + AUTOLOAD:=$(call AutoProbe,rtl8187) +endef + +define KernelPackage/rtlwifi/config + config PACKAGE_RTLWIFI_DEBUG + bool "Realtek wireless debugging" + depends on PACKAGE_kmod-rtlwifi + help + Say Y, if you want to debug realtek wireless drivers. + +endef + +define KernelPackage/rtlwifi + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek common driver part + DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtlwifi.ko + HIDDEN:=1 +endef + +define KernelPackage/rtlwifi-pci + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek common driver part (PCI support) + DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_pci.ko + AUTOLOAD:=$(call AutoProbe,rtl_pci) + HIDDEN:=1 +endef + +define KernelPackage/rtlwifi-btcoexist + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek BT coexist support + DEPENDS+= +kmod-rtlwifi + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/btcoexist/btcoexist.ko + AUTOLOAD:=$(call AutoProbe,btcoexist) + HIDDEN:=1 +endef + +define KernelPackage/rtlwifi-usb + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek common driver part (USB support) + DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_usb.ko + AUTOLOAD:=$(call AutoProbe,rtl_usb) + HIDDEN:=1 +endef + +define KernelPackage/rtl8192c-common + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8192CE/RTL8192CU common support module + DEPENDS+= +kmod-rtlwifi + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192c/rtl8192c-common.ko + HIDDEN:=1 +endef + +define KernelPackage/rtl8192ce + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8192CE/RTL8188CE support + DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common +rtl8192ce-firmware + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rtl8192ce.ko + AUTOLOAD:=$(call AutoProbe,rtl8192ce) +endef + +define KernelPackage/rtl8192se + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8192SE/RTL8191SE support + DEPENDS+= +kmod-rtlwifi-pci +rtl8192se-firmware + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rtl8192se.ko + AUTOLOAD:=$(call AutoProbe,rtl8192se) +endef + +define KernelPackage/rtl8192de + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8192DE/RTL8188DE support + DEPENDS+= +kmod-rtlwifi-pci +rtl8192de-firmware + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rtl8192de.ko + AUTOLOAD:=$(call AutoProbe,rtl8192de) +endef + +define KernelPackage/rtl8192cu + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8192CU/RTL8188CU support + DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common +rtl8192cu-firmware + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rtl8192cu.ko + AUTOLOAD:=$(call AutoProbe,rtl8192cu) +endef + +define KernelPackage/rtl8821ae + $(call KernelPackage/mac80211/Default) + TITLE:=Realtek RTL8821AE support + DEPENDS+= +kmod-rtlwifi-btcoexist +kmod-rtlwifi-pci +rtl8821ae-firmware + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rtl8821ae.ko + AUTOLOAD:=$(call AutoProbe,rtl8821ae) +endef + +define KernelPackage/rtl8xxxu + $(call KernelPackage/mac80211/Default) + TITLE:=alternative Realtek RTL8XXXU support + DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211 + FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko + AUTOLOAD:=$(call AutoProbe,rtl8xxxu) +endef + +define KernelPackage/rtl8xxxu/description + This is an alternative driver for various Realtek RTL8XXX + parts written to utilize the Linux mac80211 stack. + The driver is known to work with a number of RTL8723AU, + RL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU devices + + This driver is under development and has a limited feature + set. In particular it does not yet support 40MHz channels + and power management. However it should have a smaller + memory footprint than the vendor drivers and benetifs + from the in kernel mac80211 stack. + + It can coexist with drivers from drivers/staging/rtl8723au, + drivers/staging/rtl8192u, and drivers/net/wireless/rtlwifi, + but you will need to control which module you wish to load. + + RTL8XXXU_UNTESTED is enabled + This option enables detection of Realtek 8723/8188/8191/8192 WiFi + USB devices which have not been tested directly by the driver + author or reported to be working by third parties. + + Please report your results! +endef