build: add a script for generating Linksys EA6350v3 factory image

include/image-commands.mk

@@ -274,6 +274,13 @@ define Build/combined-image
 	@mv $@.new $@
 endef
 
+define Build/linksys-image
+	$(TOPDIR)/scripts/linksys-image.sh \
+		"$(call param_get_default,type,$(1),$(DEVICE_NAME))" \
+		$@ $@.new
+		mv $@.new $@
+endef
+
 define Build/openmesh-image
 	$(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
 		"$(call param_get_default,ce_type,$(1),$(DEVICE_NAME))" \

scripts/linksys-image.sh

@@ -0,0 +1,67 @@
+#!/bin/sh
+#
+# Copyright (C) 2018 Oceanic Systems (UK) Ltd
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# Maintained by: Ryan Pannell <ryan [at] o s u k l .com> <github.com/Escalion>
+#
+# Write Linksys signature for factory image
+# This is appended to the factory image and is tested by the Linksys Upgrader - as observed in civic.
+# The footer is 256 bytes. The format is:
+#  .LINKSYS.        This is detected by the Linksys upgrader before continuing with upgrade. (9 bytes)
+#  <VERSION>        The version number of upgrade. Not checked so use arbitary value (8 bytes)
+#  <TYPE>           Model of target device, padded (0x20) to (15 bytes)
+#  <CRC>      	    CRC checksum of the image to flash (8 byte)
+#  <padding>	    Padding (0x20) (7 bytes)
+#  <signature>	    Signature of signer. Not checked so use Arbitary value (16 bytes)
+#  <padding>        Padding (0x00) (192 bytes)
+#  0x0A		    (1 byte)
+
+## version history
+# * version 1: initial commit
+
+set -e
+
+ME="${0##*/}"
+
+usage() {
+	echo "Usage: $ME <type> <in filename>"
+	[ "$IMG_OUT" ] && rm -f "$IMG_OUT"
+	exit 1
+}
+
+[ "$#" -lt 3 ] && usage
+
+TYPE=$1
+
+tmpdir="$( mktemp -d 2> /dev/null )"
+if [ -z "$tmpdir" ]; then
+	# try OSX signature
+	tmpdir="$( mktemp -t 'ubitmp' -d )"
+fi
+
+if [ -z "$tmpdir" ]; then
+	exit 1
+fi
+
+trap "rm -rf $tmpdir" EXIT
+
+IMG_TMP_OUT="${tmpdir}/out"
+
+IMG_IN=$2
+IMG_OUT="${IMG_IN}.new"
+
+[ ! -f "$IMG_IN" ] && echo "$ME: Not a valid image: $IMG_IN" && usage
+
+dd if="${IMG_IN}" of="${IMG_TMP_OUT}"
+CRC=$(printf "%08X" $(dd if="${IMG_IN}" bs=$(stat -c%s "${IMG_IN}") count=1|cksum| cut -d ' ' -f1))
+
+printf ".LINKSYS.01000409%-15s%-8s%-7s%-16s" "${TYPE}" "${CRC}" "" "K0000000F0246434" >> "${IMG_TMP_OUT}"
+
+dd if=/dev/zero bs=1 count=192 conv=notrunc >> "${IMG_TMP_OUT}"
+
+printf '\12' >> "${IMG_TMP_OUT}"
+
+cp "${IMG_TMP_OUT}" "${IMG_OUT}"

target/linux/ipq40xx/Makefile

@@ -17,7 +17,7 @@ include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += \
 	kmod-usb-dwc3-of-simple \
 	kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
-	kmod-ath10k-ct wpad-basic \
-	kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct
+	kmod-ath10k wpad \
+	kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019
 
 $(eval $(call BuildTarget))