sunxi: add kernel 6.1 support

2025-04-16 04:13:31 +00:00 · 2024-03-09 21:01:07 +08:00 · 2024-03-09 21:01:07 +08:00 · 525b77c08b
commit 525b77c08b
parent 6b306de18b
45 changed files with 940 additions and 2145 deletions
--- a/target/linux/sunxi/Makefile
+++ b/target/linux/sunxi/Makefile
@ -6,12 +6,11 @@ include $(TOPDIR)/rules.mk

 ARCH:=arm
 BOARD:=sunxi
-BOARDNAME:=Allwinner A1x/A20/A3x/H3/H5/R40
+BOARDNAME:=Allwinner ARM SoCs
 FEATURES:=fpu usb ext4 display rootfs-part rtc squashfs
 SUBTARGETS:=cortexa8 cortexa7 cortexa53

-KERNEL_PATCHVER:=5.10
-KERNEL_TESTING_PATCHVER:=5.4
+KERNEL_PATCHVER:=6.1

 KERNELNAME:=zImage dtbs

@ -22,6 +21,7 @@ KERNELNAME:=zImage dtbs
 # A80: octa Cortex-A15/A7
 # H3: quad Cortex-A7
 # R40: quad Cortex-A7
+# A64/H5/H6/H616: quad Cortex-A53

 include $(INCLUDE_DIR)/target.mk

--- a/target/linux/sunxi/base-files/etc/board.d/01_leds
+++ b/target/linux/sunxi/base-files/etc/board.d/01_leds
@ -7,9 +7,10 @@ boardname="${board##*,}"
 board_config_update

 case $board in
-friendlyarm,nanopi-r1)
-	ucidef_set_led_netdev "wan" "WAN" "nanopi:green:wan" "eth0"
-	ucidef_set_led_netdev "lan" "LAN" "nanopi:green:lan" "eth1"
+friendlyarm,nanopi-r1|\
+friendlyarm,nanopi-r1s-h5)
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
+	ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth1"
 	;;
 esac

--- a/target/linux/sunxi/base-files/etc/board.d/02_network
+++ b/target/linux/sunxi/base-files/etc/board.d/02_network
@ -3,28 +3,79 @@
 #

 . /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh

-board_config_update
+sunxi_setup_interfaces()
+{
+	local board="$1"

-case $(board_name) in
-friendlyarm,nanopi-r1)
+	case "$board" in
+	friendlyarm,nanopi-r1|\
+	friendlyarm,nanopi-r1s-h5)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
-lamobo,lamobo-r1)
-	ucidef_add_switch "switch0" \
-		"4:lan:1" "0:lan:2" "1:lan:3" "2:lan:4" "3:wan" "8@eth0"
+	lamobo,lamobo-r1)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
 		;;
-olimex,a20-olinuxino-micro)
+	olimex,a20-olinuxino-micro)
 		ucidef_set_interface_lan "wlan0"
 		;;
-xunlong,orangepi-r1)
+	xunlong,orangepi-r1)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
-*)
+	*)
 		ucidef_set_interface_lan "eth0"
 		;;
-esac
+	esac
+}

+nanopi_r1_get_mac()
+{
+	local interface=$1
+	local eeprom_path="/sys/bus/i2c/devices/2-0051/eeprom"
+	local address
+
+	if [ -f "$eeprom_path" ]; then
+		address=$(get_mac_binary "$eeprom_path" 0xfa)
+		if [ "$interface" = "lan" ]; then
+			address=$(macaddr_setbit_la "$address")
+		fi
+	else
+		address=$(macaddr_generate_from_mmc_cid mmcblk1)
+		if [ "$interface" = "lan" ]; then
+			address=$(macaddr_add "$address" 1)
+		fi
+	fi
+
+	echo "$address"
+}
+
+sunxi_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case "$board" in
+	friendlyarm,nanopi-r1)
+		wan_mac=$(nanopi_r1_get_mac wan)
+		lan_mac=$(nanopi_r1_get_mac lan)
+		;;
+	friendlyarm,nanopi-r1s-h5)
+		lan_mac=$(get_mac_binary "/sys/bus/i2c/devices/0-0051/eeprom" 0xfa)
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+sunxi_setup_interfaces $board
+sunxi_setup_macs $board
 board_config_flush

 exit 0
--- a/target/linux/sunxi/base-files/etc/board.d/05_compat-version
+++ b/target/linux/sunxi/base-files/etc/board.d/05_compat-version
@ -0,0 +1,15 @@
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	lamobo,lamobo-r1)
+		ucidef_set_compat_version "1.1"
+		;;
+esac
+
+board_config_flush
+
+exit 0
--- a/target/linux/sunxi/base-files/lib/preinit/03_b53_hack.sh
+++ b/target/linux/sunxi/base-files/lib/preinit/03_b53_hack.sh
@ -1,16 +0,0 @@
-do_b53_hack() {
-	. /lib/functions.sh
-
-	# hack: enable switch on Lamobo R1 and reset counters
-	case $(board_name) in
-	lamobo,lamobo-r1)
-		ip link set eth0 up
-		sleep 1
-		swconfig dev switch0 set reset 1
-		swconfig dev switch0 set reset_mib 1
-		swconfig dev switch0 set apply 1
-		;;
-	esac
-}
-
-boot_hook_add preinit_main do_b53_hack
--- a/target/linux/sunxi/config-5.4
+++ b/target/linux/sunxi/config-5.4
@ -1,586 +0,0 @@
-# CONFIG_AHCI_SUNXI is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_KEEPINITRD=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=416
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_SUNXI_MC_SMP=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CCI=y
-CONFIG_ARM_CCI400_COMMON=y
-CONFIG_ARM_CCI400_PORT_CTRL=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PMU=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_AXP20X_POWER=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CAN=y
-CONFIG_CC_HAS_KASAN_GENERIC=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLK_SUNXI=y
-CONFIG_CLK_SUNXI_CLOCKS=y
-CONFIG_CLK_SUNXI_PRCM_SUN6I=y
-CONFIG_CLK_SUNXI_PRCM_SUN8I=y
-CONFIG_CLK_SUNXI_PRCM_SUN9I=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONNECTOR=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_SUN4I_SS=y
-CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SUN4I=y
-CONFIG_DMA_SUN6I=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DWMAC_GENERIC=y
-# CONFIG_DWMAC_SUN8I is not set
-CONFIG_DWMAC_SUNXI=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_LITTLE_ENDIAN=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SIMPLE=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FAST_GUP=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
-CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_IRQFD=y
-CONFIG_HAVE_KVM_IRQ_BYPASS=y
-CONFIG_HAVE_KVM_IRQ_ROUTING=y
-CONFIG_HAVE_KVM_MSI=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PCI=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_SUN6I_P2WI=y
-CONFIG_IIO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_AXP20X_PEK=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_BYPASS_MANAGER=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KEYBOARD_SUN4I_LRADC=y
-CONFIG_KSM=y
-CONFIG_KVM=y
-CONFIG_KVM_ARM_HOST=y
-CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_VFIO=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_MACH_SUN4I=y
-CONFIG_MACH_SUN5I=y
-CONFIG_MACH_SUN6I=y
-CONFIG_MACH_SUN7I=y
-CONFIG_MACH_SUN8I=y
-CONFIG_MACH_SUN9I=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_SUN4I=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_AXP20X=y
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X_RSB=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SUN6I_PRCM=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SUNXI=y
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=8
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SUNXI_SID=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_SUN4I_USB=y
-# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
-CONFIG_PHY_SUN9I_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AXP209=y
-CONFIG_PINCTRL_SUN4I_A10=y
-CONFIG_PINCTRL_SUN5I=y
-CONFIG_PINCTRL_SUN6I_A31=y
-CONFIG_PINCTRL_SUN6I_A31_R=y
-CONFIG_PINCTRL_SUN8I_A23=y
-CONFIG_PINCTRL_SUN8I_A23_R=y
-CONFIG_PINCTRL_SUN8I_A33=y
-CONFIG_PINCTRL_SUN8I_A83T=y
-CONFIG_PINCTRL_SUN8I_A83T_R=y
-CONFIG_PINCTRL_SUN8I_H3=y
-CONFIG_PINCTRL_SUN8I_H3_R=y
-CONFIG_PINCTRL_SUN8I_V3S=y
-CONFIG_PINCTRL_SUN9I_A80=y
-CONFIG_PINCTRL_SUN9I_A80_R=y
-CONFIG_PINCTRL_SUNXI=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_COUNT=y
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_SUN4I=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_SY8106A=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_SIMPLE=y
-CONFIG_RESET_SUNXI=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SDIO_UART=y
-CONFIG_SECURITYFS=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SND=y
-CONFIG_SND_COMPRESS_OFFLOAD=y
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-CONFIG_SND_PCM=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SUN4I_I2S is not set
-# CONFIG_SND_SUN4I_SPDIF is not set
-# CONFIG_SND_SUN8I_CODEC is not set
-# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_SUN4I=y
-CONFIG_SPI_SUN6I=y
-CONFIG_SRCU=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_SELFTESTS is not set
-CONFIG_SUN4I_A10_CCU=y
-# CONFIG_SUN4I_EMAC is not set
-CONFIG_SUN4I_TIMER=y
-CONFIG_SUN5I_CCU=y
-CONFIG_SUN5I_HSTIMER=y
-CONFIG_SUN6I_A31_CCU=y
-CONFIG_SUN8I_A23_CCU=y
-CONFIG_SUN8I_A33_CCU=y
-CONFIG_SUN8I_A83T_CCU=y
-CONFIG_SUN8I_DE2_CCU=y
-CONFIG_SUN8I_H3_CCU=y
-CONFIG_SUN8I_R40_CCU=y
-CONFIG_SUN8I_R_CCU=y
-CONFIG_SUN8I_V3S_CCU=y
-CONFIG_SUN9I_A80_CCU=y
-CONFIG_SUNXI_CCU=y
-CONFIG_SUNXI_RSB=y
-CONFIG_SUNXI_SRAM=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_TASKS_RCU=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TOUCHSCREEN_PROPERTIES=y
-CONFIG_TOUCHSCREEN_SUN4I=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USERIO=y
-CONFIG_USE_OF=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VHOST=y
-CONFIG_VHOST_NET=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
--- a/target/linux/sunxi/config-5.10
+++ b/target/linux/sunxi/config-5.10
@ -2,6 +2,7 @@
 CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ARCH_32BIT_OFF_T=y
 CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_FORCE_MAX_ORDER=11
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_KEEP_MEMBLOCK=y
 CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
@ -17,7 +18,7 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_SUNXI_MC_SMP=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARM=y
-# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set
+CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ARCH_TIMER=y
 CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
@ -52,11 +53,9 @@ CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
 CONFIG_BOUNCE=y
 CONFIG_CACHE_L2X0=y
 CONFIG_CAN=y
-CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLKSRC_MMIO=y
 CONFIG_CLK_SUNXI=y
 CONFIG_CLK_SUNXI_CLOCKS=y
@ -92,6 +91,7 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_PABRT_V7=y
 CONFIG_CPU_PM=y
 CONFIG_CPU_RMAP=y
@ -109,6 +109,7 @@ CONFIG_CRYPTO_CRCT10DIF_ARM_CE=y
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_DEV_ALLWINNER=y
 CONFIG_CRYPTO_DEV_SUN4I_SS=y
+# CONFIG_CRYPTO_DEV_SUN4I_SS_DEBUG is not set
 CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
 # CONFIG_CRYPTO_DEV_SUN8I_CE is not set
 # CONFIG_CRYPTO_DEV_SUN8I_SS is not set
@ -141,7 +142,6 @@ CONFIG_DYNAMIC_DEBUG=y
 CONFIG_EDAC_ATOMIC_SCRUB=y
 CONFIG_EDAC_SUPPORT=y
 CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_EXT4_FS=y
 CONFIG_EXTCON=y
 CONFIG_F2FS_FS=y
@ -164,10 +164,12 @@ CONFIG_FONT_SUPPORT=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FRAME_WARN=2048
 CONFIG_FREEZER=y
 CONFIG_FS_IOMAP=y
 CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FWNODE_MDIO=y
 CONFIG_FW_CACHE=y
 CONFIG_FW_LOADER_PAGED_BUF=y
 CONFIG_GENERIC_ALLOCATOR=y
@ -176,6 +178,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
 CONFIG_GENERIC_EARLY_IOREMAP=y
 CONFIG_GENERIC_GETTIMEOFDAY=y
 CONFIG_GENERIC_IDLE_POLL_SETUP=y
@ -185,6 +188,7 @@ CONFIG_GENERIC_IRQ_MIGRATION=y
 CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
 CONFIG_GENERIC_IRQ_SHOW=y
 CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
 CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_GENERIC_PHY=y
 CONFIG_GENERIC_PINCONF=y
@ -197,6 +201,7 @@ CONFIG_GENERIC_STRNLEN_USER=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_VDSO_32=y
 CONFIG_GLOB=y
+CONFIG_GPIO_CDEV=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDEN_BRANCH_PREDICTOR=y
 CONFIG_HARDIRQS_SW_RESEND=y
@ -232,11 +237,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_IRQCHIP=y
 CONFIG_IRQ_DOMAIN=y
 CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_WORK=y
 CONFIG_JBD2=y
 CONFIG_KALLSYMS=y
 CONFIG_KEYBOARD_SUN4I_LRADC=y
+CONFIG_KMAP_LOCAL=y
+CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
 CONFIG_KSM=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
@ -290,6 +298,7 @@ CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEON=y
 CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SELFTESTS=y
 CONFIG_NET_VENDOR_ALLWINNER=y
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=y
@ -300,6 +309,7 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_NR_CPUS=8
 CONFIG_NVMEM=y
 CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_NVMEM_SYSFS=y
 CONFIG_OF=y
 CONFIG_OF_ADDRESS=y
 CONFIG_OF_EARLY_FLATTREE=y
@ -308,7 +318,6 @@ CONFIG_OF_GPIO=y
 CONFIG_OF_IRQ=y
 CONFIG_OF_KOBJ=y
 CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
 CONFIG_OLD_SIGACTION=y
 CONFIG_OLD_SIGSUSPEND3=y
 CONFIG_OUTER_CACHE=y
@ -328,6 +337,7 @@ CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AXP209=y
+# CONFIG_PINCTRL_SUN20I_D1 is not set
 CONFIG_PINCTRL_SUN4I_A10=y
 # CONFIG_PINCTRL_SUN50I_A100 is not set
 # CONFIG_PINCTRL_SUN50I_A100_R is not set
@ -335,6 +345,8 @@ CONFIG_PINCTRL_SUN4I_A10=y
 # CONFIG_PINCTRL_SUN50I_A64_R is not set
 # CONFIG_PINCTRL_SUN50I_H5 is not set
 # CONFIG_PINCTRL_SUN50I_H6 is not set
+# CONFIG_PINCTRL_SUN50I_H616 is not set
+# CONFIG_PINCTRL_SUN50I_H616_R is not set
 # CONFIG_PINCTRL_SUN50I_H6_R is not set
 CONFIG_PINCTRL_SUN5I=y
 CONFIG_PINCTRL_SUN6I_A31=y
@ -362,6 +374,7 @@ CONFIG_PRINTK_TIME=y
 CONFIG_PROC_EVENTS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_PTP_1588_CLOCK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
 CONFIG_PWM=y
 CONFIG_PWM_SUN4I=y
 CONFIG_PWM_SYSFS=y
@ -387,6 +400,7 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_SATA_HOST=y
 CONFIG_SATA_PMP=y
 CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
 CONFIG_SDIO_UART=y
 CONFIG_SECURITYFS=y
 CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
@ -413,8 +427,10 @@ CONFIG_SND_SOC=y
 CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SUN4I_I2S is not set
 # CONFIG_SND_SUN4I_SPDIF is not set
+# CONFIG_SND_SUN50I_DMIC is not set
 # CONFIG_SND_SUN8I_CODEC is not set
 # CONFIG_SND_SUN8I_CODEC_ANALOG is not set
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
 CONFIG_SPARSE_IRQ=y
@ -426,13 +442,13 @@ CONFIG_SPI_SUN6I=y
 CONFIG_SRCU=y
 CONFIG_STMMAC_ETH=y
 CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STMMAC_SELFTESTS is not set
 CONFIG_SUN4I_A10_CCU=y
 # CONFIG_SUN4I_EMAC is not set
 CONFIG_SUN4I_TIMER=y
 CONFIG_SUN5I_CCU=y
 CONFIG_SUN5I_HSTIMER=y
 CONFIG_SUN6I_A31_CCU=y
+# CONFIG_SUN6I_RTC_CCU is not set
 CONFIG_SUN8I_A23_CCU=y
 CONFIG_SUN8I_A33_CCU=y
 CONFIG_SUN8I_A83T_CCU=y
@ -444,6 +460,7 @@ CONFIG_SUN8I_THERMAL=y
 CONFIG_SUN8I_V3S_CCU=y
 CONFIG_SUN9I_A80_CCU=y
 CONFIG_SUNXI_CCU=y
+CONFIG_SUNXI_MBUS=y
 CONFIG_SUNXI_RSB=y
 CONFIG_SUNXI_SRAM=y
 CONFIG_SUNXI_WATCHDOG=y
@ -454,7 +471,6 @@ CONFIG_SWPHY=y
 CONFIG_SWP_EMULATE=y
 CONFIG_SYSFS_SYSCALL=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
 CONFIG_THERMAL=y
 CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
@ -465,7 +481,6 @@ CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TIMER_OF=y
 CONFIG_TIMER_PROBE=y
 CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TOUCHSCREEN_PROPERTIES=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_TREE_RCU=y
 CONFIG_TREE_SRCU=y
@ -473,7 +488,6 @@ CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
 CONFIG_UNWINDER_ARM=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_COMMON=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_DWC2_HOST=y
--- a/target/linux/sunxi/cortexa53/config-5.4
+++ b/target/linux/sunxi/cortexa53/config-5.4
@ -1,161 +0,0 @@
-CONFIG_64BIT=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
-CONFIG_ARCH_HAS_PTE_DEVMAP=y
-CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_INLINE_READ_LOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK_BH=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_READ_UNLOCK=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_SPIN_LOCK=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_WRITE_LOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_USE_MEMREMAP_PROT=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CONT_SHIFT=4
-CONFIG_ARM64_ERRATUM_1165522=y
-CONFIG_ARM64_ERRATUM_1286807=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_CAVIUM_TX2_ERRATUM_219=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DRM_RCAR_WRITEBACK=y
-CONFIG_DWMAC_SUN8I=y
-CONFIG_EFI_EARLYCON=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FUJITSU_ERRATUM_010001=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_STACKLEAK=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_ASM_MODVERSIONS=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
-CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
-CONFIG_HAVE_GENERIC_VDSO=y
-CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INLINE_READ_LOCK=y
-CONFIG_INLINE_READ_LOCK_BH=y
-CONFIG_INLINE_READ_LOCK_IRQ=y
-CONFIG_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_INLINE_READ_UNLOCK_BH=y
-CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_SPIN_LOCK=y
-CONFIG_INLINE_SPIN_LOCK_BH=y
-CONFIG_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_INLINE_SPIN_TRYLOCK=y
-CONFIG_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_WRITE_LOCK=y
-CONFIG_INLINE_WRITE_LOCK_BH=y
-CONFIG_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_KVM_ARM_PMU=y
-CONFIG_KVM_INDIRECT_VECTORS=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MICREL_PHY=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_PINCTRL_SUN50I_A64=y
-CONFIG_PINCTRL_SUN50I_A64_R=y
-CONFIG_PINCTRL_SUN50I_H5=y
-CONFIG_PINCTRL_SUN50I_H6=y
-CONFIG_PINCTRL_SUN50I_H6_R=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SUN50I_A64_CCU=y
-CONFIG_SUN50I_DE2_BUS=y
-CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
-CONFIG_SUN50I_H6_CCU=y
-CONFIG_SUN50I_H6_R_CCU=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB_MUSB_DUAL_ROLE=y
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_SUNXI=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
--- a/target/linux/sunxi/cortexa53/config-5.10
+++ b/target/linux/sunxi/cortexa53/config-5.10
@ -1,24 +1,27 @@
 CONFIG_64BIT=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
 CONFIG_ARCH_MMAP_RND_BITS=18
 CONFIG_ARCH_MMAP_RND_BITS_MAX=24
 CONFIG_ARCH_MMAP_RND_BITS_MIN=18
 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
 CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
 CONFIG_ARM64=y
 CONFIG_ARM64_4K_PAGES=y
 CONFIG_ARM64_CRYPTO=y
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_ERRATUM_2051678=y
+CONFIG_ARM64_ERRATUM_2077057=y
+CONFIG_ARM64_ERRATUM_2658417=y
+CONFIG_ARM64_ERRATUM_2054223=y
+CONFIG_ARM64_ERRATUM_2067961=y
 CONFIG_ARM64_PAGE_SHIFT=12
 CONFIG_ARM64_PA_BITS=48
 CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PTR_AUTH is not set
-# CONFIG_ARM64_SVE is not set
 CONFIG_ARM64_TAGGED_ADDR_ABI=y
 CONFIG_ARM64_VA_BITS=39
 CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
 CONFIG_ARM_AMBA=y
 CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
 CONFIG_ARM_GIC_V3=y
@ -39,14 +42,13 @@ CONFIG_CRYPTO_SHA1_ARM64_CE=y
 CONFIG_CRYPTO_SIMD=y
 CONFIG_DMA_DIRECT_REMAP=y
 CONFIG_DWMAC_SUN8I=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_EEPROM_AT24=y
 CONFIG_FRAME_POINTER=y
 CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
 CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_MSI_IRQ=y
 CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_HOLES_IN_ZONE=y
 CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
 CONFIG_MDIO_BUS_MUX=y
 CONFIG_MICREL_PHY=y
@ -64,15 +66,18 @@ CONFIG_PINCTRL_SUN50I_A64_R=y
 CONFIG_PINCTRL_SUN50I_H5=y
 CONFIG_PINCTRL_SUN50I_H6=y
 CONFIG_PINCTRL_SUN50I_H6_R=y
+CONFIG_PINCTRL_SUN50I_H616=y
+CONFIG_PINCTRL_SUN50I_H616_R=y
+# CONFIG_PREEMPT_DYNAMIC is not set
 CONFIG_QUEUED_RWLOCKS=y
 CONFIG_QUEUED_SPINLOCKS=y
 CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RTC_DRV_SUN6I=y
+# CONFIG_SCHED_CLUSTER is not set
+# CONFIG_SHADOW_CALL_STACK is not set
 # CONFIG_SND_SUN50I_CODEC_ANALOG is not set
 CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SPARSEMEM=y
 CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SUN50I_A100_CCU=y
@ -80,16 +85,23 @@ CONFIG_SUN50I_A100_R_CCU=y
 CONFIG_SUN50I_A64_CCU=y
 CONFIG_SUN50I_DE2_BUS=y
 CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
+CONFIG_SUN50I_H616_CCU=y
 CONFIG_SUN50I_H6_CCU=y
 CONFIG_SUN50I_H6_R_CCU=y
+# CONFIG_SUN6I_RTC_CCU is not set
 CONFIG_SYSCTL_EXCEPTION_TRACE=y
 CONFIG_THREAD_INFO_IN_TASK=y
 CONFIG_UNMAP_KERNEL_AT_EL0=y
 CONFIG_USB_MUSB_DUAL_ROLE=y
-# CONFIG_USB_MUSB_GADGET is not set
 CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB_PHY=y
 CONFIG_VMAP_STACK=y
 CONFIG_ZONE_DMA32=y
+CONFIG_SURFACE_PLATFORMS=y
+# CONFIG_CRYPTO_POLYVAL_ARM64_CE is not set
+# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set
+# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set
+# CONFIG_PAGE_TABLE_CHECK is not set
+CONFIG_RANDOMIZE_KSTACK_OFFSET=y
+# CONFIG_ARCH_NXP is not set
--- a/target/linux/sunxi/cortexa53/target.mk
+++ b/target/linux/sunxi/cortexa53/target.mk
@ -5,6 +5,6 @@
 include $(TOPDIR)/rules.mk

 ARCH:=aarch64
-BOARDNAME:=Allwinner A64/H5
+BOARDNAME:=Allwinner A64/H5/H6/H616
 CPU_TYPE:=cortex-a53
 KERNELNAME:=Image dtbs
--- a/target/linux/sunxi/cortexa7/config-5.4
+++ b/target/linux/sunxi/cortexa7/config-5.4
@ -1,15 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HAS_BINFMT_FLAT=y
-CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_DWMAC_SUN8I=y
-# CONFIG_MACH_SUN4I is not set
-# CONFIG_MACH_SUN5I is not set
-CONFIG_MDIO_BUS_MUX=y
-# CONFIG_PINCTRL_SUN50I_A64 is not set
-# CONFIG_PINCTRL_SUN50I_A64_R is not set
-# CONFIG_PINCTRL_SUN50I_H5 is not set
-# CONFIG_PINCTRL_SUN50I_H6 is not set
-# CONFIG_PINCTRL_SUN50I_H6_R is not set
-CONFIG_UNWINDER_ARM=y
--- a/target/linux/sunxi/cortexa7/config-5.10
+++ b/target/linux/sunxi/cortexa7/config-5.10
@ -1,6 +1,6 @@
 CONFIG_B53=y
 CONFIG_B53_MDIO_DRIVER=y
-CONFIG_CRYPTO_BLAKE2S=y
+CONFIG_CRYPTO_BLAKE2S_ARM=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_DWMAC_SUN8I=y
 CONFIG_GRO_CELLS=y
@ -19,8 +19,6 @@ CONFIG_NET_SWITCHDEV=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_RTC_DRV_SUN6I=y
 CONFIG_USB_MUSB_DUAL_ROLE=y
-# CONFIG_USB_MUSB_GADGET is not set
 CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB_PHY=y
--- a/target/linux/sunxi/cortexa8/config-5.4
+++ b/target/linux/sunxi/cortexa8/config-5.4
@ -1,20 +0,0 @@
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HAS_BINFMT_FLAT=y
-CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_COMPAT_32BIT_TIME=y
-# CONFIG_MACH_SUN6I is not set
-# CONFIG_MACH_SUN7I is not set
-# CONFIG_MACH_SUN8I is not set
-# CONFIG_MACH_SUN9I is not set
-CONFIG_PGTABLE_LEVELS=2
-# CONFIG_PHY_SUN9I_USB is not set
-# CONFIG_PINCTRL_SUN50I_A64 is not set
-# CONFIG_PINCTRL_SUN50I_A64_R is not set
-# CONFIG_PINCTRL_SUN50I_H5 is not set
-# CONFIG_PINCTRL_SUN50I_H6 is not set
-# CONFIG_PINCTRL_SUN50I_H6_R is not set
-# CONFIG_SPI_SUN6I is not set
-# CONFIG_SUN8I_A83T_CCU is not set
-CONFIG_UNWINDER_ARM=y
--- a/target/linux/sunxi/cortexa8/config-5.10
+++ b/target/linux/sunxi/cortexa8/config-5.10
@ -1,5 +1,5 @@
 # CONFIG_ARM_LPAE is not set
-CONFIG_CRYPTO_BLAKE2S=y
+CONFIG_CRYPTO_BLAKE2S_ARM=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 # CONFIG_MACH_SUN6I is not set
 # CONFIG_MACH_SUN7I is not set
--- a/target/linux/sunxi/image/cortexa53.mk
+++ b/target/linux/sunxi/image/cortexa53.mk
@ -24,6 +24,11 @@ define Device/sun50i-h6
  $(Device/sun50i)
 endef

+define Device/sun50i-h616
+  SOC := sun50i-h616
+  $(Device/sun50i)
+endef
+
 define Device/friendlyarm_nanopi-neo-plus2
  DEVICE_VENDOR := FriendlyARM
  DEVICE_MODEL := NanoPi NEO Plus2
@ -40,6 +45,15 @@ define Device/friendlyarm_nanopi-neo2
 endef
 TARGET_DEVICES += friendlyarm_nanopi-neo2

+define Device/friendlyarm_nanopi-r1s-h5
+  DEVICE_VENDOR := FriendlyARM
+  DEVICE_MODEL := Nanopi R1S H5
+  DEVICE_PACKAGES := kmod-gpio-button-hotplug kmod-usb-net-rtl8152
+  SUPPORTED_DEVICES:=nanopi-r1s-h5
+  $(Device/sun50i-h5)
+endef
+TARGET_DEVICES += friendlyarm_nanopi-r1s-h5
+
 define Device/libretech_all-h3-cc-h5
  DEVICE_VENDOR := Libre Computer
  DEVICE_MODEL := ALL-H3-CC
@ -99,6 +113,13 @@ define Device/xunlong_orangepi-pc2
 endef
 TARGET_DEVICES += xunlong_orangepi-pc2

+define Device/xunlong_orangepi-zero2
+  DEVICE_VENDOR := Xunlong
+  DEVICE_MODEL := Orange Pi Zero 2
+  $(Device/sun50i-h616)
+endef
+TARGET_DEVICES += xunlong_orangepi-zero2
+
 define Device/xunlong_orangepi-zero-plus
  DEVICE_VENDOR := Xunlong
  DEVICE_MODEL := Orange Pi Zero Plus
--- a/target/linux/sunxi/image/cortexa7.mk
+++ b/target/linux/sunxi/image/cortexa7.mk
@ -23,7 +23,7 @@ define Device/friendlyarm_nanopi-m1-plus
  DEVICE_VENDOR := FriendlyARM
  DEVICE_MODEL := NanoPi M1 Plus
  DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
-	cypress-firmware-43430-sdio wpad-basic-wolfssl
+	cypress-firmware-43430-sdio wpad-basic-mbedtls
  SOC := sun8i-h3
 endef
 TARGET_DEVICES += friendlyarm_nanopi-m1-plus
@ -39,7 +39,7 @@ define Device/friendlyarm_nanopi-neo-air
  DEVICE_VENDOR := FriendlyARM
  DEVICE_MODEL := NanoPi NEO Air
  DEVICE_PACKAGES := kmod-leds-gpio kmod-brcmfmac \
-	brcmfmac-firmware-43430a0-sdio wpad-basic-wolfssl
+	brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
  SOC := sun8i-h3
 endef
 TARGET_DEVICES += friendlyarm_nanopi-neo-air
@ -48,7 +48,7 @@ define Device/friendlyarm_nanopi-r1
  DEVICE_VENDOR := FriendlyARM
  DEVICE_MODEL := NanoPi R1
  DEVICE_PACKAGES := kmod-usb-net-rtl8152 kmod-leds-gpio \
-	kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-wolfssl
+	kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-mbedtls
  SOC := sun8i-h3
 endef
 TARGET_DEVICES += friendlyarm_nanopi-r1
@ -64,7 +64,11 @@ TARGET_DEVICES += friendlyarm_zeropi
 define Device/lamobo_lamobo-r1
  DEVICE_VENDOR := Lamobo
  DEVICE_MODEL := Lamobo R1
-  DEVICE_PACKAGES := kmod-ata-sunxi kmod-rtl8192cu wpad-basic-wolfssl
+  DEVICE_ALT0_VENDOR := Bananapi
+  DEVICE_ALT0_MODEL := BPi-R1
+  DEVICE_PACKAGES := kmod-ata-sunxi kmod-rtl8192cu wpad-basic-mbedtls
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
  SOC := sun7i-a20
 endef
 TARGET_DEVICES += lamobo_lamobo-r1
@ -81,7 +85,7 @@ define Device/sinovoip_bananapi-m2-berry
  DEVICE_VENDOR := Sinovoip
  DEVICE_MODEL := Banana Pi M2 Berry
  DEVICE_PACKAGES:=kmod-ata-sunxi kmod-brcmfmac \
-	cypress-firmware-43430-sdio wpad-basic-wolfssl
+	cypress-firmware-43430-sdio wpad-basic-mbedtls
  SUPPORTED_DEVICES:=lemaker,bananapi-m2-berry
  SOC := sun8i-v40
 endef
@ -91,7 +95,7 @@ define Device/sinovoip_bananapi-m2-ultra
  DEVICE_VENDOR := Sinovoip
  DEVICE_MODEL := Banana Pi M2 Ultra
  DEVICE_PACKAGES:=kmod-ata-sunxi kmod-brcmfmac \
-	brcmfmac-firmware-43430a0-sdio wpad-basic-wolfssl
+	brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
  SUPPORTED_DEVICES:=lemaker,bananapi-m2-ultra
  SOC := sun8i-r40
 endef
@ -100,7 +104,8 @@ TARGET_DEVICES += sinovoip_bananapi-m2-ultra
 define Device/lemaker_bananapro
  DEVICE_VENDOR := LeMaker
  DEVICE_MODEL := Banana Pro
-  DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-sunxi kmod-brcmfmac
+  DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-sunxi kmod-brcmfmac \
+	cypress-firmware-43362-sdio wpad-basic-mbedtls
  SOC := sun7i-a20
 endef
 TARGET_DEVICES += lemaker_bananapro
@ -167,11 +172,29 @@ define Device/sinovoip_bananapi-m2-plus
  DEVICE_VENDOR := Sinovoip
  DEVICE_MODEL := Banana Pi M2+
  DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
-	brcmfmac-firmware-43430a0-sdio wpad-basic-wolfssl
+	brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
  SOC := sun8i-h3
 endef
 TARGET_DEVICES += sinovoip_bananapi-m2-plus

+define Device/sinovoip_bananapi-m3
+  DEVICE_VENDOR := Sinovoip
+  DEVICE_MODEL := Banana Pi M3
+  DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-leds-gpio kmod-rtc-ac100 \
+	kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-mbedtls
+  SOC := sun8i-a83t
+endef
+TARGET_DEVICES += sinovoip_bananapi-m3
+
+define Device/sinovoip_bananapi-p2-zero
+  DEVICE_VENDOR := Sinovoip
+  DEVICE_MODEL := Banana Pi P2 Zero
+  DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
+	cypress-firmware-43430-sdio wpad-basic-mbedtls
+  SOC := sun8i-h2-plus
+endef
+TARGET_DEVICES += sinovoip_bananapi-p2-zero
+
 define Device/xunlong_orangepi-one
  DEVICE_VENDOR := Xunlong
  DEVICE_MODEL := Orange Pi One
--- a/target/linux/sunxi/image/cortexa8.mk
+++ b/target/linux/sunxi/image/cortexa8.mk
@ -11,6 +11,16 @@ define Device/cubietech_a10-cubieboard
 endef
 TARGET_DEVICES += cubietech_a10-cubieboard

+define Device/haoyu_a10-marsboard
+  DEVICE_VENDOR := HAOYU Electronics
+  DEVICE_MODEL := MarsBoard A10
+  DEVICE_PACKAGES:=kmod-ata-core kmod-ata-sunxi kmod-sun4i-emac \
+	kmod-rtc-sunxi kmod-sound-core kmod-sound-soc-sunxi
+  SUPPORTED_DEVICES += marsboard,a10-marsboard
+  SOC := sun4i
+endef
+TARGET_DEVICES += haoyu_a10-marsboard
+
 define Device/linksprite_a10-pcduino
  DEVICE_VENDOR := LinkSprite
  DEVICE_MODEL := pcDuino
@ -19,15 +29,6 @@ define Device/linksprite_a10-pcduino
 endef
 TARGET_DEVICES += linksprite_a10-pcduino

-define Device/marsboard_a10-marsboard
-  DEVICE_VENDOR := HAOYU Electronics
-  DEVICE_MODEL := MarsBoard A10
-  DEVICE_PACKAGES:=kmod-ata-core kmod-ata-sunxi kmod-sun4i-emac \
-	kmod-rtc-sunxi kmod-sound-soc-sunxi
-  SOC := sun4i
-endef
-TARGET_DEVICES += marsboard_a10-marsboard
-
 define Device/olimex_a10-olinuxino-lime
  DEVICE_VENDOR := Olimex
  DEVICE_MODEL := A10-OLinuXino-LIME
--- a/target/linux/sunxi/modules.mk
+++ b/target/linux/sunxi/modules.mk
@ -2,11 +2,44 @@
 #
 # Copyright (C) 2013-2016 OpenWrt.org

+define KernelPackage/mfd-ac100
+    SUBMENU:=$(OTHER_MENU)
+    TITLE:=X-Powers AC100 MFD support
+    DEPENDS:=@TARGET_sunxi
+    KCONFIG:= \
+	CONFIG_MFD_AC100
+    FILES:=$(LINUX_DIR)/drivers/mfd/ac100.ko
+    AUTOLOAD:=$(call AutoLoad,50,ac100)
+endef
+
+define KernelPackage/mfd-ac100/description
+ Support for the X-Powers AC100 RTC/audio chip
+endef
+
+$(eval $(call KernelPackage,mfd-ac100))
+
+define KernelPackage/rtc-ac100
+    SUBMENU:=$(OTHER_MENU)
+    TITLE:=X-Powers AC100 RTC support
+    DEPENDS:=@TARGET_sunxi +kmod-mfd-ac100
+    $(call AddDepends/rtc)
+    KCONFIG:= \
+	CONFIG_RTC_DRV_AC100 \
+	CONFIG_RTC_CLASS=y
+    FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ac100.ko
+    AUTOLOAD:=$(call AutoLoad,50,rtc-ac100)
+endef
+
+define KernelPackage/rtc-ac100/description
+ Support for the X-Powers AC100 RTC
+endef
+
+$(eval $(call KernelPackage,rtc-ac100))
+
 define KernelPackage/rtc-sunxi
    SUBMENU:=$(OTHER_MENU)
    TITLE:=Sunxi SoC built-in RTC support
-    DEPENDS:=@TARGET_sunxi
-    $(call AddDepends/rtc)
+    DEPENDS:=@(TARGET_sunxi&&RTC_SUPPORT)
    KCONFIG:= \
 	CONFIG_RTC_DRV_SUNXI \
 	CONFIG_RTC_CLASS=y
@ -22,20 +55,20 @@ $(eval $(call KernelPackage,rtc-sunxi))

 define KernelPackage/sunxi-ir
    SUBMENU:=$(OTHER_MENU)
-    TITLE:=Sunxi SoC built-in IR support (A20)
-    DEPENDS:=@TARGET_sunxi +kmod-input-core
-    $(call AddDepends/rtc)
+    TITLE:=Sunxi SoC built-in IR support
+    DEPENDS:=@(TARGET_sunxi&&RTC_SUPPORT) +kmod-input-core
    KCONFIG:= \
 	CONFIG_MEDIA_SUPPORT=y \
 	CONFIG_MEDIA_RC_SUPPORT=y \
 	CONFIG_RC_DEVICES=y \
+	CONFIG_RC_CORE=y \
 	CONFIG_IR_SUNXI
    FILES:=$(LINUX_DIR)/drivers/media/rc/sunxi-cir.ko
    AUTOLOAD:=$(call AutoLoad,50,sunxi-cir)
 endef

 define KernelPackage/sunxi-ir/description
- Support for the AllWinner sunXi SoC's onboard IR (A20)
+ Support for the AllWinner sunXi SoC's onboard IR
 endef

 $(eval $(call KernelPackage,sunxi-ir))
--- a/target/linux/sunxi/patches-5.10/062-add-sun8i-h3-zeropi-support.patch
+++ b/target/linux/sunxi/patches-5.10/062-add-sun8i-h3-zeropi-support.patch
@ -1,79 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1204,6 +1204,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-h3-orangepi-zero-plus2.dtb \
- 	sun8i-h3-rervision-dvk.dtb \
- 	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
-+	sun8i-h3-zeropi.dtb \
- 	sun8i-r16-bananapi-m2m.dtb \
- 	sun8i-r16-nintendo-nes-classic.dtb \
- 	sun8i-r16-nintendo-super-nes-classic.dtb \
--- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
-@@ -0,0 +1,66 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+	model = "FriendlyElec ZeroPi";
-+	compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
-+
-+	aliases {
-+		ethernet0 = &emac;
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gmac_power_pin_nanopi>;
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	gmac_power_pin_nanopi: gmac_power_pin@0 {
-+		pins = "PD6";
-+		function = "gpio_out";
-+	};
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+
-+	allwinner,leds-active-low;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	status = "okay";
-+	dr_mode = "peripheral";
-+};
-+
-+&usbphy {
-+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-+};
--- a/target/linux/sunxi/patches-5.10/100-sunxi-h3-add-support-for-nanopi-r1.patch
+++ b/target/linux/sunxi/patches-5.10/100-sunxi-h3-add-support-for-nanopi-r1.patch
@ -1,186 +0,0 @@
-From 5aee0b1272cd5b42933ef629d66b677669e2e8d2 Mon Sep 17 00:00:00 2001
-From: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-Date: Mon, 12 Oct 2020 05:24:51 +0000
-Subject: [PATCH] sunxi: add support for friendlyarm nanopi r1
-
-Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
---
- .../devicetree/bindings/arm/sunxi.yaml        |   5 +
- arch/arm/boot/dts/Makefile                    |   1 +
- arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts      | 146 ++++++++++++++++++
- 3 files changed, 152 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
-+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
-@@ -251,6 +251,11 @@ properties:
-           - const: friendlyarm,nanopi-neo-plus2
-           - const: allwinner,sun50i-h5
- 
-+      - description: FriendlyARM NanoPi R1
-+        items:
-+          - const: friendlyarm,nanopi-r1
-+          - const: allwinner,sun8i-h3
-+
-       - description: Gemei G9 Tablet
-         items:
-           - const: gemei,g9
--- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1194,6 +1194,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-h3-nanopi-m1-plus.dtb \
- 	sun8i-h3-nanopi-neo.dtb \
- 	sun8i-h3-nanopi-neo-air.dtb \
-+	sun8i-h3-nanopi-r1.dtb \
- 	sun8i-h3-orangepi-2.dtb \
- 	sun8i-h3-orangepi-lite.dtb \
- 	sun8i-h3-orangepi-one.dtb \
--- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-@@ -0,0 +1,146 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
-+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-+ */
-+
-+/* NanoPi R1 is based on the NanoPi-H3 design from FriendlyARM */
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+	model = "FriendlyARM NanoPi R1";
-+	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+	vdd_cpux: gpio-regulator {
-+		compatible = "regulator-gpio";
-+		pinctrl-names = "default";
-+		regulator-name = "vdd-cpux";
-+		regulator-type = "voltage";
-+		regulator-boot-on;
-+		regulator-always-on;
-+		regulator-min-microvolt = <1100000>;
-+		regulator-max-microvolt = <1300000>;
-+		regulator-ramp-delay = <50>;
-+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
-+		gpios-states = <0x1>;
-+		states = <1100000 0x0
-+			  1300000 0x1>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
-+	};
-+
-+	leds {
-+		/delete-node/ pwr;
-+		status {
-+			label = "nanopi:red:status";
-+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		wan {
-+			label = "nanopi:green:wan";
-+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		lan {
-+			label = "nanopi:green:lan";
-+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	r_gpio_keys {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&sw_r_npi>;
-+
-+		/delete-node/ k1;
-+		reset {
-+			label = "reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpux>;
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&ehci2 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+	status = "okay";
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	sdio_wifi: sdio_wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>;
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_8bit_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <8>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&ohci2 {
-+	status = "okay";
-+};
-+
-+&r_pio {
-+	sw_r_npi: key_pins {
-+		pins = "PL3";
-+		function = "gpio_in";
-+	};
-+};
--- a/target/linux/sunxi/patches-5.4/062-add-sun8i-h3-zeropi-support.patch
+++ b/target/linux/sunxi/patches-5.4/062-add-sun8i-h3-zeropi-support.patch
@ -1,79 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1118,6 +1118,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-h3-orangepi-plus2e.dtb \
- 	sun8i-h3-orangepi-zero-plus2.dtb \
- 	sun8i-h3-rervision-dvk.dtb \
-+	sun8i-h3-zeropi.dtb \
- 	sun8i-r16-bananapi-m2m.dtb \
- 	sun8i-r16-nintendo-nes-classic.dtb \
- 	sun8i-r16-nintendo-super-nes-classic.dtb \
--- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
-@@ -0,0 +1,66 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+	model = "FriendlyElec ZeroPi";
-+	compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
-+
-+	aliases {
-+		ethernet0 = &emac;
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gmac_power_pin_nanopi>;
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	gmac_power_pin_nanopi: gmac_power_pin@0 {
-+		pins = "PD6";
-+		function = "gpio_out";
-+	};
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+
-+	allwinner,leds-active-low;
-+	status = "okay";
-+};
-+
-+&usb_otg {
-+	status = "okay";
-+	dr_mode = "peripheral";
-+};
-+
-+&usbphy {
-+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-+};
--- a/target/linux/sunxi/patches-5.4/100-sunxi-h3-add-support-for-nanopi-r1.patch
+++ b/target/linux/sunxi/patches-5.4/100-sunxi-h3-add-support-for-nanopi-r1.patch
@ -1,186 +0,0 @@
-From 5aee0b1272cd5b42933ef629d66b677669e2e8d2 Mon Sep 17 00:00:00 2001
-From: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-Date: Mon, 12 Oct 2020 05:24:51 +0000
-Subject: [PATCH] sunxi: add support for friendlyarm nanopi r1
-
-Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
---
- .../devicetree/bindings/arm/sunxi.yaml        |   5 +
- arch/arm/boot/dts/Makefile                    |   1 +
- arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts      | 146 ++++++++++++++++++
- 3 files changed, 152 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
-+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
-@@ -241,6 +241,11 @@ properties:
-           - const: friendlyarm,nanopi-neo-plus2
-           - const: allwinner,sun50i-h5
- 
-+      - description: FriendlyARM NanoPi R1
-+        items:
-+          - const: friendlyarm,nanopi-r1
-+          - const: allwinner,sun8i-h3
-+
-       - description: Gemei G9 Tablet
-         items:
-           - const: gemei,g9
--- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1109,6 +1109,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-h3-nanopi-m1-plus.dtb \
- 	sun8i-h3-nanopi-neo.dtb \
- 	sun8i-h3-nanopi-neo-air.dtb \
-+	sun8i-h3-nanopi-r1.dtb \
- 	sun8i-h3-orangepi-2.dtb \
- 	sun8i-h3-orangepi-lite.dtb \
- 	sun8i-h3-orangepi-one.dtb \
--- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-@@ -0,0 +1,146 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
-+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-+ */
-+
-+/* NanoPi R1 is based on the NanoPi-H3 design from FriendlyARM */
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+	model = "FriendlyARM NanoPi R1";
-+	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+	vdd_cpux: gpio-regulator {
-+		compatible = "regulator-gpio";
-+		pinctrl-names = "default";
-+		regulator-name = "vdd-cpux";
-+		regulator-type = "voltage";
-+		regulator-boot-on;
-+		regulator-always-on;
-+		regulator-min-microvolt = <1100000>;
-+		regulator-max-microvolt = <1300000>;
-+		regulator-ramp-delay = <50>;
-+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
-+		gpios-states = <0x1>;
-+		states = <1100000 0x0
-+			  1300000 0x1>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
-+	};
-+
-+	leds {
-+		/delete-node/ pwr;
-+		status {
-+			label = "nanopi:red:status";
-+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		wan {
-+			label = "nanopi:green:wan";
-+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		lan {
-+			label = "nanopi:green:lan";
-+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	r_gpio_keys {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&sw_r_npi>;
-+
-+		/delete-node/ k1;
-+		reset {
-+			label = "reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&vdd_cpux>;
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&ehci2 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+	status = "okay";
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	sdio_wifi: sdio_wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>;
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_8bit_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <8>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&ohci2 {
-+	status = "okay";
-+};
-+
-+&r_pio {
-+	sw_r_npi: key_pins {
-+		pins = "PL3";
-+		function = "gpio_in";
-+	};
-+};
--- a/target/linux/sunxi/patches-5.4/301-orangepi_pc2_usb_otg_to_host_key_power.patch
+++ b/target/linux/sunxi/patches-5.4/301-orangepi_pc2_usb_otg_to_host_key_power.patch
@ -1,20 +0,0 @@
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-@@ -98,7 +98,7 @@
- 
- 		sw4 {
- 			label = "sw4";
-			linux,code = <BTN_0>;
-+			linux,code = <KEY_POWER>;
- 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
- 		};
- 	};
-@@ -238,7 +238,7 @@
- };
- 
- &usb_otg {
-	dr_mode = "otg";
-+	dr_mode = "host";
- 	status = "okay";
- };
- 
--- a/target/linux/sunxi/patches-5.4/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch
+++ b/target/linux/sunxi/patches-5.4/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch
@ -1,86 +0,0 @@
-From 49cd9ea6dc8d68eb519ccd9f31c9730dec8a181a Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 8 Mar 2018 22:14:50 +0100
-Subject: [PATCH] Revert "ARM: dts: sun7i: Add BCM53125 switch nodes to the
- lamobo-r1 board"
-
-This reverts the changes needed for the upstream b53 DSA switch driver 
-to use the OpenWrt b43 swconfig switch driver.
-
-This reverts commit 0cdefd5b5485ee6eb3512a75739d09a4090176ed.
-This reverts commit d7b9eaff5f0ca00726336b4c0c3c29decf30412a.
---
- arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 60 ++-----------------------------
- 1 file changed, 3 insertions(+), 57 deletions(-)
-
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
-@@ -120,65 +120,13 @@
- &gmac {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&gmac_rgmii_pins>;
-+	phy = <&phy1>;
- 	phy-mode = "rgmii";
- 	phy-supply = <&reg_gmac_3v3>;
- 	status = "okay";
- 
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch: ethernet-switch@1e {
-			compatible = "brcm,bcm53125";
-			reg = <30>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port0: port@0 {
-					reg = <0>;
-					label = "lan2";
-				};
-
-				port1: port@1 {
-					reg = <1>;
-					label = "lan3";
-				};
-
-				port2: port@2 {
-					reg = <2>;
-					label = "lan4";
-				};
-
-				port3: port@3 {
-					reg = <3>;
-					label = "wan";
-				};
-
-				port4: port@4 {
-					reg = <4>;
-					label = "lan1";
-				};
-
-				port8: port@8 {
-					reg = <8>;
-					label = "cpu";
-					ethernet = <&gmac>;
-					phy-mode = "rgmii-txid";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-+	phy1: ethernet-phy@1 {
-+		reg = <1>;
- 	};
- };
- 
--- a/target/linux/sunxi/patches-5.4/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch
+++ b/target/linux/sunxi/patches-5.4/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch
@ -1,46 +0,0 @@
-From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001
-From: Oskari Lemmela <oskari@lemmela.net>
-Date: Mon, 31 Dec 2018 07:44:49 +0200
-Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions.
-
-First 896kB to u-boot. Enough space for SPL, u-boot and ATF.
-Next 128kB to u-boot environment and rest to firmware.
-
-Firmware partition is compatible FIT image dynamic splitting.
-
-Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
---
- .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
-@@ -81,6 +81,28 @@
- 		compatible = "jedec,spi-nor";
- 		reg = <0>;
- 		spi-max-frequency = <40000000>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "u-boot";
-+				reg = <0x000000 0x0E0000>;
-+			};
-+
-+			partition@e0000 {
-+				label = "u-boot-env";
-+				reg = <0x0E0000 0x020000>;
-+			};
-+
-+			partition@100000 {
-+				compatible = "denx,fit";
-+				label = "firmware";
-+				reg = <0x100000 0xF00000>;
-+			};
-+		};
- 	};
- };
- 
--- a/target/linux/sunxi/patches-5.4/410-v5.6-arm64-dts-allwinner-a64-olinuxino-Add-bank-supply-re.patch
+++ b/target/linux/sunxi/patches-5.4/410-v5.6-arm64-dts-allwinner-a64-olinuxino-Add-bank-supply-re.patch
@ -1,58 +0,0 @@
-From f0c3b29f56f0a946df4941edfe2d98e3e766c30f Mon Sep 17 00:00:00 2001
-From: Stefan Mavrodiev <stefan@olimex.com>
-Date: Fri, 29 Nov 2019 13:39:40 +0200
-Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: Add bank supply
- regulators
-
-Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL. This
-patch adds regulators for them to the pinctrl node.
-
-Exception is PL which is used by the RSB bus. To avoid circular
-dependencies, VCC-PL is omitted.
-
-On boards with eMMC, VCC-PC is supplied by ELDO1, instead of DCDC1.
-
-Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
-[Maxime: Changed the r_pio comment a bit]
-Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
- .../dts/allwinner/sun50i-a64-olinuxino-emmc.dts |  4 ++++
- .../boot/dts/allwinner/sun50i-a64-olinuxino.dts | 17 +++++++++++++++++
- 2 files changed, 21 insertions(+)
-
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
-@@ -21,3 +21,7 @@
- 	cap-mmc-hw-reset;
- 	status = "okay";
- };
-+
-+&pio {
-+	vcc-pc-supply = <&reg_eldo1>;
-+};
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-@@ -163,6 +163,23 @@
- 	status = "okay";
- };
- 
-+&pio {
-+	vcc-pc-supply = <&reg_dcdc1>;
-+	vcc-pd-supply = <&reg_dcdc1>;
-+	vcc-pe-supply = <&reg_aldo1>;
-+	vcc-pg-supply = <&reg_dldo4>;
-+};
-+
-+&r_pio {
-+	/*
-+	 * FIXME: We can't add that supply for now since it would
-+	 * create a circular dependency between pinctrl, the regulator
-+	 * and the RSB Bus.
-+	 *
-+	 * vcc-pl-supply = <&reg_aldo2>;
-+	 */
-+};
-+
- &r_rsb {
- 	status = "okay";
- 
--- a/target/linux/sunxi/patches-5.4/420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch
+++ b/target/linux/sunxi/patches-5.4/420-v5.7-arm64-dts-allwinner-a64-olinuxino-add-user-red-LED.patch
@ -1,32 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Wed, 25 Mar 2020 18:11:16 +0100
-Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: add user red LED
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There is a red LED marked as `GPIO_LED1` on the silkscreen and connected
-to PE17 by default. So lets add this missing bit in the current hardware
-description.
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-@@ -70,6 +70,15 @@
- 		};
- 	};
- 
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		user {
-+			label = "a64-olinuxino:red:user";
-+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
-+		};
-+	};
-+
- 	reg_usb1_vbus: usb1-vbus {
- 		compatible = "regulator-fixed";
- 		regulator-name = "usb1-vbus";
--- a/target/linux/sunxi/patches-5.4/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch
+++ b/target/linux/sunxi/patches-5.4/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch
@ -1,32 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Thu, 26 Mar 2020 10:09:19 +0100
-Subject: [PATCH] arm64: dts: allwinner: a64: olinuxino: add status LED aliases
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
-@@ -53,6 +53,10 @@
- 	aliases {
- 		ethernet0 = &emac;
- 		serial0 = &uart0;
-+		led-boot = &led_user;
-+		led-failsafe = &led_user;
-+		led-running = &led_user;
-+		led-upgrade = &led_user;
- 	};
- 
- 	chosen {
-@@ -73,7 +77,7 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
-		user {
-+		led_user: user {
- 			label = "a64-olinuxino:red:user";
- 			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
- 		};
--- a/target/linux/sunxi/patches-5.4/440-add-h6-pwm.patch
+++ b/target/linux/sunxi/patches-5.4/440-add-h6-pwm.patch
@ -1,305 +0,0 @@
--- a/drivers/pwm/pwm-sun4i.c
-+++ b/drivers/pwm/pwm-sun4i.c
-@@ -3,6 +3,10 @@
-  * Driver for Allwinner sun4i Pulse Width Modulation Controller
-  *
-  * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
-+ *
-+ * Limitations:
-+ * - When outputing the source clock directly, the PWM logic will be bypassed
-+ *   and the currently running period is not guaranteed to be completed
-  */
- 
- #include <linux/bitops.h>
-@@ -16,6 +20,7 @@
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/pwm.h>
-+#include <linux/reset.h>
- #include <linux/slab.h>
- #include <linux/spinlock.h>
- #include <linux/time.h>
-@@ -72,12 +77,15 @@ static const u32 prescaler_table[] = {
- 
- struct sun4i_pwm_data {
- 	bool has_prescaler_bypass;
-+	bool has_direct_mod_clk_output;
- 	unsigned int npwm;
- };
- 
- struct sun4i_pwm_chip {
- 	struct pwm_chip chip;
-+	struct clk *bus_clk;
- 	struct clk *clk;
-+	struct reset_control *rst;
- 	void __iomem *base;
- 	spinlock_t ctrl_lock;
- 	const struct sun4i_pwm_data *data;
-@@ -115,6 +123,20 @@ static void sun4i_pwm_get_state(struct p
- 
- 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- 
-+	/*
-+	 * PWM chapter in H6 manual has a diagram which explains that if bypass
-+	 * bit is set, no other setting has any meaning. Even more, experiment
-+	 * proved that also enable bit is ignored in this case.
-+	 */
-+	if ((val & BIT_CH(PWM_BYPASS, pwm->hwpwm)) &&
-+	    sun4i_pwm->data->has_direct_mod_clk_output) {
-+		state->period = DIV_ROUND_UP_ULL(NSEC_PER_SEC, clk_rate);
-+		state->duty_cycle = DIV_ROUND_UP_ULL(state->period, 2);
-+		state->polarity = PWM_POLARITY_NORMAL;
-+		state->enabled = true;
-+		return;
-+	}
-+
- 	if ((PWM_REG_PRESCAL(val, pwm->hwpwm) == PWM_PRESCAL_MASK) &&
- 	    sun4i_pwm->data->has_prescaler_bypass)
- 		prescaler = 1;
-@@ -146,13 +168,24 @@ static void sun4i_pwm_get_state(struct p
- 
- static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
- 			       const struct pwm_state *state,
-			       u32 *dty, u32 *prd, unsigned int *prsclr)
-+			       u32 *dty, u32 *prd, unsigned int *prsclr,
-+			       bool *bypass)
- {
- 	u64 clk_rate, div = 0;
- 	unsigned int pval, prescaler = 0;
- 
- 	clk_rate = clk_get_rate(sun4i_pwm->clk);
- 
-+	*bypass = sun4i_pwm->data->has_direct_mod_clk_output &&
-+		  state->enabled &&
-+		  (state->period * clk_rate >= NSEC_PER_SEC) &&
-+		  (state->period * clk_rate < 2 * NSEC_PER_SEC) &&
-+		  (state->duty_cycle * clk_rate * 2 >= NSEC_PER_SEC);
-+
-+	/* Skip calculation of other parameters if we bypass them */
-+	if (*bypass)
-+		return 0;
-+
- 	if (sun4i_pwm->data->has_prescaler_bypass) {
- 		/* First, test without any prescaler when available */
- 		prescaler = PWM_PRESCAL_MASK;
-@@ -200,10 +233,11 @@ static int sun4i_pwm_apply(struct pwm_ch
- {
- 	struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
- 	struct pwm_state cstate;
-	u32 ctrl;
-+	u32 ctrl, duty, period, val;
- 	int ret;
-	unsigned int delay_us;
-+	unsigned int delay_us, prescaler;
- 	unsigned long now;
-+	bool bypass;
- 
- 	pwm_get_state(pwm, &cstate);
- 
-@@ -218,43 +252,50 @@ static int sun4i_pwm_apply(struct pwm_ch
- 	spin_lock(&sun4i_pwm->ctrl_lock);
- 	ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
- 
-	if ((cstate.period != state->period) ||
-	    (cstate.duty_cycle != state->duty_cycle)) {
-		u32 period, duty, val;
-		unsigned int prescaler;
-+	ret = sun4i_pwm_calculate(sun4i_pwm, state, &duty, &period, &prescaler,
-+				  &bypass);
-+	if (ret) {
-+		dev_err(chip->dev, "period exceeds the maximum value\n");
-+		spin_unlock(&sun4i_pwm->ctrl_lock);
-+		if (!cstate.enabled)
-+			clk_disable_unprepare(sun4i_pwm->clk);
-+		return ret;
-+	}
- 
-		ret = sun4i_pwm_calculate(sun4i_pwm, state,
-					  &duty, &period, &prescaler);
-		if (ret) {
-			dev_err(chip->dev, "period exceeds the maximum value\n");
-+	if (sun4i_pwm->data->has_direct_mod_clk_output) {
-+		if (bypass) {
-+			ctrl |= BIT_CH(PWM_BYPASS, pwm->hwpwm);
-+			/* We can skip other parameter */
-+			sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
- 			spin_unlock(&sun4i_pwm->ctrl_lock);
-			if (!cstate.enabled)
-				clk_disable_unprepare(sun4i_pwm->clk);
-			return ret;
-+			return 0;
-+		} else {
-+			ctrl &= ~BIT_CH(PWM_BYPASS, pwm->hwpwm);
- 		}
-+	}
- 
-		if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
-			/* Prescaler changed, the clock has to be gated */
-			ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-			sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
-
-			ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
-			ctrl |= BIT_CH(prescaler, pwm->hwpwm);
-		}
-+	if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
-+		/* Prescaler changed, the clock has to be gated */
-+		ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-+		sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
- 
-		val = (duty & PWM_DTY_MASK) | PWM_PRD(period);
-		sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
-		sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
-			usecs_to_jiffies(cstate.period / 1000 + 1);
-		sun4i_pwm->needs_delay[pwm->hwpwm] = true;
-+		ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
-+		ctrl |= BIT_CH(prescaler, pwm->hwpwm);
- 	}
- 
-+	val = (duty & PWM_DTY_MASK) | PWM_PRD(period);
-+	sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
-+	sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
-+		usecs_to_jiffies(cstate.period / 1000 + 1);
-+	sun4i_pwm->needs_delay[pwm->hwpwm] = true;
-+
- 	if (state->polarity != PWM_POLARITY_NORMAL)
- 		ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
- 	else
- 		ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
- 
- 	ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-+
- 	if (state->enabled) {
- 		ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
- 	} else if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
-@@ -320,6 +361,12 @@ static const struct sun4i_pwm_data sun4i
- 	.npwm = 1,
- };
- 
-+static const struct sun4i_pwm_data sun50i_h6_pwm_data = {
-+	.has_prescaler_bypass = true,
-+	.has_direct_mod_clk_output = true,
-+	.npwm = 2,
-+};
-+
- static const struct of_device_id sun4i_pwm_dt_ids[] = {
- 	{
- 		.compatible = "allwinner,sun4i-a10-pwm",
-@@ -337,6 +384,9 @@ static const struct of_device_id sun4i_p
- 		.compatible = "allwinner,sun8i-h3-pwm",
- 		.data = &sun4i_pwm_single_bypass,
- 	}, {
-+		.compatible = "allwinner,sun50i-h6-pwm",
-+		.data = &sun50i_h6_pwm_data,
-+	}, {
- 		/* sentinel */
- 	},
- };
-@@ -361,9 +411,69 @@ static int sun4i_pwm_probe(struct platfo
- 	if (IS_ERR(pwm->base))
- 		return PTR_ERR(pwm->base);
- 
-	pwm->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pwm->clk))
-+	/*
-+	 * All hardware variants need a source clock that is divided and
-+	 * then feeds the counter that defines the output wave form. In the
-+	 * device tree this clock is either unnamed or called "mod".
-+	 * Some variants (e.g. H6) need another clock to access the
-+	 * hardware registers; this is called "bus".
-+	 * So we request "mod" first (and ignore the corner case that a
-+	 * parent provides a "mod" clock while the right one would be the
-+	 * unnamed one of the PWM device) and if this is not found we fall
-+	 * back to the first clock of the PWM.
-+	 */
-+	pwm->clk = devm_clk_get_optional(&pdev->dev, "mod");
-+	if (IS_ERR(pwm->clk)) {
-+		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "get mod clock failed %pe\n",
-+				pwm->clk);
- 		return PTR_ERR(pwm->clk);
-+	}
-+
-+	if (!pwm->clk) {
-+		pwm->clk = devm_clk_get(&pdev->dev, NULL);
-+		if (IS_ERR(pwm->clk)) {
-+			if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+				dev_err(&pdev->dev, "get unnamed clock failed %pe\n",
-+					pwm->clk);
-+			return PTR_ERR(pwm->clk);
-+		}
-+	}
-+
-+	pwm->bus_clk = devm_clk_get_optional(&pdev->dev, "bus");
-+	if (IS_ERR(pwm->bus_clk)) {
-+		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "get bus clock failed %pe\n",
-+				pwm->bus_clk);
-+		return PTR_ERR(pwm->bus_clk);
-+	}
-+
-+	pwm->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
-+	if (IS_ERR(pwm->rst)) {
-+		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-+			dev_err(&pdev->dev, "get reset failed %pe\n",
-+				pwm->rst);
-+		return PTR_ERR(pwm->rst);
-+	}
-+
-+	/* Deassert reset */
-+	ret = reset_control_deassert(pwm->rst);
-+	if (ret) {
-+		dev_err(&pdev->dev, "cannot deassert reset control: %pe\n",
-+			ERR_PTR(ret));
-+		return ret;
-+	}
-+
-+	/*
-+	 * We're keeping the bus clock on for the sake of simplicity.
-+	 * Actually it only needs to be on for hardware register accesses.
-+	 */
-+	ret = clk_prepare_enable(pwm->bus_clk);
-+	if (ret) {
-+		dev_err(&pdev->dev, "cannot prepare and enable bus_clk %pe\n",
-+			ERR_PTR(ret));
-+		goto err_bus;
-+	}
- 
- 	pwm->chip.dev = &pdev->dev;
- 	pwm->chip.ops = &sun4i_pwm_ops;
-@@ -377,19 +487,34 @@ static int sun4i_pwm_probe(struct platfo
- 	ret = pwmchip_add(&pwm->chip);
- 	if (ret < 0) {
- 		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
-		return ret;
-+		goto err_pwm_add;
- 	}
- 
- 	platform_set_drvdata(pdev, pwm);
- 
- 	return 0;
-+
-+err_pwm_add:
-+	clk_disable_unprepare(pwm->bus_clk);
-+err_bus:
-+	reset_control_assert(pwm->rst);
-+
-+	return ret;
- }
- 
- static int sun4i_pwm_remove(struct platform_device *pdev)
- {
- 	struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev);
-+	int ret;
-+
-+	ret = pwmchip_remove(&pwm->chip);
-+	if (ret)
-+		return ret;
- 
-	return pwmchip_remove(&pwm->chip);
-+	clk_disable_unprepare(pwm->bus_clk);
-+	reset_control_assert(pwm->rst);
-+
-+	return 0;
- }
- 
- static struct platform_driver sun4i_pwm_driver = {
--- a/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch
+++ b/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch
@ -1,35 +0,0 @@
-From: Jernej Skrabec <jernej.skrabec@siol.net>
-
-Allwinner H6 PWM is similar to that in A20 except that it has additional
-bus clock and reset line.
-
-Note that first PWM channel is connected to output pin and second
-channel is used internally, as a clock source to AC200 co-packaged chip.
-This means that any combination of these two channels can be used and
-thus it doesn't make sense to add pinctrl nodes at this point.
-
-Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
-Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-@@ -231,6 +231,16 @@
- 			status = "disabled";
- 		};
- 
-+		pwm: pwm@300a000 {
-+			compatible = "allwinner,sun50i-h6-pwm";
-+			reg = <0x0300a000 0x400>;
-+			clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
-+			clock-names = "mod", "bus";
-+			resets = <&ccu RST_BUS_PWM>;
-+			#pwm-cells = <3>;
-+			status = "disabled";
-+		};
-+
- 		pio: pinctrl@300b000 {
- 			compatible = "allwinner,sun50i-h6-pinctrl";
- 			reg = <0x0300b000 0x400>;
--- a/target/linux/sunxi/patches-5.4/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
+++ b/target/linux/sunxi/patches-5.4/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
@ -1,10 +0,0 @@
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-@@ -10,3 +10,7 @@
- 	model = "OrangePi One Plus";
- 	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
- };
-+
-+&pwm {
-+	status = "okay";
-+};
--- a/target/linux/sunxi/patches-5.4/443-board-h6-orangepioneplus-fix-missing-ethernet.patch
+++ b/target/linux/sunxi/patches-5.4/443-board-h6-orangepioneplus-fix-missing-ethernet.patch
@ -1,44 +0,0 @@
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
-@@ -9,6 +9,41 @@
- / {
- 	model = "OrangePi One Plus";
- 	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		ethernet0 = &emac;
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+                compatible = "regulator-fixed";
-+                regulator-name = "vcc-gmac-3v3";
-+                regulator-min-microvolt = <3300000>;
-+                regulator-max-microvolt = <3300000>;
-+                startup-delay-us = <100000>;
-+                enable-active-high;
-+                gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
-+                vin-supply = <&reg_aldo2>;
-+        };
-+};
-+
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&ext_rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	allwinner,rx-delay-ps = <200>;
-+	allwinner,tx-delay-ps = <200>;
-+	status = "okay";
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
- };
- 
- &pwm {
--- a/target/linux/sunxi/patches-5.4/450-arm64-dts-enable-wifi-on-pine64-boards.patch
+++ b/target/linux/sunxi/patches-5.4/450-arm64-dts-enable-wifi-on-pine64-boards.patch
@ -1,72 +0,0 @@
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-@@ -78,6 +78,11 @@
- 		regulator-min-microvolt = <1800000>;
- 		regulator-max-microvolt = <1800000>;
- 	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+	};
- };
- 
- &ac_power_supply {
-@@ -138,6 +143,21 @@
- 		reg = <1>;
- 	};
- };
-+
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo4>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8723cs: wifi@1 {
-+		reg = <1>;
-+	};
-+};
- 
- &mmc2 {
- 	pinctrl-names = "default";
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -73,6 +73,11 @@
- 			};
- 		};
- 	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+	};
- };
- 
- &codec {
-@@ -146,6 +151,21 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_dldo4>;
-+	vqmmc-supply = <&reg_eldo1>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	rtl8723cs: wifi@1 {
-+		reg = <1>;
-+	};
-+};
-+
- &ohci0 {
- 	status = "okay";
- };
--- a/target/linux/sunxi/patches-6.1/001-v6.2-dt-bindings-usb-Add-H616-compatible-string.patch
+++ b/target/linux/sunxi/patches-6.1/001-v6.2-dt-bindings-usb-Add-H616-compatible-string.patch
@ -0,0 +1,38 @@
+From 28a1a6474c5053bae01bd29946b4d5ede539176b Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 31 Oct 2022 11:13:52 +0000
+Subject: [PATCH] dt-bindings: usb: Add H616 compatible string
+
+The Allwinner H616 contains four fully OHCI/EHCI compatible USB host
+controllers, so just add their compatible strings to the list of
+generic OHCI/EHCI controllers.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Link: https://lore.kernel.org/r/20221031111358.3387297-2-andre.przywara@arm.com
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ Documentation/devicetree/bindings/usb/generic-ehci.yaml | 1 +
+ Documentation/devicetree/bindings/usb/generic-ohci.yaml | 1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+@@ -30,6 +30,7 @@ properties:
+               - allwinner,sun4i-a10-ehci
+               - allwinner,sun50i-a64-ehci
+               - allwinner,sun50i-h6-ehci
+              - allwinner,sun50i-h616-ehci
+               - allwinner,sun5i-a13-ehci
+               - allwinner,sun6i-a31-ehci
+               - allwinner,sun7i-a20-ehci
+--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+@@ -20,6 +20,7 @@ properties:
+               - allwinner,sun4i-a10-ohci
+               - allwinner,sun50i-a64-ohci
+               - allwinner,sun50i-h6-ohci
+              - allwinner,sun50i-h616-ohci
+               - allwinner,sun5i-a13-ohci
+               - allwinner,sun6i-a31-ohci
+               - allwinner,sun7i-a20-ohci
--- a/target/linux/sunxi/patches-6.1/002-v6.2-dt-bindings-phy-Add-special-clock-for-Allwinner-H616-PHY.patch
+++ b/target/linux/sunxi/patches-6.1/002-v6.2-dt-bindings-phy-Add-special-clock-for-Allwinner-H616-PHY.patch
@ -0,0 +1,79 @@
+From 6964affe65066651eca21e97247d3b7cac5153dc Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 31 Oct 2022 11:13:53 +0000
+Subject: [PATCH] dt-bindings: phy: Add special clock for Allwinner H616 PHY
+
+The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves
+some resources from port 2's PHY and HCI IP. In particular the PMU clock
+for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL
+register of port 2. To allow each USB port to be controlled
+independently of port 2, we need a handle to that particular PMU clock
+in the *PHY* node, as the HCI and PHY part might be handled by separate
+drivers.
+
+Add that clock to the requirements of the H616 PHY binding, so that a
+PHY driver can apply the quirk in isolation, without requiring help from
+port 2's HCI driver.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Reviewed-by: Rob Herring <robh@kernel.org>
+Link: https://lore.kernel.org/r/20221031111358.3387297-3-andre.przywara@arm.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+ .../phy/allwinner,sun8i-h3-usb-phy.yaml       | 26 +++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+
+--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
+@@ -36,18 +36,22 @@ properties:
+       - const: pmu3
+ 
+   clocks:
+    minItems: 4
+     items:
+       - description: USB OTG PHY bus clock
+       - description: USB Host 0 PHY bus clock
+       - description: USB Host 1 PHY bus clock
+       - description: USB Host 2 PHY bus clock
+      - description: PMU clock for host port 2
+ 
+   clock-names:
+    minItems: 4
+     items:
+       - const: usb0_phy
+       - const: usb1_phy
+       - const: usb2_phy
+       - const: usb3_phy
+      - const: pmu2_clk
+ 
+   resets:
+     items:
+@@ -96,6 +100,28 @@ required:
+   - resets
+   - reset-names
+ 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun50i-h616-usb-phy
+    then:
+      properties:
+        clocks:
+          minItems: 5
+
+        clock-names:
+          minItems: 5
+    else:
+      properties:
+        clocks:
+          maxItems: 4
+
+        clock-names:
+          maxItems: 4
+
+ additionalProperties: false
+ 
+ examples:
--- a/target/linux/sunxi/patches-6.1/003-v6.2-arm64-dts-allwinner-h616-Add-USB-nodes.patch
+++ b/target/linux/sunxi/patches-6.1/003-v6.2-arm64-dts-allwinner-h616-Add-USB-nodes.patch
@ -0,0 +1,188 @@
+From f40cf244c3feb4e1a442f8029b691add2c65b3ab Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 31 Oct 2022 11:13:56 +0000
+Subject: [PATCH] arm64: dts: allwinner: h616: Add USB nodes
+
+Add the nodes for the MUSB and the four USB host controllers to the SoC
+.dtsi, along with the PHY node needed to bind all of them together.
+
+EHCI/OHCI and MUSB are compatible to previous SoCs, but the PHY requires
+some quirks (handled in the driver).
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Link: https://lore.kernel.org/r/20221031111358.3387297-6-andre.przywara@arm.com
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160 ++++++++++++++++++
+ 1 file changed, 160 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -504,6 +504,166 @@
+ 			};
+ 		};
+ 
+		usbotg: usb@5100000 {
+			compatible = "allwinner,sun50i-h616-musb",
+				     "allwinner,sun8i-h3-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-h616-usb-phy";
+			reg = <0x05100400 0x24>,
+			      <0x05101800 0x14>,
+			      <0x05200800 0x14>,
+			      <0x05310800 0x14>,
+			      <0x05311800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>,
+				 <&ccu CLK_BUS_EHCI2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy",
+				      "pmu2_clk";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@5310000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05310000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_BUS_EHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>,
+				 <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@5310400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05310400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@5311000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05311000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_BUS_EHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>,
+				 <&ccu RST_BUS_EHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@5311400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05311400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+ 		rtc: rtc@7000000 {
+ 			compatible = "allwinner,sun50i-h616-rtc";
+ 			reg = <0x07000000 0x400>;
--- a/target/linux/sunxi/patches-6.1/004-v6.2-arm64-dts-allwinner-h616-OrangePi-Zero-2-Add-USB-nodes.patch
+++ b/target/linux/sunxi/patches-6.1/004-v6.2-arm64-dts-allwinner-h616-OrangePi-Zero-2-Add-USB-nodes.patch
@ -0,0 +1,81 @@
+From db5f028309ede13767e2ba356c1975ac37a4fd6c Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 31 Oct 2022 11:13:57 +0000
+Subject: [PATCH] arm64: dts: allwinner: h616: OrangePi Zero 2: Add USB nodes
+
+The OrangePi Zero 2 has one USB-A host port, VBUS is provided by
+a GPIO controlled regulator.
+The USB-C port is meant to power the board, but is also connected to
+the USB 0 port, which we configure as an MUSB peripheral.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+Link: https://lore.kernel.org/r/20221031111358.3387297-7-andre.przywara@arm.com
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ .../allwinner/sun50i-h616-orangepi-zero2.dts  | 41 +++++++++++++++++++
+ 1 file changed, 41 insertions(+)
+
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+@@ -49,8 +49,24 @@
+ 		regulator-max-microvolt = <5000000>;
+ 		regulator-always-on;
+ 	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+	};
+};
+
+&ehci1 {
+	status = "okay";
+ };
+ 
+/* USB 2 & 3 are on headers only. */
+
+ &emac0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&ext_rgmii_pins>;
+@@ -76,6 +92,10 @@
+ 	status = "okay";
+ };
+ 
+&ohci1 {
+	status = "okay";
+};
+
+ &r_rsb {
+ 	status = "okay";
+ 
+@@ -211,3 +231,24 @@
+ 	pinctrl-0 = <&uart0_ph_pins>;
+ 	status = "okay";
+ };
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
--- a/target/linux/sunxi/patches-6.1/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch
+++ b/target/linux/sunxi/patches-6.1/102-sunxi-add-OF-node-for-USB-eth-on-NanoPi-R1S-H5.patch
@ -0,0 +1,16 @@
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
+@@ -116,6 +116,13 @@
+ 
+ &ehci1 {
+ 	status = "okay";
+
+	usb-eth@1 {
+		compatible = "realtek,rtl8153";
+		reg = <1>;
+
+		realtek,led-data = <0x78>;
+	};
+ };
+ 
+ &ehci2 {
--- a/target/linux/sunxi/patches-5.10/301-orangepi_pc2_usb_otg_to_host_key_power.patch
+++ b/target/linux/sunxi/patches-5.10/301-orangepi_pc2_usb_otg_to_host_key_power.patch
@ -2,7 +2,7 @@
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -59,7 +59,7 @@
 
- 		sw4 {
+ 		key-sw4 {
 			label = "sw4";
 -			linux,code = <BTN_0>;
 +			linux,code = <KEY_POWER>;
--- a/target/linux/sunxi/patches-5.10/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch
+++ b/target/linux/sunxi/patches-5.10/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch
--- a/target/linux/sunxi/patches-6.1/410-sunxi-add-bananapi-p2-zero.patch
+++ b/target/linux/sunxi/patches-6.1/410-sunxi-add-bananapi-p2-zero.patch
@ -0,0 +1,292 @@
+--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
+@@ -1352,6 +1352,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
+ 	sun8i-a83t-cubietruck-plus.dtb \
+ 	sun8i-a83t-tbs-a711.dtb \
+ 	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-bananapi-p2-zero.dtb \
+ 	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+ 	sun8i-h2-plus-orangepi-r1.dtb \
+ 	sun8i-h2-plus-orangepi-zero.dtb \
+--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-p2-zero.dts
+@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * Based on sun8i-h2-plus-bananapi-m2-zero.dts, which is:
+ *   Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Banana Pi BPI-P2-Zero";
+	compatible = "sinovoip,bpi-p2-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-p2-zero:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		sw4 {
+			label = "power";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&reg_vcc1v2>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	/*
+	 * On the production batch of this board the card detect GPIO is
+	 * high active (card inserted), although on the early samples it's
+	 * low active.
+	 */
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+
+};
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15",
+			"CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29",
+		"CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05",
+			"CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16",
+		"CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27",
+			"CON2-P40", "CON2-P38", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PB */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PC */
+		"CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24",
+			"CON2-P18", "", "", "CON2-P26",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "CSI-PWR-EN", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PE */
+		"CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07",
+			"CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20",
+		"CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12",
+			"CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+			"SDC0-D2", "SDC0-DET", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PG */
+		"WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1",
+			"WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX",
+		"BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP",
+			"BT-RST-N", "AP-WAKE-BT", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36",
+			"VCC-IO-EN", "USB0-ID", "WL-PWR-EN",
+		"PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	/*
+	 * There're two micro-USB connectors, one is power-only and another is
+	 * OTG. The Vbus of these two connectors are connected together, so
+	 * the external USB device will be powered just by the power input
+	 * from the power-only USB port.
+	 */
+	status = "okay";
+};
--- a/target/linux/sunxi/patches-5.10/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch
+++ b/target/linux/sunxi/patches-5.10/430-arm64-dts-allwinner-a64-olinuxino-add-status-LED-ali.patch
--- a/target/linux/sunxi/patches-5.10/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
+++ b/target/linux/sunxi/patches-5.10/442-arm64-dts-orangepi-one-plus-enable-PWM.patch
--- a/target/linux/sunxi/patches-5.10/450-arm64-dts-enable-wifi-on-pine64-boards.patch
+++ b/target/linux/sunxi/patches-5.10/450-arm64-dts-enable-wifi-on-pine64-boards.patch
--- a/target/linux/sunxi/profiles/00-default.mk
+++ b/target/linux/sunxi/profiles/00-default.mk
@ -13,7 +13,7 @@ define Profile/Default
 	kmod-sun4i-emac \
 	rtl8188eu-firmware \
 	swconfig \
-	wpad-basic-wolfssl
+	wpad-basic-mbedtls
  PRIORITY := 1
 endef