From 51143b4c7571f717afe071db60bbb4db1532cbf2 Mon Sep 17 00:00:00 2001 From: coolsnowwolf Date: Fri, 3 Jul 2020 15:38:30 +0800 Subject: [PATCH] ipq40xx: add G-DOCK 2.0 (P&W R619AC) v5.4 support --- .../ipq40xx/base-files/etc/board.d/02_network | 6 +- .../etc/hotplug.d/firmware/11-ath10k-caldata | 4 + .../base-files/lib/upgrade/platform.sh | 4 +- .../arm/boot/dts/qcom-ipq4019-r619ac-128m.dts | 18 + .../arch/arm/boot/dts/qcom-ipq4019-r619ac.dts | 12 + .../arm/boot/dts/qcom-ipq4019-r619ac.dtsi | 322 ++++++++++++++++++ target/linux/ipq40xx/image/Makefile | 29 ++ .../901-arm-boot-add-dts-files.patch | 4 +- .../901-arm-boot-add-dts-files.patch | 4 +- 9 files changed, 399 insertions(+), 4 deletions(-) create mode 100644 target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts create mode 100644 target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dts create mode 100644 target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 1c645c744..72b96cd47 100755 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -44,6 +44,8 @@ ipq40xx_setup_interfaces() ;; asus,rt-acrh17|\ asus,rt-ac58u|\ + p2w,r619ac-128m|\ + p2w,r619ac|\ zyxel,nbg6617) ucidef_set_interfaces_lan_wan "eth0" "eth1" ucidef_add_switch "switch0" \ @@ -115,7 +117,9 @@ ipq40xx_setup_macs() label_mac=$(mtd_get_mac_binary "ART" 0x1006) ;; asus,rt-acrh17|\ - asus,rt-ac58u) + asus,rt-ac58u|\ + p2w,r619ac-128m|\ + p2w,r619ac) CI_UBIPART=UBI_DEV wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006) lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006) diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 4e035f90c..7c8133094 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -56,6 +56,8 @@ case "$FIRMWARE" in glinet,gl-b1300 |\ linksys,ea6350v3 |\ mobipromo,cm520-79f |\ + p2w,r619ac-128m |\ + p2w,r619ac |\ qcom,ap-dk01.1-c1) caldata_extract "ART" 0x1000 0x2f20 ;; @@ -145,6 +147,8 @@ case "$FIRMWARE" in glinet,gl-b1300 |\ linksys,ea6350v3 |\ mobipromo,cm520-79f |\ + p2w,r619ac-128m |\ + p2w,r619ac |\ qcom,ap-dk01.1-c1) caldata_extract "ART" 0x5000 0x2f20 ;; diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh index 7a763d477..92f6747b4 100644 --- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh @@ -214,7 +214,9 @@ platform_do_upgrade() { CI_UBIPART="ubifs" askey_do_upgrade "$1" ;; - compex,wpj419) + compex,wpj419|\ + p2w,r619ac-128m|\ + p2w,r619ac) nand_do_upgrade "$1" ;; linksys,ea6350v3 |\ diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts new file mode 100644 index 000000000..b51378a7e --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019-r619ac.dtsi" + +/ { + model = "P&W R619AC 128M"; + compatible = "p2w,r619ac-128m"; + + chosen { + bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs"; + }; +}; + +&rootfs_part1 { + reg = <0x0 0x8000000>; +}; + +/delete-node/ &rootfs_part2; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dts new file mode 100644 index 000000000..31010dd17 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019-r619ac.dtsi" + +/ { + model = "P&W R619AC"; + compatible = "p2w,r619ac"; + + chosen { + bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs"; + }; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi new file mode 100644 index 000000000..81018dd05 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + label-mac-device = &gmac0; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + }; + + usb3@8af8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led_sys: sys { + label = "r619ac:blue:sys"; + gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; + }; + + wlan2g { + label = "r619ac:blue:wlan2g"; + gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g { + label = "r619ac:blue:wlan5g"; + gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "MIBIB"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "QSEE"; + reg = <0x60000 0x60000>; + read-only; + }; + + partition@c0000 { + label = "CDT"; + reg = <0xc0000 0x10000>; + read-only; + }; + + partition@d0000 { + label = "DDRPARAMS"; + reg = <0xd0000 0x10000>; + read-only; + }; + + partition@e0000 { + label = "APPSBLENV"; + reg = <0xe0000 0x10000>; + read-only; + }; + + partition@f0000 { + label = "APPSBL"; + reg = <0xf0000 0x80000>; + read-only; + }; + + partition@1 { + label = "Bootloader"; + reg = <0x0 0x170000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x170000 0x10000>; + read-only; + }; + + partition@180000 { + label = "unused"; + reg = <0x180000 0xe80000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&nand { + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + rootfs_part1: partition@0 { + label = "rootfs"; + reg = <0x0 0x4000000>; + }; + + rootfs_part2: partition@4000000 { + label = "unused1"; + reg = <0x4000000 0x4000000>; + }; + }; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&sdhci { + pinctrl-0 = <&sd_0_pins>; + pinctrl-names = "default"; + vqmmc-supply = <&vqmmc>; + status = "okay"; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + sd_0_pins: sd_0_pinmux { + mux_1 { + pins = "gpio23", "gpio24", "gpio25", "gpio26", "gpio28"; + function = "sdio"; + drive-strength = <10>; + }; + + mux_2 { + pins = "gpio27"; + function = "sdio"; + drive-strength = <16>; + }; + }; + + serial_0_pins: serial0-pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + led_pins: led_pinmux { + mux { + pins = "gpio32", "gpio39", "gpio50"; + function = "gpio"; + bias-pull-up; + output-low; + }; + + mux_1 { + pins = "gpio52"; + function = "gpio"; + bias-pull-up; + output-high; + }; + + mux_2 { + pins = "gpio61"; + function = "gpio"; + bias-pull-down; + output-high; + }; + }; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&vqmmc { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "R619AC"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "R619AC"; +}; diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index c0277f050..a75ef8a1a 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -622,6 +622,35 @@ define Device/qcom_ap-dk04.1-c1 endef TARGET_DEVICES += qcom_ap-dk04.1-c1 +define Device/p2w_r619ac + $(call Device/FitzImage) + $(call Device/UbiFit) + DEVICE_VENDOR := P&W + DEVICE_MODEL := R619AC + SOC := qcom-ipq4019 + DEVICE_DTS_CONFIG := config@10 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGES += nand-factory.bin + IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand + DEVICE_PACKAGES := ipq-wifi-p2w_r619ac +endef +TARGET_DEVICES += p2w_r619ac + +define Device/p2w_r619ac-128m + $(call Device/FitzImage) + $(call Device/UbiFit) + DEVICE_VENDOR := P&W + DEVICE_MODEL := R619AC + DEVICE_VARIANT := 128M + SOC := qcom-ipq4019 + DEVICE_DTS_CONFIG := config@10 + BLOCKSIZE := 128k + PAGESIZE := 2048 + DEVICE_PACKAGES := ipq-wifi-p2w_r619ac +endef +TARGET_DEVICES += p2w_r619ac-128m + define Device/qxwlan_e2600ac-c1 $(call Device/FitImage) DEVICE_VENDOR := Qxwlan diff --git a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch index 41fd69ab5..a11d82383 100644 --- a/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -785,11 +785,48 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -785,11 +785,50 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -44,6 +44,8 @@ Signed-off-by: John Crispin + qcom-ipq4019-ea8300.dtb \ + qcom-ipq4019-habanero-dvk.dtb \ + qcom-ipq4019-map-ac2200.dtb \ ++ qcom-ipq4019-r619ac.dtb \ ++ qcom-ipq4019-r619ac-128m.dtb \ + qcom-ipq4019-e2600ac-c1.dtb \ + qcom-ipq4019-e2600ac-c2.dtb \ + qcom-ipq4019-rtl30vw.dtb \ diff --git a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch index ba4de0f6d..32c0a0e99 100644 --- a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -837,11 +837,49 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -837,11 +837,51 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -43,6 +43,8 @@ Signed-off-by: John Crispin + qcom-ipq4019-fritzbox-7530.dtb \ + qcom-ipq4019-fritzrepeater-1200.dtb \ + qcom-ipq4019-fritzrepeater-3000.dtb \ ++ qcom-ipq4019-r619ac.dtb \ ++ qcom-ipq4019-r619ac-128m.dtb \ + qcom-ipq4019-map-ac2200.dtb \ + qcom-ipq4019-e2600ac-c1.dtb \ + qcom-ipq4019-e2600ac-c2.dtb \