kernel: bump 5.10 to 5.10.110 (#9214)

Removed upstreamed:
  generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch
  generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch
  ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch

All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200
Compile-/run-tested: ath79/generic (Archer C7 v2).

Signed-off-by: John Audia <graysky@archlinux.us>

Co-authored-by: John Audia <graysky@archlinux.us>
This commit is contained in:
Beginner 2022-04-10 14:48:51 +08:00 committed by GitHub
parent 4b0c64e913
commit 4d545eaed7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
25 changed files with 41 additions and 41 deletions

View File

@ -1,2 +1,2 @@
LINUX_VERSION-5.10 = .109
LINUX_KERNEL_HASH-5.10.109 = 18fb22ecb249669ea775474aee614dcb0697cab299068074fd9f0bafa32113dc
LINUX_VERSION-5.10 = .110
LINUX_KERNEL_HASH-5.10.110 = dbef6a06325433481551cb8cfca9254d908d0ae950bc809f3da8ade00c485693

View File

@ -23,7 +23,7 @@ produce a noisy warning.
xhci->quirks |= XHCI_RESET_ON_RESUME;
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -427,10 +427,14 @@ static int xhci_try_enable_msi(struct us
@@ -425,10 +425,14 @@ static int xhci_try_enable_msi(struct us
free_irq(hcd->irq, hcd);
hcd->irq = 0;
@ -43,7 +43,7 @@ produce a noisy warning.
hcd->msi_enabled = 1;
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1892,6 +1892,7 @@ struct xhci_hcd {
@@ -1895,6 +1895,7 @@ struct xhci_hcd {
struct xhci_hub usb2_rhub;
struct xhci_hub usb3_rhub;
/* support xHCI 1.0 spec USB2 hardware LPM */

View File

@ -14,7 +14,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -8596,8 +8596,6 @@ int alloc_contig_range(unsigned long sta
@@ -8603,8 +8603,6 @@ int alloc_contig_range(unsigned long sta
/* Make sure the range is really isolated. */
if (test_pages_isolated(outer_start, end, 0)) {

View File

@ -12442,7 +12442,7 @@ Signed-off-by: Joerg Schambacher joerg@i2audio.com
depends on I2C
select SND_SOC_AD193X
@@ -804,7 +808,7 @@ config SND_SOC_HDAC_HDA
@@ -809,7 +813,7 @@ config SND_SOC_HDAC_HDA
select SND_HDA
config SND_SOC_ICS43432
@ -12451,7 +12451,7 @@ Signed-off-by: Joerg Schambacher joerg@i2audio.com
config SND_SOC_INNO_RK3036
tristate "Inno codec driver for RK3036 SoC"
@@ -825,6 +829,13 @@ config SND_SOC_LOCHNAGAR_SC
@@ -830,6 +834,13 @@ config SND_SOC_LOCHNAGAR_SC
This driver support the sound card functionality of the Cirrus
Logic Lochnagar audio development board.
@ -12465,7 +12465,7 @@ Signed-off-by: Joerg Schambacher joerg@i2audio.com
config SND_SOC_MADERA
tristate
default y if SND_SOC_CS47L15=y
@@ -1125,6 +1136,10 @@ config SND_SOC_RT5616
@@ -1130,6 +1141,10 @@ config SND_SOC_RT5616
tristate "Realtek RT5616 CODEC"
depends on I2C
@ -12476,7 +12476,7 @@ Signed-off-by: Joerg Schambacher joerg@i2audio.com
config SND_SOC_RT5631
tristate "Realtek ALC5631/RT5631 CODEC"
depends on I2C
@@ -1346,6 +1361,9 @@ config SND_SOC_TFA9879
@@ -1351,6 +1366,9 @@ config SND_SOC_TFA9879
tristate "NXP Semiconductors TFA9879 amplifier"
depends on I2C
@ -12486,7 +12486,7 @@ Signed-off-by: Joerg Schambacher joerg@i2audio.com
config SND_SOC_TLV320AIC23
tristate
@@ -1784,4 +1802,8 @@ config SND_SOC_TPA6130A2
@@ -1789,4 +1807,8 @@ config SND_SOC_TPA6130A2
tristate "Texas Instruments TPA6130A2 headphone amplifier"
depends on I2C

View File

@ -15,7 +15,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1474,6 +1474,103 @@ command_cleanup:
@@ -1472,6 +1472,103 @@ command_cleanup:
}
/*
@ -119,7 +119,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
* non-error returns are a promise to giveback() the urb later
* we drop ownership so next owner (or urb unlink) can get it
*/
@@ -5380,6 +5477,7 @@ static const struct hc_driver xhci_hc_dr
@@ -5378,6 +5475,7 @@ static const struct hc_driver xhci_hc_dr
.endpoint_reset = xhci_endpoint_reset,
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,

View File

@ -47,7 +47,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
val);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1653,8 +1653,8 @@ struct urb_priv {
@@ -1656,8 +1656,8 @@ struct urb_priv {
* Each segment table entry is 4*32bits long. 1K seems like an ok size:
* (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
* meaning 64 ring segments.

View File

@ -14,7 +14,7 @@ Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -313,6 +313,9 @@ static void bcm54xx_adjust_rxrefclk(stru
@@ -314,6 +314,9 @@ static void bcm54xx_adjust_rxrefclk(stru
static int bcm54xx_config_init(struct phy_device *phydev)
{
int reg, err, val;
@ -24,7 +24,7 @@ Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
reg = phy_read(phydev, MII_BCM54XX_ECR);
if (reg < 0)
@@ -368,6 +371,8 @@ static int bcm54xx_config_init(struct ph
@@ -369,6 +372,8 @@ static int bcm54xx_config_init(struct ph
bcm54xx_phydsp_config(phydev);
@ -33,7 +33,7 @@ Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
/* Encode link speed into LED1 and LED3 pair (green/amber).
* Also flash these two LEDs on activity. This means configuring
* them for MULTICOLOR and encoding link/activity into them.
@@ -377,8 +382,8 @@ static int bcm54xx_config_init(struct ph
@@ -378,8 +383,8 @@ static int bcm54xx_config_init(struct ph
bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
val = BCM_LED_MULTICOLOR_IN_PHASE |

View File

@ -11,7 +11,7 @@ releases.
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -314,7 +314,7 @@ static int bcm54xx_config_init(struct ph
@@ -315,7 +315,7 @@ static int bcm54xx_config_init(struct ph
{
int reg, err, val;
u32 led_modes[] = {BCM_LED_MULTICOLOR_LINK_ACT,
@ -20,7 +20,7 @@ releases.
struct device_node *np = phydev->mdio.dev.of_node;
reg = phy_read(phydev, MII_BCM54XX_ECR);
@@ -373,10 +373,6 @@ static int bcm54xx_config_init(struct ph
@@ -374,10 +374,6 @@ static int bcm54xx_config_init(struct ph
of_property_read_u32_array(np, "led-modes", led_modes, 2);

View File

@ -51,7 +51,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1885,6 +1885,7 @@ struct xhci_hcd {
@@ -1888,6 +1888,7 @@ struct xhci_hcd {
#define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)
#define XHCI_NO_SOFT_RETRY BIT_ULL(40)
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)

View File

@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -510,8 +510,8 @@
@@ -560,8 +560,8 @@
msi-controller;
msi-parent = <&pcie0>;

View File

@ -16,7 +16,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -252,7 +252,8 @@ static void bcm54xx_adjust_rxrefclk(stru
@@ -253,7 +253,8 @@ static void bcm54xx_adjust_rxrefclk(stru
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M &&
BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810 &&
@ -26,7 +26,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
return;
val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
@@ -763,13 +764,21 @@ static struct phy_driver broadcom_driver
@@ -784,13 +785,21 @@ static struct phy_driver broadcom_driver
.config_intr = bcm_phy_config_intr,
}, {
.phy_id = PHY_ID_BCM54210E,
@ -49,7 +49,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
.phy_id = PHY_ID_BCM5461,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5461",
@@ -925,7 +934,8 @@ module_phy_driver(broadcom_drivers);
@@ -946,7 +955,8 @@ module_phy_driver(broadcom_drivers);
static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
{ PHY_ID_BCM5411, 0xfffffff0 },
{ PHY_ID_BCM5421, 0xfffffff0 },

View File

@ -10,7 +10,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -82,6 +82,11 @@ static int bcm54210e_config_init(struct
@@ -83,6 +83,11 @@ static int bcm54210e_config_init(struct
return 0;
}
@ -22,7 +22,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
static int bcm54612e_config_init(struct phy_device *phydev)
{
int reg;
@@ -357,6 +362,9 @@ static int bcm54xx_config_init(struct ph
@@ -358,6 +363,9 @@ static int bcm54xx_config_init(struct ph
case PHY_ID_BCM54616S:
err = bcm54616s_config_init(phydev);
break;

View File

@ -13,7 +13,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -561,6 +561,7 @@
@@ -611,6 +611,7 @@
&dsi1 {
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;

View File

@ -22,7 +22,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech>
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -6528,9 +6528,7 @@ void amdgpu_dm_connector_init_helper(str
@@ -6531,9 +6531,7 @@ void amdgpu_dm_connector_init_helper(str
if (connector_type == DRM_MODE_CONNECTOR_HDMIA ||
connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
connector_type == DRM_MODE_CONNECTOR_eDP) {

View File

@ -254,7 +254,7 @@ Signed-off-by: Maxime Ripard <maxime@cerno.tech>
* clk_get_parent - return the parent of a clk
* @clk: the clk whose parent gets returned
*
@@ -3838,6 +3958,7 @@ __clk_register(struct device *dev, struc
@@ -3851,6 +3971,7 @@ __clk_register(struct device *dev, struc
goto fail_parents;
INIT_HLIST_HEAD(&core->clks);

View File

@ -23,7 +23,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
status = "disabled";
};
@@ -1115,7 +1115,3 @@
@@ -1165,7 +1165,3 @@
&usb {
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
};

View File

@ -33,7 +33,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
enum udp_conntrack {
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -1438,6 +1438,11 @@ void nf_conntrack_tcp_init_net(struct ne
@@ -1447,6 +1447,11 @@ void nf_conntrack_tcp_init_net(struct ne
tn->tcp_loose = nf_ct_tcp_loose;
tn->tcp_be_liberal = nf_ct_tcp_be_liberal;
tn->tcp_max_retrans = nf_ct_tcp_max_retrans;

View File

@ -62,7 +62,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
+MODULE_LICENSE("GPL");
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3065,6 +3065,7 @@ int wake_up_state(struct task_struct *p,
@@ -3066,6 +3066,7 @@ int wake_up_state(struct task_struct *p,
{
return try_to_wake_up(p, state, 0);
}

View File

@ -8,7 +8,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -1192,6 +1192,73 @@ static struct mtd_info * __init open_mtd
@@ -1185,6 +1185,73 @@ static struct mtd_info * __init open_mtd
return mtd;
}
@ -82,7 +82,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
static int __init ubi_init(void)
{
int err, i, k;
@@ -1275,6 +1342,12 @@ static int __init ubi_init(void)
@@ -1268,6 +1335,12 @@ static int __init ubi_init(void)
}
}

View File

@ -45,7 +45,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
if (ret < 0)
goto out;
@@ -565,6 +571,17 @@ full_scan:
@@ -567,6 +573,17 @@ full_scan:
return err;
}

View File

@ -28,7 +28,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
/*
* Get the required data from the packet.
*/
@@ -1130,7 +1136,7 @@ int nf_conntrack_tcp_packet(struct nf_co
@@ -1139,7 +1145,7 @@ int nf_conntrack_tcp_packet(struct nf_co
IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED &&
timeouts[new_state] > timeouts[TCP_CONNTRACK_UNACK])
timeout = timeouts[TCP_CONNTRACK_UNACK];

View File

@ -17,7 +17,7 @@ Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -5484,6 +5484,7 @@ static int mv88e6xxx_register_switch(str
@@ -5485,6 +5485,7 @@ static int mv88e6xxx_register_switch(str
ds->ops = &mv88e6xxx_switch_ops;
ds->ageing_time_min = chip->info->age_time_coeff;
ds->ageing_time_max = chip->info->age_time_coeff * U8_MAX;

View File

@ -33,7 +33,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
/*
* The Mellanox Tavor device gives false positive parity errors. Mark this
* device with a broken_parity_status to allow PCI scanning code to "skip"
@@ -3323,6 +3324,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
@@ -3335,6 +3336,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
@ -42,7 +42,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
/*
* Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
* To work around this, query the size it should be configured to by the
@@ -3348,6 +3351,8 @@ static void quirk_intel_ntb(struct pci_d
@@ -3360,6 +3363,8 @@ static void quirk_intel_ntb(struct pci_d
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
@ -51,7 +51,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled, even
* though no one is handling them (e.g., if the i915 driver is never
@@ -3386,6 +3391,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
@@ -3398,6 +3403,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);

View File

@ -5481,7 +5481,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
(transaction layer end-to-end CRC checking).
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1419,6 +1419,8 @@ void pci_walk_bus(struct pci_bus *top, i
@@ -1420,6 +1420,8 @@ void pci_walk_bus(struct pci_bus *top, i
void *userdata);
int pci_cfg_space_size(struct pci_dev *dev);
unsigned char pci_bus_max_busnr(struct pci_bus *bus);

View File

@ -19,7 +19,7 @@
},
[PORT_NPCM] = {
.name = "Nuvoton 16550",
@@ -2725,6 +2725,11 @@ serial8250_do_set_termios(struct uart_po
@@ -2735,6 +2735,11 @@ serial8250_do_set_termios(struct uart_po
unsigned long flags;
unsigned int baud, quot, frac = 0;