ramips: add support for OpenFi 5Pro (#12196)

OpenFi 5Pro is a 2.4/5 GHz band 11ac router, based on MT7621A.

Specification:

- SoC               : MediaTek MT7621A
- RAM               : DDR3 512 MB
- Flash             : SPI-NOR 64MB (W25Q512)
- WLAN              : 2.4/5 GHz 2T2R (MT7603/MT7613)
- Ethernet          : 2x 10/100/1000 Mbps
- LEDs/Keys (GPIO)  : 3x/2x
- UART              : 1xUART
  - settings        : 115200n8

How to upgrade image in uboot:

1. press reset button when boot for 5sec.
2. access 192.168.21.1 in web ui.
3. select image and upload
This commit is contained in:
Sven Huang 2024-05-28 23:30:02 +08:00 committed by GitHub
parent d447f22e74
commit 4561705e1b
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
3 changed files with 163 additions and 0 deletions

View File

@ -0,0 +1,153 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "openfi,5pro", "mediatek,mt7621-soc";
model = "OpenFi 5Pro";
aliases {
led-boot = &led_system_blue;
led-failsafe = &led_system_blue;
led-running = &led_system_blue;
led-upgrade = &led_system_blue;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_system_blue: led-0 {
label = "blue:system";
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_internet_blue: led-1 {
label = "blue:internet";
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
led_wifi_blue: led-2 {
label = "blue:wifi";
color = <LED_COLOR_ID_BLUE>;
linux,default-trigger = "phy0tpt";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <45000000>;
broken-flash-reset;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3f00000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
wifi1: mt76@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&gmac0 {
mtd-mac-address = <&factory 0xe000>;
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "wan";
mtd-mac-address = <&factory 0xe006>;
};
port@1 {
status = "okay";
label = "lan";
};
};
};
&state_default {
gpio {
groups = "wdt", "i2c", "jtag";
function = "gpio";
};
};

View File

@ -1401,6 +1401,15 @@ define Device/netis_wf2881
endef
TARGET_DEVICES += netis_wf2881
define Device/openfi_5pro
$(Device/dsa-migration)
IMAGE_SIZE := 63448k
DEVICE_VENDOR := OpenFi
DEVICE_MODEL := 5Pro
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap kmod-usb3
endef
TARGET_DEVICES += openfi_5pro
define Device/oraybox_x3a
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)

View File

@ -30,6 +30,7 @@ ramips_setup_interfaces()
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
;;
asiarf,ap7621-001|\
openfi,5pro|\
winstars,ws-wn583a6)
ucidef_set_interfaces_lan_wan "lan" "wan"
;;