298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-16 04:13:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

ipq40xx: switch to kernel 5.10

Browse Source
This commit is contained in:
lean 2023-09-09 23:36:45 +08:00
parent 61d090cddb
commit 34ac92f6cc
163 changed files with 8781 additions and 7546 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
target/linux/ipq40xx/Makefile
View File

@ -6,9 +6,10 @@ BOARDNAME:=Qualcomm Atheros IPQ40XX
FEATURES:=squashfs fpu ramdisk nand
CPU_TYPE:=cortex-a7
CPU_SUBTYPE:=neon-vfpv4
MAINTAINER:=John Crispin <john@phrozen.org>
SUBTARGETS:=generic mikrotik
KERNEL_PATCHVER:=5.4
KERNEL_PATCHVER:=5.10
KERNEL_TESTING_PATCHVER:=5.10
KERNELNAME:=zImage Image dtbs
@ -16,10 +17,8 @@ include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
kmod-usb-dwc3-qcom \
kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
kmod-ath10k-ct wpad-openssl uboot-envtools \
kmod-ath10k-ct wpad-basic-wolfssl \
kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct \
autocore-arm automount autosamba ethtool htop \
luci-app-adbyby-plus luci-app-cpufreq luci-app-ipsec-vpnd \
luci-app-unblockmusic luci-app-zerotier
uboot-envtools
$(eval $(call BuildTarget))

89
target/linux/ipq40xx/base-files/etc/board.d/01_leds Executable file → Normal file
View File

@ -1,4 +1,3 @@
#!/bin/sh
#
# Copyright (C) 2015 OpenWrt.org
#
@ -11,79 +10,91 @@ board=$(board_name)
case "$board" in
alfa-network,ap120c-ac)
ucidef_set_led_switch "wan" "WAN" "amber:wan" "switch0" "0x20"
ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
;;
asus,rt-ac42u)
ucidef_set_led_switch "lan1" "LAN1" "blue:lan-1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "blue:lan-2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "blue:lan-3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "blue:lan-4" "switch0" "0x10"
;;
asus,rt-ac58u)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2G" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5G" "phy1tpt"
ucidef_set_led_switch "wan" "WAN" "blue:wan" "switch0" "0x20"
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
;;
asus,rt-acrh17)
ucidef_set_led_default "status" "STATUS" "blue:status" "1"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy0tpt"
ucidef_set_led_switch "wan" "WAN(blue)" "blue:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "blue:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "blue:lan4" "switch0" "0x10"
;;
avm,fritzbox-4040)
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
ucidef_set_led_switch "wan" "WAN" "green:wan" "switch0" "0x20"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
;;
avm,fritzbox-7530 |\
glinet,gl-b1300)
glinet,gl-b1300 |\
mikrotik,lhgg-60ad)
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
;;
century,wr142ac |\
century,wr142ac-nand)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
edgecore,oap100)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
;;
engenius,eap1300)
ucidef_set_led_switch "wan" "WAN" "amber:wan" "switch0" "0x20"
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
;;
engenius,eap2200)
ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x20"
ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
;;
engenius,ens620ext)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2G" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5G" "phy1tpt"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
;;
glinet,gl-ap1300)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
;;
mikrotik,cap-ac)
ucidef_set_led_default "power" "POWER" "blue:power" "1"
ucidef_set_led_default "user" "USER" "green:user" "0"
ucidef_set_led_switch "eth1" "ETH1" "green:eth1" "switch0" "0x20"
ucidef_set_led_switch "eth2" "ETH2" "green:eth2" "switch0" "0x10"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
;;
mikrotik,hap-ac3)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x20"
ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x02"
ucidef_set_led_gpio "poe" "POE" "red:poe" "452" "0"
;;
mikrotik,sxtsq-5-ac)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "21" "100"
ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "41" "100"
ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "61" "100"
ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "81" "100"
;;
mobipromo,cm520-79f)
ucidef_set_led_switch "wan" "WAN" "blue:wan" "switch0" "0x20"
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08"
;;
netgear,ex6100v2 |\
netgear,ex6150v2 |\
netgear,ex6200v2)
netgear,ex6150v2)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
;;
p2w,r619ac |\
p2w,r619ac-128m)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
;;
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
;;
zyxel,nbg6617)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2G" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5G" "phy1tpt"
;;
zyxel,nbg6617 |\
zyxel,wre6606)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"

209
target/linux/ipq40xx/base-files/etc/board.d/02_network Executable file → Normal file
View File

@ -1,4 +1,3 @@
#!/bin/sh
#
# Copyright (c) 2015 The Linux Foundation. All rights reserved.
# Copyright (c) 2011-2015 OpenWrt.org
@ -16,94 +15,145 @@ ipq40xx_setup_interfaces()
8dev,jalapeno|\
alfa-network,ap120c-ac|\
engenius,emr3500|\
engenius,ens620ext)
ucidef_add_switch "switch0" \
"0t@eth0" "4:lan" "5:wan"
;;
asus,map-ac2200|\
cilab,meshpoint-one|\
openmesh,a42|\
openmesh,a62)
ucidef_add_switch "switch0" \
"0t@eth0" "5:lan" "4:wan"
;;
aruba,ap-303h|\
asus,rt-acrh17|\
asus,rt-ac58u|\
avm,fritzbox-4040|\
century,wr142ac|\
century,wr142ac-nand|\
ezviz,cs-w3-wd1200g-eup|\
linksys,ea6350v3|\
linksys,ea8300|\
unielec,u4019-32m)
ucidef_add_switch "switch0" \
"0t@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
avm,fritzrepeater-3000|\
compex,wpj419|\
compex,wpj428|\
engenius,eap1300|\
engenius,eap2200)
ucidef_add_switch "switch0" \
"0t@eth0" "4:lan" "5:lan"
;;
avm,fritzbox-7530)
ucidef_add_switch "switch0" \
"0t@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
engenius,ens620ext|\
luma,wrtq-329acn|\
netgear,wac510|\
plasmacloud,pa1200|\
plasmacloud,pa2200)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
aruba,ap-303|\
aruba,ap-365|\
avm,fritzrepeater-1200|\
dlink,dap-2610 |\
engenius,eap1300|\
engenius,emd1|\
meraki,mr33|\
mikrotik,lhgg-60ad|\
mikrotik,sxtsq-5-ac|\
netgear,ex6100v2|\
netgear,ex6150v2|\
zyxel,wre6606)
ucidef_set_interface_lan "eth0"
;;
buffalo,wtr-m2133hp)
aruba,ap-303h|\
teltonika,rutx10)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
;;
asus,map-ac2200|\
cilab,meshpoint-one|\
edgecore,ecw5211|\
edgecore,oap100|\
openmesh,a42|\
openmesh,a62)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
mikrotik,cap-ac)
ucidef_add_switch "switch0" \
"0t@eth0" "4:lan" "5:wan"
;;
asus,rt-ac42u|\
asus,rt-ac58u|\
mikrotik,hap-ac2|\
mikrotik,hap-ac3|\
p2w,r619ac-64m|\
p2w,r619ac-128m|\
zyxel,nbg6617)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
avm,fritzbox-4040|\
linksys,ea6350v3|\
linksys,ea8300)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
;;
linksys,mr8300)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
;;
avm,fritzbox-7530)
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
avm,fritzrepeater-3000)
ucidef_add_switch "switch0" \
"0u@eth0" "4:lan:1" "5:lan:2"
;;
compex,wpj419|\
compex,wpj428|\
engenius,eap2200)
ucidef_set_interface_lan "eth0 eth1"
;;
buffalo,wtr-m2133hp)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
;;
cellc,rtl30vw)
ucidef_set_interface_lan "eth0"
ucidef_add_switch "switch0" \
"0t@eth0" "3:lan" "4:lan"
"0u@eth0" "3:lan" "4:lan"
;;
glinet,gl-a1300|\
glinet,gl-b1300|\
glinet,gl-s1300|\
qxwlan,e2600ac-c1|\
qxwlan,e2600ac-c2)
ucidef_add_switch "switch0" \
"0t@eth0" "3:lan" "4:lan" "5:wan"
devolo,magic-2-wifi-next)
ucidef_set_interface_lan "eth0 eth1 eth2"
;;
hiwifi,c526a|\
zte,mf263)
ezviz,cs-w3-wd1200g-eup)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:wan"
"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
;;
leguang,ca100)
glinet,gl-ap1300 |\
glinet,gl-b1300 |\
glinet,gl-s1300)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0t@eth0" "3:lan" "5:wan"
"0u@eth0" "3:lan" "4:lan"
;;
glinet,gl-b2200)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan" "2:lan" "3:lan" "5:lan" "0u@eth1" "4:wan"
;;
mobipromo,cm520-79f)
ucidef_add_switch "switch0" \
"0t@eth0" "3:lan:2" "4:lan:1" "5:wan"
"0u@eth0" "3:lan:2" "4:lan:1"
ucidef_set_interface_wan "eth1"
;;
netgear,ex6100v2|\
netgear,ex6150v2)
netgear,rbr50|\
netgear,rbs50|\
netgear,srr60|\
netgear,srs60)
ucidef_add_switch "switch0" \
"0u@eth0" "4:lan"
"0u@eth0" "2:lan" "3:lan" "4:lan"
ucidef_set_interface_wan "eth1"
;;
netgear,ex6200v2)
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0t@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
"0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
;;
p2w,r619ac|\
p2w,r619ac-128m|\
zyxel,nbg6617)
unielec,u4019-32m |\
tel,x1pro)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0t@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan:5"
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
;;
zte,mf286d)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "0u@eth1" "5:wan"
;;
zte,mf289f)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "5:lan:2" "0u@eth1" "2:wan"
;;
*)
echo "Unsupported hardware. Network interfaces not initialized"
@ -122,20 +172,18 @@ ipq40xx_setup_macs()
8dev,habanero-dvk)
label_mac=$(mtd_get_mac_binary "ART" 0x1006)
;;
asus,rt-acrh17|\
asus,rt-ac58u)
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 1)
label_mac=$lan_mac
;;
century,wr142ac|\
century,wr142ac-nand)
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" -1)
wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
label_mac=$wan_mac
;;
cilab,meshpoint-one)
label_mac=$(mtd_get_mac_binary "ART" 0x1006)
;;
devolo,magic-2-wifi-next)
lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
label_mac=$lan_mac
;;
dlink,dap-2610)
lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
label_mac=$lan_mac
@ -157,22 +205,21 @@ ipq40xx_setup_macs()
ezviz,cs-w3-wd1200g-eup)
label_mac=$(mtd_get_mac_binary "ART" 0x6)
;;
hiwifi,c526a)
lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
linksys,ea6350v3)
wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
p2w,r619ac|\
p2w,r619ac-128m)
wan_mac=$(cat /sys/class/net/eth0/address)
lan_mac=$(macaddr_add "$wan_mac" 1)
mikrotik,cap-ac |\
mikrotik,hap-ac2|\
mikrotik,hap-ac3)
wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
lan_mac=$(macaddr_add $wan_mac 1)
label_mac="$wan_mac"
;;
zte,mf263)
wan_mac=$(mtd_get_mac_binary mac 0x0)
lan_mac=$(macaddr_add "$wan_mac" 1)
mikrotik,lhgg-60ad|\
mikrotik,sxtsq-5-ac)
lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
label_mac="$lan_mac"
;;
esac

11
target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches Executable file → Normal file
View File

@ -1,4 +1,3 @@
#!/bin/sh
. /lib/functions/uci-defaults.sh
@ -19,6 +18,16 @@ cilab,meshpoint-one)
compex,wpj428)
ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
;;
mikrotik,cap-ac)
ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "414" "0"
;;
mikrotik,hap-ac3)
ucidef_add_gpio_switch "poe_passtrough" "PoE Passthrough" "452" "0"
;;
zte,mf286d|\
zte,mf289f)
ucidef_add_gpio_switch "power_btn_block" "Power button blocker" "421" "0"
;;
esac
board_config_flush

207
target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -12,7 +12,7 @@ case "$FIRMWARE" in
meraki,mr33)
caldata_extract_ubi "ART" 0x9000 0x844
caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
;;
esac
;;
@ -23,8 +23,7 @@ case "$FIRMWARE" in
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
asus,rt-acrh17)
CI_UBIPART=UBI_DEV
asus,rt-ac42u)
caldata_extract_ubi "Factory" 0x9000 0x2f20
;;
avm,fritzrepeater-3000)
@ -35,52 +34,33 @@ case "$FIRMWARE" in
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
buffalo,wtr-m2133hp)
caldata_extract "ART" 0x9000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
;;
engenius,eap2200 |\
openmesh,a62)
openmesh,a62 |\
plasmacloud,pa2200)
caldata_extract "0:ART" 0x9000 0x2f20
;;
linksys,ea8300)
linksys,ea8300 |\
linksys,mr8300)
caldata_extract "ART" 0x9000 0x2f20
# OEM assigns 4 sequential MACs
ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
;;
netgear,rbr50|\
netgear,rbs50|\
netgear,srr60|\
netgear,srs60)
caldata_extract_mmc "0:ART" 0x9000 0x2f20
ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
;;
esac
;;
"ath10k/pre-cal-ahb-a000000.wifi.bin")
case "$board" in
8dev,habanero-dvk |\
8dev,jalapeno |\
alfa-network,ap120c-ac |\
century,wr142ac |\
century,wr142ac-nand |\
cilab,meshpoint-one |\
ezviz,cs-w3-wd1200g-eup |\
glinet,gl-b1300 |\
glinet,gl-s1300 |\
leguang,ca100 |\
linksys,ea6350v3 |\
mobipromo,cm520-79f |\
p2w,r619ac |\
p2w,r619ac-128m |\
qcom,ap-dk01.1-c1)
caldata_extract "ART" 0x1000 0x2f20
;;
aruba,ap-303 |\
aruba,ap-303h |\
aruba,ap-365)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
;;
asus,map-ac2200)
caldata_extract_ubi "Factory" 0x1000 0x2f20
;;
asus,rt-acrh17 |\
asus,map-ac2200|\
asus,rt-ac42u|\
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
caldata_extract_ubi "Factory" 0x1000 0x2f20
;;
avm,fritzbox-4040)
@ -96,22 +76,17 @@ case "$FIRMWARE" in
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
buffalo,wtr-m2133hp)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
;;
cellc,rtl30vw |\
compex,wpj419 |\
compex,wpj428 |\
engenius,eap1300 |\
engenius,eap2200 |\
openmesh,a42 |\
openmesh,a62 |\
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2 |\
unielec,u4019-32m)
plasmacloud,pa1200 |\
plasmacloud,pa2200)
caldata_extract "0:ART" 0x1000 0x2f20
;;
devolo,magic-2-wifi-next)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
;;
dlink,dap-2610)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
@ -126,30 +101,35 @@ case "$FIRMWARE" in
;;
engenius,ens620ext)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
;;
hiwifi,c526a)
linksys,ea8300 |\
linksys,mr8300)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii bdinfo "Vfac_mac ") +2)
;;
linksys,ea8300)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" +2)
ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
;;
meraki,mr33)
caldata_extract_ubi "ART" 0x1000 0x2f20
caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
;;
netgear,ex6100v2 |\
netgear,ex6150v2 |\
netgear,ex6200v2)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
mikrotik,cap-ac |\
mikrotik,hap-ac2 |\
mikrotik,hap-ac3)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
;;
zte,mf263)
netgear,rbr50|\
netgear,rbs50|\
netgear,srr60|\
netgear,srs60)
caldata_extract_mmc "0:ART" 0x1000 0x2f20
ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
;;
teltonika,rutx10)
caldata_extract "0:ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x0) +2)
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
@ -160,34 +140,11 @@ case "$FIRMWARE" in
;;
"ath10k/pre-cal-ahb-a800000.wifi.bin")
case "$board" in
8dev,habanero-dvk |\
8dev,jalapeno |\
alfa-network,ap120c-ac |\
century,wr142ac |\
century,wr142ac-nand |\
cilab,meshpoint-one |\
ezviz,cs-w3-wd1200g-eup |\
glinet,gl-b1300 |\
glinet,gl-s1300 |\
leguang,ca100 |\
linksys,ea6350v3 |\
mobipromo,cm520-79f |\
p2w,r619ac |\
p2w,r619ac-128m |\
qcom,ap-dk01.1-c1)
caldata_extract "ART" 0x5000 0x2f20
;;
aruba,ap-303 |\
aruba,ap-303h |\
aruba,ap-365)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
;;
asus,map-ac2200)
caldata_extract_ubi "Factory" 0x5000 0x2f20
;;
asus,map-ac2200|\
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
caldata_extract_ubi "Factory" 0x5000 0x2f20
;;
avm,fritzbox-4040)
@ -203,60 +160,61 @@ case "$FIRMWARE" in
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
buffalo,wtr-m2133hp)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
;;
cellc,rtl30vw |\
compex,wpj419 |\
compex,wpj428 |\
engenius,eap1300 |\
engenius,eap2200 |\
openmesh,a42 |\
openmesh,a62 |\
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2 |\
unielec,u4019-32m)
plasmacloud,pa1200 |\
plasmacloud,pa2200)
caldata_extract "0:ART" 0x5000 0x2f20
;;
devolo,magic-2-wifi-next)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
;;
dlink,dap-2610)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
;;
engenius,emd1)
caldata_extract "0:ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
;;
engenius,emr3500)
caldata_extract "0:ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
;;
engenius,ens620ext)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
;;
hiwifi,c526a)
linksys,ea8300 |\
linksys,mr8300)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii bdinfo "Vfac_mac ") +3)
;;
linksys,ea8300)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" +3)
ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
;;
meraki,mr33)
caldata_extract_ubi "ART" 0x5000 0x2f20
caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
;;
netgear,ex6100v2 |\
netgear,ex6150v2 |\
netgear,ex6200v2)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
mikrotik,cap-ac |\
mikrotik,hap-ac2 |\
mikrotik,hap-ac3 |\
mikrotik,sxtsq-5-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
;;
zte,mf263)
netgear,rbr50|\
netgear,rbs50|\
netgear,srr60|\
netgear,srs60)
caldata_extract_mmc "0:ART" 0x5000 0x2f20
ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
;;
teltonika,rutx10)
caldata_extract "0:ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x0) +3)
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
@ -265,6 +223,29 @@ case "$FIRMWARE" in
;;
esac
;;
"ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
case "$board" in
mikrotik,cap-ac |\
mikrotik,hap-ac2 |\
mikrotik,hap-ac3)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
;;
esac
;;
"ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
case "$board" in
mikrotik,cap-ac |\
mikrotik,hap-ac2 |\
mikrotik,hap-ac3 |\
mikrotik,sxtsq-5-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
;;
esac
;;
*)
exit 1
;;

21
target/linux/ipq40xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
View File

@ -1,21 +0,0 @@
#!/bin/ash
[ "$ACTION" = "add" ] || exit 0
PHYNBR=${DEVPATH##*/phy}
[ -n $PHYNBR ] || exit 0
. /lib/functions.sh
. /lib/functions/system.sh
board=$(board_name)
case "$board" in
hiwifi,c526a)
[ "$PHYNBR" -eq 0 ] && \
mtd_get_mac_ascii bdinfo "Vfac_mac " > /sys${DEVPATH}/macaddress
;;
*)
;;
esac

7
target/linux/ipq40xx/base-files/etc/hotplug.d/net/21_adjust_network
View File

@ -1,7 +0,0 @@
#!/bin/sh
[ -f /lib/adjust_network.sh ] && {
. /lib/adjust_network.sh
adjust_eth_queue
}

19
target/linux/ipq40xx/base-files/etc/init.d/adjust_network
View File

@ -1,19 +0,0 @@
#!/bin/sh /etc/rc.common
# Copyright (C) 2006-2011 OpenWrt.org
START=11
STOP=98
adjust_smp_affinity() {
test -f /lib/adjust_network.sh && {
. /lib/adjust_network.sh
adjust_eth_queue
adjust_edma_smp_affinity
adjust_radio_smp_affinity
}
}
boot() {
adjust_smp_affinity
}

20
target/linux/ipq40xx/base-files/etc/init.d/bootcount Executable file
View File

@ -0,0 +1,20 @@
#!/bin/sh /etc/rc.common
START=99
boot() {
case $(board_name) in
alfa-network,ap120c-ac)
[ -n "$(fw_printenv bootcount changed 2>/dev/null)" ] &&\
echo -e "bootcount\nchanged\n" | /usr/sbin/fw_setenv -s -
;;
linksys,ea6350v3|\
linksys,ea8300|\
linksys,mr8300)
mtd resetbc s_env || true
;;
netgear,wac510)
fw_setenv boot_cnt=0
;;
esac
}

13
target/linux/ipq40xx/base-files/etc/init.d/mt7615_reboot
View File

@ -1,13 +0,0 @@
#!/bin/sh /etc/rc.common
STOP=60
stop() {
. /lib/functions.sh
case $(board_name) in
hiwifi,c526a)
rmmod mt7615e
;;
esac
}

35
target/linux/ipq40xx/base-files/etc/init.d/zlinksys_recovery
View File

@ -1,35 +0,0 @@
#!/bin/sh /etc/rc.common
#
# This script sets auto_recovery to "yes" and resets the boot counter to 0.
# As a golden rule, this should be the latest script to run at boot. For a
# developer snapshot, it is fine to set auto_recovery here. But for a stable
# release, this script must in fact turn off auto_recovery.
#
# Why? Because the custom sysupgrade script for the device will turn on
# auto_recovery to "yes". And it's the job of this script to set the
# boot boot_count to 0 and then disable auto_recovery, as that condition
# means that the stable release went well.
#
# I have to repeat: this script should be changed for stable releases.
START=99
boot() {
. /lib/functions.sh
case $(board_name) in
linksys,ea6350v3)
# make sure auto_recovery in uboot is always on
IS_AUTO_RECOVERY="$(fw_printenv -n auto_recovery)"
if [ "$IS_AUTO_RECOVERY" != "yes" ] ; then
fw_setenv auto_recovery yes
echo "Linksys EA6350v3: fw_setenv: auto_recovery has been set to yes"
fi
# reset the boot counter
fw_setenv boot_count 0
mtd resetbc s_env
echo "Linksys EA6350v3: boot counter has been reset"
echo "Linksys EA6350v3: boot_part=$(fw_printenv -n boot_part)"
;;
esac
}

6
target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration
View File

@ -3,6 +3,9 @@
board=$(board_name)
case "$board" in
asus,map-ac2200)
migrate_leds ':chan=-'
;;
engenius,emr3500)
migrate_leds "emr3500:="
;;
@ -10,6 +13,9 @@ engenius,ens620ext|\
zyxel,nbg6617)
migrate_leds ":wlan2G=:wlan2g" ":wlan5G=:wlan5g"
;;
netgear,wac510)
migrate_leds ":wlan2g=:wlan-0" ":wlan5g=:wlan-1" ":act=:activity"
;;
esac
remove_devicename_leds

10
target/linux/ipq40xx/base-files/etc/uci-defaults/05_fix-compat-version Normal file
View File

@ -0,0 +1,10 @@
. /lib/functions.sh
case "$(board_name)" in
ezviz,cs-w3-wd1200g-eup)
uci set system.@system[0].compat_version="2.0"
uci commit system
;;
esac
exit 0

89
target/linux/ipq40xx/base-files/lib/adjust_network.sh
View File

@ -1,89 +0,0 @@
#!/bin/sh
# this scripts is used for adjust cpu's choice of interrupts.
#
################################################
# Adjust smp_affinity of edma
# Globals:
# None
# Arguments:
# None
# Returns:
# None
# Remark:
# execute only once on start-up.
################################################
adjust_edma_smp_affinity() {
grep -q edma_eth_ /proc/interrupts || return 0
local nr=`cat /proc/cpuinfo | grep processor | wc -l`
local cpu=0
local tx_irq_num
for tx_num in `seq 0 1 15` ; do
cpu=`printf "%x" $((1<<((tx_num/4+0)%nr)))`
tx_irq_num=`grep -m1 edma_eth_tx$tx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
[ -n "$tx_irq_num" ] && echo $cpu > /proc/irq/$tx_irq_num/smp_affinity
done
for rx_num in `seq 0 1 7` ; do
cpu=`printf "%x" $((1<<((rx_num/2)%nr)))`
rx_irq_num=`grep -m1 edma_eth_rx$rx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
[ -n "$rx_irq_num" ] && echo $cpu > /proc/irq/$rx_irq_num/smp_affinity
done
}
################################################
# Adjust smp_affinity of ath10k for 2G and 5G
# Globals:
# None
# Arguments:
# None
# Returns:
# None
# Remark:
# execute only once on start-up.
################################################
adjust_radio_smp_affinity() {
local irqs="`grep -E 'ath10k' /proc/interrupts | cut -d ':' -f 1 | tr -d ' '`"
local nr=`cat /proc/cpuinfo | grep processor | wc -l`
local idx=2
for irq in $irqs; do
cpu=`printf "%x" $((1<<((idx)%nr)))`
echo $cpu > /proc/irq/$irq/smp_affinity
idx=$((idx+1))
done
}
################################################
# Adjust queue of eth
# Globals:
# None
# Arguments:
# None
# Returns:
# None
# Remark:
# Each network reboot needs to be executed.
################################################
adjust_eth_queue() {
local nr=`cat /proc/cpuinfo | grep processor | wc -l`
local idx=0
for epath in /sys/class/net/eth[0-9]*; do
test -e $epath || break
echo $epath | grep -q "\." && continue
eth=`basename $epath`
idx=0
for exps in /sys/class/net/$eth/queues/rx-[0-9]*/rps_cpus; do
test -e $exps || break
cpu=`printf "%x" $((1<<((idx+1)%nr)))`
idx=$((idx+1))
echo $cpu > $exps
echo 256 > `dirname $exps`/rps_flow_cnt
done
which ethtool >/dev/null 2>&1 && ethtool -K $eth gro off
done
echo 1024 > /proc/sys/net/core/rps_sock_flow_entries
}

20
target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
View File

@ -5,22 +5,21 @@ preinit_set_mac_address() {
asus,map-ac2200)
base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
ip link set dev eth0 address $(macaddr_add "$base_mac" 1)
ip link set dev eth1 address $(macaddr_add "$base_mac" 3)
;;
asus,rt-acrh17|\
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
ip link set dev eth0 address $(macaddr_add "$base_mac" 1)
;;
ezviz,cs-w3-wd1200g-eup)
ip link set dev eth0 address $(mtd_get_mac_binary "ART" 0x6)
asus,rt-ac42u)
ip link set dev eth0 address $(mtd_get_mac_binary_ubi Factory 0x1006)
ip link set dev eth1 address $(mtd_get_mac_binary_ubi Factory 0x9006)
;;
engenius,eap2200)
base_mac=$(cat /sys/class/net/eth0/address)
ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
;;
linksys,ea8300)
linksys,ea8300|\
linksys,mr8300)
base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ip link set dev eth0 address "${base_mac}"
ip link set dev eth0 address "$base_mac"
ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
;;
meraki,mr33)
mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
@ -29,6 +28,7 @@ preinit_set_mac_address() {
zyxel,nbg6617)
base_mac=$(cat /sys/class/net/eth0/address)
ip link set dev eth0 address $(macaddr_add "$base_mac" 2)
ip link set dev eth1 address $(macaddr_add "$base_mac" 3)
;;
esac
}

5
target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh
View File

@ -3,15 +3,20 @@ set_preinit_iface() {
case $(board_name) in
aruba,ap-303| \
asus,rt-ac42u| \
asus,rt-ac58u| \
avm,fritzbox-4040| \
ezviz,cs-w3-wd1200g-eup| \
glinet,gl-b1300| \
linksys,ea8300| \
linksys,mr8300| \
meraki,mr33| \
zyxel,nbg6617)
ifname=eth0
;;
devolo,magic-2-wifi-next)
ifname=eth1
;;
esac
}

12
target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh → target/linux/ipq40xx/base-files/lib/upgrade/dualboot_datachk.sh
View File

@ -1,11 +1,11 @@
# The U-Boot loader of the OpenMesh devices requires image sizes and
# checksums to be provided in the U-Boot environment.
# The OpenMesh devices come with 2 main partitions - while one is active
# The U-Boot loader with the datachk patchset for dualbooting requires image
# sizes and checksums to be provided in the U-Boot environment.
# The devices come with 2 main partitions - while one is active
# sysupgrade will flash the other. The boot order is changed to boot the
# newly flashed partition. If the new partition can't be booted due to
# upgrade failures the previously used partition is loaded.
platform_do_upgrade_openmesh() {
platform_do_upgrade_dualboot_datachk() {
local tar_file="$1"
local restore_backup
local primary_kernel_mtd
@ -44,9 +44,11 @@ platform_do_upgrade_openmesh() {
# boot anymore to Linux until it was reflashed with ap51-flash.
local next_boot_part="1"
case "$(board_name)" in
plasmacloud,pa1200|\
openmesh,a42)
primary_kernel_mtd=8
;;
plasmacloud,pa2200|\
openmesh,a62)
primary_kernel_mtd=10
;;
@ -74,7 +76,7 @@ platform_do_upgrade_openmesh() {
#
# take care of restoring a saved config
[ "$SAVE_CONFIG" -eq 1 ] && restore_backup="${MTD_CONFIG_ARGS} -j ${CONF_TAR}"
[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
mtd -q erase inactive
tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME

119
target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh Executable file → Normal file
View File

@ -1,45 +1,76 @@
linksys_get_target_firmware() {
cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
target_firmware=""
if [ "$cur_boot_part" = "1" ]; then
# current primary boot - update alt boot
target_firmware="alt_kernel"
fw_setenv boot_part 2
# In the Linksys EA6350v3, it is enough to set the boot_part as the boot command line is
# bootcmd=if test $boot_part = 1; then run bootpart1; else run bootpart2; fi
# - You probably want to use that if your device's uboot does not eval bootcmd
#fw_setenv bootcmd "run altnandboot"
elif [ "$cur_boot_part" = "2" ]; then
# current alt boot - update primary boot
target_firmware="kernel"
fw_setenv boot_part 1
#fw_setenv bootcmd "run nandboot"
local cur_boot_part mtd_ubi0
cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
if [ -z "${cur_boot_part}" ]; then
mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
kernel|rootfs)
cur_boot_part=1
;;
alt_kernel|alt_rootfs)
cur_boot_part=2
;;
esac
>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
"${cur_boot_part}" "${mtd_ubi0}"
fi
# re-enable recovery so we get back if the new firmware is broken
fw_setenv auto_recovery yes
# see /etc/init.d/zlinksys_recovery
# OEM U-Boot for EA6350v3, EA8300 and MR8300; bootcmd=
# if test $auto_recovery = no;
# then bootipq;
# elif test $boot_part = 1;
# then run bootpart1;
# else run bootpart2;
# fi
echo "$target_firmware"
case "$cur_boot_part" in
1)
fw_setenv -s - <<-EOF
boot_part 2
auto_recovery yes
EOF
printf "alt_kernel"
return
;;
2)
fw_setenv -s - <<-EOF
boot_part 1
auto_recovery yes
EOF
printf "kernel"
return
;;
*)
return
;;
esac
}
linksys_get_root_magic() {
(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
linksys_is_factory_image() {
local board=$(board_name)
board=${board##*,}
# check matching footer signature
tail -c 256 $1 | grep -q -i "\.LINKSYS\.........${board}"
}
platform_do_upgrade_linksys() {
local magic_long="$(get_magic_long "$1")"
local rm_oem_fw_vols="squashfs ubifs" # from OEM [alt_]rootfs UBI
local vol
mkdir -p /var/lock
local part_label="$(linksys_get_target_firmware)"
touch /var/lock/fw_printenv.lock
if [ ! -n "$part_label" ]; then
if [ -z "$part_label" ]; then
echo "cannot find target partition"
exit 1
fi
local target_mtd=$(find_mtd_part $part_label)
local target_mtd=$(find_mtd_part "$part_label")
[ "$magic_long" = "73797375" ] && {
CI_KERNPART="$part_label"
@ -49,47 +80,41 @@ platform_do_upgrade_linksys() {
CI_UBIPART="alt_rootfs"
fi
# remove "squashfs" vol (in case we are flashing over a stock image, which is also UBI)
local mtdnum="$( find_mtd_index "$CI_UBIPART" )"
local mtdnum="$(find_mtd_index "$CI_UBIPART")"
if [ ! "$mtdnum" ]; then
echo "cannot find ubi mtd partition $CI_UBIPART"
return 1
fi
local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
local ubidev="$(nand_find_ubi "$CI_UBIPART")"
if [ ! "$ubidev" ]; then
ubiattach -m "$mtdnum"
sync
ubidev="$( nand_find_ubi "$CI_UBIPART" )"
ubidev="$(nand_find_ubi "$CI_UBIPART")"
fi
if [ "$ubidev" ]; then
local squash_ubivol="$( nand_find_volume $ubidev squashfs )"
# kill volume
[ "$squash_ubivol" ] && ubirmvol /dev/$ubidev -N squashfs || true
for vol in $rm_oem_fw_vols; do
ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
done
fi
# complete std upgrade
nand_upgrade_tar "$1"
}
[ "$magic_long" = "27051956" ] && {
# This magic is for a uImage (which is a sysupgrade image)
# check firmwares' rootfs types
local oldroot="$(linksys_get_root_magic $target_mtd)"
local newroot="$(linksys_get_root_magic "$1")"
if [ "$newroot" = "55424923" -a "$oldroot" = "55424923" ]; then
# we're upgrading from a firmware with UBI to one with UBI
# erase everything to be safe
# - Is that really needed? Won't remove (or comment) the if, because it may be needed in a future device.
#mtd erase $part_label
#get_image "$1" | mtd -n write - $part_label
echo "writing \"$1\" UBI image to \"$part_label\" (UBI)..."
get_image "$1" | mtd write - $part_label
else
echo "writing \"$1\" image to \"$part_label\""
get_image "$1" | mtd write - $part_label
[ "$magic_long" = "27051956" ] && {
echo "writing \"$1\" image to \"$part_label\""
get_image "$1" | mtd write - "$part_label"
}
[ "$magic_long" = "d00dfeed" ] && {
if ! linksys_is_factory_image "$1"; then
echo "factory image doesn't match device"
return 1
fi
echo "writing \"$1\" factory image to \"$part_label\""
get_image "$1" | mtd -e "$part_label" write - "$part_label"
}
}

76
target/linux/ipq40xx/base-files/lib/upgrade/netgear.sh Normal file
View File

@ -0,0 +1,76 @@
# SPDX-License-Identifier: GPL-2.0-only
. /lib/functions.sh
platform_do_upgrade_netgear_orbi_upgrade() {
command -v losetup >/dev/null || {
logger -s "Upgrade failed: 'losetup' not installed."
return 1
}
local tar_file=$1
local kernel=$2
local rootfs=$3
[ -z "$kernel" ] && kernel=$(find_mmc_part "kernel")
[ -z "$rootfs" ] && rootfs=$(find_mmc_part "rootfs")
[ -z "$kernel" ] && echo "Upgrade failed: kernel partition not found! Rebooting..." && reboot -f
[ -z "$rootfs" ] && echo "Upgrade failed: rootfs partition not found! Rebooting..." && reboot -f
netgear_orbi_do_flash $tar_file $kernel $rootfs
echo "sysupgrade successful"
umount -a
reboot -f
}
netgear_orbi_do_flash() {
local tar_file=$1
local kernel=$2
local rootfs=$3
# keep sure its unbound
losetup --detach-all || {
echo "Failed to detach all loop devices. Skip this try."
reboot -f
}
# use the first found directory in the tar archive
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
echo "flashing kernel to $kernel"
tar xf $tar_file ${board_dir}/kernel -O >$kernel
echo "flashing rootfs to ${rootfs}"
tar xf $tar_file ${board_dir}/root -O >"${rootfs}"
# a padded rootfs is needed for overlay fs creation
local offset=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
[ $offset -lt 65536 ] && {
echo "Wrong size for rootfs: $offset"
sleep 10
reboot -f
}
# Mount loop for rootfs_data
local loopdev="$(losetup -f)"
losetup -o $offset $loopdev $rootfs || {
echo "Failed to mount looped rootfs_data."
sleep 10
reboot -f
}
echo "Format new rootfs_data at position ${offset}."
mkfs.ext4 -F -L rootfs_data $loopdev
mkdir /tmp/new_root
mount -t ext4 $loopdev /tmp/new_root && {
echo "Saving config to rootfs_data at position ${offset}."
cp -v "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
umount /tmp/new_root
}
# Cleanup
losetup -d $loopdev >/dev/null 2>&1
sync
}

274
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
View File

@ -4,141 +4,52 @@ REQUIRE_IMAGE_METADATA=1
RAMFS_COPY_BIN='fw_printenv fw_setenv'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
ubi_kill_if_exist() {
local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
local c_ubivol="$( nand_find_volume $ubidev $1 )"
umount -f /dev/$c_ubivol 2>/dev/null
[ "$c_ubivol" ] && ubirmvol /dev/$ubidev -N $1 || true
echo "Partition $1 removed."
}
# idea from @981213
# Tar sysupgrade for ASUS RT-AC82U/RT-AC58U
# An ubi repartition is required due to the strange partition table created by Asus.
# We create all the factory partitions to make sure that the U-boot tftp recovery still works.
# The reserved kernel partition size should be enough to put the factory image in.
asus_nand_upgrade_tar() {
local kpart_size="$1"
local tar_file="$2"
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
local kernel_length=`(tar xf $tar_file ${board_dir}/kernel -O | wc -c) 2> /dev/null`
local rootfs_length=`(tar xf $tar_file ${board_dir}/root -O | wc -c) 2> /dev/null`
local mtdnum="$( find_mtd_index "$CI_UBIPART" )"
if [ ! "$mtdnum" ]; then
echo "cannot find ubi mtd partition $CI_UBIPART"
return 1
fi
local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
if [ ! "$ubidev" ]; then
ubiattach -m "$mtdnum"
sync
ubidev="$( nand_find_ubi "$CI_UBIPART" )"
fi
if [ ! "$ubidev" ]; then
echo "cannot find ubi device $CI_UBIPART"
return 1
fi
local root_ubivol="$( nand_find_volume $ubidev rootfs )"
# remove ubiblock device of rootfs
local root_ubiblk="ubiblock${root_ubivol:3}"
if [ "$root_ubivol" -a -e "/dev/$root_ubiblk" ]; then
echo "removing $root_ubiblk"
if ! ubiblock -r /dev/$root_ubivol; then
echo "cannot remove $root_ubiblk"
return 1;
fi
fi
ubi_kill_if_exist rootfs_data
ubi_kill_if_exist rootfs
ubi_kill_if_exist jffs2
ubi_kill_if_exist linux2
ubi_kill_if_exist linux
ubimkvol /dev/$ubidev -N linux -s $kpart_size
ubimkvol /dev/$ubidev -N linux2 -s $kpart_size
ubimkvol /dev/$ubidev -N jffs2 -s 2539520
ubimkvol /dev/$ubidev -N rootfs -s $rootfs_length
ubimkvol /dev/$ubidev -N rootfs_data -m
local kern_ubivol="$(nand_find_volume $ubidev $CI_KERNPART)"
echo "Kernel at $kern_ubivol.Writing..."
tar xf $tar_file ${board_dir}/kernel -O | \
ubiupdatevol /dev/$kern_ubivol -s $kernel_length -
echo "Done."
local root_ubivol="$(nand_find_volume $ubidev rootfs)"
echo "Rootfs at $root_ubivol.Writing..."
tar xf $tar_file ${board_dir}/root -O | \
ubiupdatevol /dev/$root_ubivol -s $rootfs_length -
echo "Done."
nand_do_upgrade_success
}
# idea from @981213
# Factory image sysupgrade for ASUS RT-AC82U/RT-AC58U
# Delete all the partitions we created before, create "linux" partition and write factory image in.
# Skip the first 64bytes which is an uImage header to verify the firmware.
# The kernel partition size should be the original one.
asus_nand_upgrade_factory() {
local kpart_size="$1"
local fw_file="$2"
local mtdnum="$( find_mtd_index "$CI_UBIPART" )"
if [ ! "$mtdnum" ]; then
echo "cannot find ubi mtd partition $CI_UBIPART"
return 1
fi
local ubidev="$( nand_find_ubi "$CI_UBIPART" )"
if [ ! "$ubidev" ]; then
ubiattach -m "$mtdnum"
sync
ubidev="$( nand_find_ubi "$CI_UBIPART" )"
fi
if [ ! "$ubidev" ]; then
echo "cannot find ubi device $CI_UBIPART"
return 1
fi
local root_ubivol="$( nand_find_volume $ubidev rootfs )"
# remove ubiblock device of rootfs
local root_ubiblk="ubiblock${root_ubivol:3}"
if [ "$root_ubivol" -a -e "/dev/$root_ubiblk" ]; then
echo "removing $root_ubiblk"
if ! ubiblock -r /dev/$root_ubivol; then
echo "cannot remove $root_ubiblk"
return 1;
fi
fi
ubi_kill_if_exist rootfs_data
ubi_kill_if_exist rootfs
ubi_kill_if_exist jffs2
ubi_kill_if_exist linux2
ubi_kill_if_exist linux
ubimkvol /dev/$ubidev -N linux -s $kpart_size
local kern_ubivol="$(nand_find_volume $ubidev $CI_KERNPART)"
echo "Asus linux at $kern_ubivol.Writing..."
ubiupdatevol /dev/$kern_ubivol --skip=64 $fw_file
echo "Done."
umount -a
reboot -f
}
platform_check_image() {
case "$(board_name)" in
asus,rt-ac42u |\
asus,rt-ac58u)
local ubidev=$(nand_find_ubi $CI_UBIPART)
local asus_root=$(nand_find_volume $ubidev jffs2)
[ -n "$asus_root" ] || return 0
cat << EOF
jffs2 partition is still present.
There's probably no space left
to install the filesystem.
You need to delete the jffs2 partition first:
# ubirmvol /dev/ubi0 --name=jffs2
Once this is done. Retry.
EOF
return 1
;;
zte,mf286d |\
zte,mf289f)
CI_UBIPART="rootfs"
local mtdnum="$( find_mtd_index $CI_UBIPART )"
[ ! "$mtdnum" ] && return 1
ubiattach -m "$mtdnum" || true
local ubidev="$( nand_find_ubi $CI_UBIPART )"
local ubi_rootfs=$(nand_find_volume $ubidev ubi_rootfs)
local ubi_rootfs_data=$(nand_find_volume $ubidev ubi_rootfs_data)
[ -n "$ubi_rootfs" ] || [ -n "$ubi_rootfs_data" ] || return 0
cat << EOF
ubi_rootfs partition is still present.
You need to delete the stock partition first:
# ubirmvol /dev/ubi0 -N ubi_rootfs
Please also delete ubi_rootfs_data, if exist:
# ubirmvol /dev/ubi0 -N ubi_rootfs_data
Once this is done. Retry.
EOF
return 1
;;
esac
return 0;
}
@ -161,13 +72,31 @@ zyxel_do_upgrade() {
tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
if [ "$SAVE_CONFIG" -eq 1 ]; then
tar Oxf $tar_file ${board_dir}/root | mtd -j "$CONF_TAR" write - rootfs
if [ -n "$UPGRADE_BACKUP" ]; then
tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
else
tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
fi
}
platform_do_upgrade_mikrotik_nand() {
local fw_mtd=$(find_mtd_part kernel)
fw_mtd="${fw_mtd/block/}"
[ -n "$fw_mtd" ] || return
local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
[ -n "$board_dir" ] || return
local kernel_len=$(tar xf "$1" ${board_dir}/kernel -O | wc -c)
[ -n "$kernel_len" ] || return
tar xf "$1" ${board_dir}/kernel -O | ubiformat "$fw_mtd" -y -S $kernel_len -f -
CI_KERNPART="none"
nand_do_upgrade "$1"
}
platform_do_upgrade() {
case "$(board_name)" in
8dev,jalapeno |\
@ -178,15 +107,25 @@ platform_do_upgrade() {
avm,fritzrepeater-1200 |\
avm,fritzrepeater-3000 |\
buffalo,wtr-m2133hp |\
century,wr142ac-nand |\
cilab,meshpoint-one |\
glinet,gl-a1300 |\
hiwifi,c526a |\
edgecore,ecw5211 |\
edgecore,oap100 |\
engenius,eap2200 |\
glinet,gl-ap1300 |\
luma,wrtq-329acn |\
mobipromo,cm520-79f |\
qxwlan,e2600ac-c2 |\
zte,mf263)
netgear,wac510 |\
p2w,r619ac-64m |\
p2w,r619ac-128m |\
qxwlan,e2600ac-c2)
nand_do_upgrade "$1"
;;
glinet,gl-b2200)
CI_KERNPART="0:HLOS"
CI_ROOTPART="rootfs"
CI_DATAPART="rootfs_data"
emmc_do_upgrade "$1"
;;
alfa-network,ap120c-ac)
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
if [ "$part" = "rootfs1" ]; then
@ -202,39 +141,55 @@ platform_do_upgrade() {
CI_KERNPART="linux"
nand_do_upgrade "$1"
;;
asus,rt-acrh17|\
asus,rt-ac42u |\
asus,rt-ac58u)
local magic=$(get_magic_long "$1")
CI_UBIPART="UBI_DEV"
CI_KERNPART="linux"
if [ "$magic" == "27051956" ]; then
echo "Got Asus factory image."
asus_nand_upgrade_factory 50409472 "$1"
else
asus_nand_upgrade_tar 20951040 "$1"
fi
nand_do_upgrade "$1"
;;
cellc,rtl30vw)
CI_UBIPART="ubifs"
askey_do_upgrade "$1"
;;
compex,wpj419|\
p2w,r619ac|\
p2w,r619ac-128m)
compex,wpj419)
nand_do_upgrade "$1"
;;
linksys,ea6350v3 |\
linksys,ea8300)
linksys,ea8300 |\
linksys,mr8300)
platform_do_upgrade_linksys "$1"
;;
meraki,mr33)
CI_KERNPART="part.safe"
nand_do_upgrade "$1"
;;
mikrotik,cap-ac|\
mikrotik,hap-ac2|\
mikrotik,lhgg-60ad|\
mikrotik,sxtsq-5-ac)
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
default_do_upgrade "$1"
;;
mikrotik,hap-ac3)
platform_do_upgrade_mikrotik_nand "$1"
;;
netgear,rbr50 |\
netgear,rbs50 |\
netgear,srr60 |\
netgear,srs60)
platform_do_upgrade_netgear_orbi_upgrade "$1"
;;
openmesh,a42 |\
openmesh,a62)
openmesh,a62 |\
plasmacloud,pa1200 |\
plasmacloud,pa2200)
PART_NAME="inactive"
platform_do_upgrade_openmesh "$1"
platform_do_upgrade_dualboot_datachk "$1"
;;
teltonika,rutx10 |\
zte,mf286d |\
zte,mf289f)
CI_UBIPART="rootfs"
nand_do_upgrade "$1"
;;
zyxel,nbg6617)
zyxel_do_upgrade "$1"
@ -245,10 +200,11 @@ platform_do_upgrade() {
esac
}
platform_nand_pre_upgrade() {
platform_copy_config() {
case "$(board_name)" in
meraki,mr33)
CI_KERNPART="part.safe"
glinet,gl-b2200)
emmc_copy_config
;;
esac
return 0;
}

98
target/linux/ipq40xx/config-5.4 → target/linux/ipq40xx/config-5.10
View File

@ -3,7 +3,6 @@ CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APQ_MMCC_8084 is not set
CONFIG_AR40XX_PHY=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_IPQ40XX=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
@ -19,6 +18,8 @@ CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_QCOM=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
@ -27,7 +28,6 @@ CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
CONFIG_ARM_CPUIDLE=y
CONFIG_ARM_CPU_SUSPEND=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_ARM_CRYPTO=y
CONFIG_ARM_GIC=y
@ -37,6 +37,8 @@ CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set
# CONFIG_ARM_QCOM_SPM_CPUIDLE is not set
# CONFIG_ARM_SMMU is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
@ -45,6 +47,7 @@ CONFIG_AT803X_PHY=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BCH=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_BLK_CMDLINE_PARSER=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BOUNCE=y
@ -52,7 +55,7 @@ CONFIG_BOUNCE=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_QCOM=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE_OVERRIDE=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_COMPAT_32BIT_TIME=y
@ -67,15 +70,14 @@ CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_HAS_ASID=y
@ -94,14 +96,11 @@ CONFIG_CPU_V7=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_AES_ARM=y
CONFIG_CRYPTO_AES_ARM_BS=y
CONFIG_CRYPTO_BLAKE2S=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DEV_QCE=y
@ -115,23 +114,19 @@ CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA256_ARM=y
CONFIG_CRYPTO_SIMD=y
@ -143,6 +138,7 @@ CONFIG_DEBUG_MISC=y
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_OPS=y
CONFIG_DMA_REMAP=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
@ -163,6 +159,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
@ -180,11 +177,12 @@ CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_HARDIRQS_SW_RESEND=y
@ -193,7 +191,7 @@ CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_SMP=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HIGHPTE=y
CONFIG_HWSPINLOCK=y
CONFIG_HWSPINLOCK_QCOM=y
CONFIG_HW_RANDOM=y
@ -203,6 +201,7 @@ CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# CONFIG_I2C_QCOM_CCI is not set
CONFIG_I2C_QUP=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IOMMU_DEBUGFS is not set
@ -210,13 +209,16 @@ CONFIG_INITRAMFS_SOURCE=""
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_IO_URING=y
# CONFIG_IPQ_APSS_PLL is not set
CONFIG_IPQ_GCC_4019=y
# CONFIG_IPQ_GCC_6018 is not set
# CONFIG_IPQ_GCC_806X is not set
# CONFIG_IPQ_GCC_8074 is not set
# CONFIG_IPQ_LCC_806X is not set
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
# CONFIG_KPSS_XCC is not set
@ -224,6 +226,8 @@ CONFIG_IRQ_WORK=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_TLC591XX=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
@ -232,11 +236,13 @@ CONFIG_LZO_DECOMPRESS=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_IPQ4019=y
# CONFIG_MDM_GCC_9615 is not set
# CONFIG_MDM_LCC_9615 is not set
CONFIG_MEMFD_CREATE=y
# CONFIG_MFD_HI6421_SPMI is not set
# CONFIG_MFD_QCOM_RPM is not set
# CONFIG_MFD_SPMI_PMIC is not set
CONFIG_MFD_SYSCON=y
@ -244,6 +250,7 @@ CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_MSM=y
@ -252,17 +259,21 @@ CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MSM_GCC_8660 is not set
# CONFIG_MSM_GCC_8916 is not set
# CONFIG_MSM_GCC_8939 is not set
# CONFIG_MSM_GCC_8960 is not set
# CONFIG_MSM_GCC_8974 is not set
# CONFIG_MSM_GCC_8994 is not set
# CONFIG_MSM_GCC_8996 is not set
# CONFIG_MSM_GCC_8998 is not set
# CONFIG_MSM_GPUCC_8998 is not set
# CONFIG_MSM_LCC_8960 is not set
# CONFIG_MSM_MMCC_8960 is not set
# CONFIG_MSM_MMCC_8974 is not set
# CONFIG_MSM_MMCC_8996 is not set
# CONFIG_MSM_MMCC_8998 is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND_CORE=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_QCOM=y
@ -287,6 +298,7 @@ CONFIG_NO_HZ_COMMON=y
CONFIG_NO_HZ_IDLE=y
CONFIG_NR_CPUS=4
CONFIG_NVMEM=y
# CONFIG_NVMEM_SPMI_SDAM is not set
CONFIG_NVMEM_SYSFS=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
@ -320,21 +332,27 @@ CONFIG_PHYLIB=y
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
CONFIG_PHY_QCOM_IPQ4019_USB=y
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
# CONFIG_PHY_QCOM_UFS is not set
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
# CONFIG_PHY_QCOM_USB_SS is not set
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_APQ8064 is not set
# CONFIG_PINCTRL_APQ8084 is not set
CONFIG_PINCTRL_IPQ4019=y
# CONFIG_PINCTRL_IPQ6018 is not set
# CONFIG_PINCTRL_IPQ8064 is not set
# CONFIG_PINCTRL_IPQ8074 is not set
# CONFIG_PINCTRL_MDM9615 is not set
CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_MSM8226 is not set
# CONFIG_PINCTRL_MSM8660 is not set
# CONFIG_PINCTRL_MSM8916 is not set
# CONFIG_PINCTRL_MSM8960 is not set
# CONFIG_PINCTRL_MSM8976 is not set
# CONFIG_PINCTRL_MSM8994 is not set
# CONFIG_PINCTRL_MSM8996 is not set
# CONFIG_PINCTRL_MSM8998 is not set
@ -345,42 +363,32 @@ CONFIG_PINCTRL_MSM=y
# CONFIG_PINCTRL_SDM660 is not set
# CONFIG_PINCTRL_SDM845 is not set
# CONFIG_PINCTRL_SM8150 is not set
# CONFIG_PINCTRL_SM8250 is not set
CONFIG_PM_OPP=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_RESET_GPIO_RESTART=y
CONFIG_POWER_SUPPLY=y
CONFIG_PPS=y
CONFIG_PRINTK_TIME=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_842_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
CONFIG_PSTORE_DEFLATE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=y
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PTP_1588_CLOCK=y
CONFIG_QCA807X_PHY=y
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_BAM_DMA=y
# CONFIG_QCOM_COMMAND_DB is not set
# CONFIG_QCOM_CPR is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_HFPLL is not set
# CONFIG_QCOM_IOMMU is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_OCMEM is not set
# CONFIG_QCOM_PDC is not set
CONFIG_QCOM_PM=y
CONFIG_QCOM_QFPROM=y
# CONFIG_QCOM_RMTFS_MEM is not set
# CONFIG_QCOM_RPMH is not set
CONFIG_QCOM_SCM=y
CONFIG_QCOM_SCM_32=y
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
CONFIG_QCOM_SMEM=y
# CONFIG_QCOM_SMSM is not set
@ -389,23 +397,18 @@ CONFIG_QCOM_TCSR=y
# CONFIG_QCOM_TSENS is not set
CONFIG_QCOM_WDT=y
# CONFIG_QCS_GCC_404 is not set
# CONFIG_QCS_Q6SSTOP_404 is not set
# CONFIG_QCS_TURING_404 is not set
# CONFIG_QRTR is not set
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REFCOUNT_FULL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_QCOM_LABIBB is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_VQMMC_IPQ4019=y
CONFIG_RESET_CONTROLLER=y
@ -417,6 +420,12 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
# CONFIG_SC_DISPCC_7180 is not set
# CONFIG_SC_GCC_7180 is not set
# CONFIG_SC_GPUCC_7180 is not set
# CONFIG_SC_LPASS_CORECC_7180 is not set
# CONFIG_SC_MSS_7180 is not set
# CONFIG_SC_VIDEOCC_7180 is not set
# CONFIG_SDM_CAMCC_845 is not set
# CONFIG_SDM_DISPCC_845 is not set
# CONFIG_SDM_GCC_660 is not set
@ -432,6 +441,11 @@ CONFIG_SGL_ALLOC=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
# CONFIG_SM_GCC_8150 is not set
# CONFIG_SM_GCC_8250 is not set
# CONFIG_SM_GPUCC_8150 is not set
# CONFIG_SM_GPUCC_8250 is not set
# CONFIG_SM_VIDEOCC_8150 is not set
# CONFIG_SM_VIDEOCC_8250 is not set
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
@ -440,6 +454,7 @@ CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_QUP=y
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_SRCU=y
@ -460,7 +475,6 @@ CONFIG_TIMER_PROBE=y
CONFIG_TREE_RCU=y
CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
# CONFIG_UCLAMP_TASK is not set
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNWINDER_ARM=y

84
target/linux/ipq40xx/files/drivers/net/phy/ar40xx.c → target/linux/ipq40xx/files-5.10/drivers/net/mdio/ar40xx.c
View File

@ -13,6 +13,7 @@
* OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/bitfield.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/bitops.h>
@ -82,8 +83,6 @@ static const struct ar40xx_mib_desc ar40xx_mibs[] = {
MIB_DESC(1, AR40XX_STATS_TXLATECOL, "TxLateCol"),
};
static const int ar40xx_mibs_rx_tx[] = { 15, 31 };
static u32
ar40xx_read(struct ar40xx_priv *priv, int reg)
{
@ -432,36 +431,6 @@ ar40xx_mib_fetch_port_stat(struct ar40xx_priv *priv, int port, bool flush)
}
}
/* similar to ar40xx_mib_fetch_port_stat, but only fetch RXGOODBYTE and TXBYTE */
static void
ar40xx_mib_fetch_port_stat_rx_tx(struct ar40xx_priv *priv, int port)
{
unsigned int base;
u64 *mib_stats;
int j;
u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
WARN_ON(port >= priv->dev.ports);
lockdep_assert_held(&priv->mib_lock);
base = AR40XX_REG_PORT_STATS_START +
AR40XX_REG_PORT_STATS_LEN * port;
mib_stats = &priv->mib_stats[port * num_mibs];
for (j = 0; j < ARRAY_SIZE(ar40xx_mibs_rx_tx); j++) {
const int i = ar40xx_mibs_rx_tx[j];
const struct ar40xx_mib_desc *mib;
u64 t;
mib = &ar40xx_mibs[i];
t = ar40xx_read(priv, base + mib->offset);
t |= ar40xx_read(priv, base + mib->offset + 4) << 32;
mib_stats[i] += t;
}
}
static int
ar40xx_mib_capture(struct ar40xx_priv *priv)
{
@ -803,36 +772,6 @@ ar40xx_sw_get_port_link(struct switch_dev *dev, int port,
return 0;
}
static int
ar40xx_sw_get_port_stats(struct switch_dev *dev, int port,
struct switch_port_stats *stats)
{
struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
u64 *mib_stats;
int ret = 0;
static int last_port = AR40XX_NUM_PORTS - 1;
mutex_lock(&priv->mib_lock);
/* Avoid unnecessary capture */
if (last_port >= port) {
ret = ar40xx_mib_capture(priv);
if (ret)
goto unlock;
}
last_port = port;
ar40xx_mib_fetch_port_stat_rx_tx(priv, port);
mib_stats = &priv->mib_stats[port * num_mibs];
stats->rx_bytes = mib_stats[ar40xx_mibs_rx_tx[0]];
stats->tx_bytes = mib_stats[ar40xx_mibs_rx_tx[1]];
unlock:
mutex_unlock(&priv->mib_lock);
return ret;
}
static const struct switch_attr ar40xx_sw_attr_globals[] = {
{
.type = SWITCH_TYPE_INT,
@ -997,6 +936,7 @@ ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv)
*/
mdelay(2);
}
mdelay(50);
/*check malibu psgmii calibration done end..*/
@ -1015,6 +955,7 @@ ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv)
/* Polling interval to check PSGMII PLL in ESS is ready */
mdelay(2);
}
mdelay(50);
/* check dakota psgmii calibration done end..*/
@ -1022,6 +963,7 @@ ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv)
mdiobus_write(bus, 5, 0x1a, 0x3230);
/* release phy psgmii RX 20bit */
mdiobus_write(bus, 5, 0x0, 0x005f);
mdelay(200);
}
static void
@ -1260,8 +1202,7 @@ ar40xx_init_port(struct ar40xx_priv *priv, int port)
{
u32 t;
ar40xx_rmw(priv, AR40XX_REG_PORT_STATUS(port),
AR40XX_PORT_AUTO_LINK_EN, 0);
ar40xx_write(priv, AR40XX_REG_PORT_STATUS(port), 0);
ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0);
@ -1398,13 +1339,13 @@ ar40xx_sw_mac_polling_task(struct ar40xx_priv *priv)
for (i = 1; i < AR40XX_NUM_PORTS; ++i) {
port_phy_status[i] =
mdiobus_read(bus, i-1, AR40XX_PHY_SPEC_STATUS);
speed = link = duplex = port_phy_status[i];
speed &= AR40XX_PHY_SPEC_STATUS_SPEED;
speed >>= 14;
link &= AR40XX_PHY_SPEC_STATUS_LINK;
link >>= 10;
duplex &= AR40XX_PHY_SPEC_STATUS_DUPLEX;
duplex >>= 13;
speed = FIELD_GET(AR40XX_PHY_SPEC_STATUS_SPEED,
port_phy_status[i]);
link = FIELD_GET(AR40XX_PHY_SPEC_STATUS_LINK,
port_phy_status[i]);
duplex = FIELD_GET(AR40XX_PHY_SPEC_STATUS_DUPLEX,
port_phy_status[i]);
if (link != priv->ar40xx_port_old_link[i]) {
++link_cnt[i];
@ -1786,7 +1727,6 @@ static const struct switch_dev_ops ar40xx_sw_ops = {
.apply_config = ar40xx_sw_hw_apply,
.reset_switch = ar40xx_sw_reset_switch,
.get_port_link = ar40xx_sw_get_port_link,
.get_port_stats = ar40xx_sw_get_port_stats,
};
/* Platform driver probe function */

5
target/linux/ipq40xx/files/drivers/net/phy/ar40xx.h → target/linux/ipq40xx/files-5.10/drivers/net/mdio/ar40xx.h
View File

@ -151,6 +151,9 @@ struct ar40xx_mib_desc {
#define AR40XX_MIB_FUNC_NO_OP 0x0
#define AR40XX_MIB_FUNC_FLUSH 0x1
#define AR40XX_ESS_SERVICE_TAG 0x48
#define AR40XX_ESS_SERVICE_TAG_STAG BIT(17)
#define AR40XX_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
#define AR40XX_PORT_SPEED BITS(0, 2)
#define AR40XX_PORT_STATUS_SPEED_S 0
@ -179,6 +182,8 @@ struct ar40xx_mib_desc {
#define AR40XX_PORT_VLAN0_DEF_CVID_S 16
#define AR40XX_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8)
#define AR40XX_PORT_VLAN1_CORE_PORT BIT(9)
#define AR40XX_PORT_VLAN1_PORT_TLS_MODE BIT(7)
#define AR40XX_PORT_VLAN1_PORT_VLAN_PROP BIT(6)
#define AR40XX_PORT_VLAN1_OUT_MODE BITS(12, 2)
#define AR40XX_PORT_VLAN1_OUT_MODE_S 12

17
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts
View File

@ -134,7 +134,6 @@
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
@ -175,6 +174,22 @@
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <2 0x20>;
};
&gmac1 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&usb2_hs_phy {
status = "okay";
};

31
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
View File

@ -211,6 +211,17 @@
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@180000 {
@ -266,6 +277,22 @@
#gpio-cells = <2>;
};
&gmac0 {
qcom,forced_duplex = <1>;
qcom,forced_speed = <1000>;
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
vlan_tag = <1 0x10>;
};
&gmac1 {
qcom,forced_duplex = <1>;
qcom,forced_speed = <1000>;
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
vlan_tag = <2 0x20>;
};
&tlmm {
i2c0_pins: i2c0_pinmux {
mux_i2c {
@ -326,9 +353,13 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
};

249
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts Normal file
View File

@ -0,0 +1,249 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "MikroTik cAP ac";
compatible = "mikrotik,cap-ac";
memory {
device_type = "memory";
reg = <0x80000000 0x08000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
led-boot = &led_user;
led-failsafe = &led_user;
led-running = &led_user;
led-upgrade = &led_user;
};
soc {
rng@22000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
qcom,poll_required = <0>;
qcom,num_gmac = <1>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
mode {
label = "mode";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LIGHTS_TOGGLE>;
};
};
leds {
compatible = "gpio-leds";
power {
label = "blue:power";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
led_user: user {
label = "green:user";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
wlan2g {
label = "green:wlan2g";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan5g {
label = "green:wlan5g";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
eth1 {
label = "green:eth1";
gpios = <&ethphy4 1 GPIO_ACTIVE_HIGH>;
};
eth2 {
label = "green:eth2";
gpios = <&ethphy3 1 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Qualcomm";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
label = "RouterBoot";
reg = <0x80000 0x80000>;
hard_config {
read-only;
};
dtb_config {
read-only;
};
soft_config {
};
};
partition@100000 {
compatible = "mikrotik,minor";
label = "firmware";
reg = <0x100000 0xf00000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&mdio {
status = "okay";
};
&gmac0 {
vlan_tag = <0 0x3f>;
};
&ethphy3 {
gpio-controller;
#gpio-cells = <2>;
};
&ethphy4 {
gpio-controller;
#gpio-cells = <2>;
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-cAP-ac";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-cAP-ac";
};

35
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts
View File

@ -134,7 +134,6 @@
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
@ -211,6 +210,26 @@
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
reg = <0x6 0x6>;
};
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition9@580000 {
@ -235,9 +254,23 @@
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
};
&gmac0 {
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_art_6>;
};
&gmac1 {
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_art_0>;
};

14
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts
View File

@ -109,79 +109,66 @@
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
};
partition@180000 {
compatible = "wrg";
label = "firmware";
reg = <0x180000 0xdc0000>;
};
partition@fb0000 {
label = "rgbd";
reg = <0xfb0000 0x10000>;
read-only;
};
partition@fc0000 {
label = "bdcfg";
reg = <0xfc0000 0x10000>;
read-only;
};
partition@fd0000 {
label = "langpack";
reg = <0xfd0000 0x20000>;
read-only;
};
partition@ff0000 {
label = "certificate";
reg = <0xff0000 0x10000>;
read-only;
};
partition@f40000 {
label = "captival";
reg = <0xf40000 0x70000>;
@ -233,7 +220,6 @@
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54";

30
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
View File

@ -116,15 +116,18 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "linksys-ea6350v3";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "linksys-ea6350v3";
};
&blsp_dma {
status = "okay";
};
@ -178,53 +181,55 @@
reg = <0x00000000 0x00040000>;
read-only;
};
MBIB@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
QSEE@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
CDT@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
APPSBLENV@d0000 {
label = "APPSBLENV";
reg = <0x000d0000 0x00010000>;
read-only;
};
APPSBL@e0000 {
label = "APPSBL"; /* uboot */
reg = <0x000e0000 0x00080000>;
read-only;
};
ART@160000 {
label = "ART";
reg = <0x00160000 0x00010000>;
read-only;
};
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
u_env@170000 {
label = "u_env";
reg = <0x00170000 0x00020000>;
};
s_env@190000 {
label = "s_env";
reg = <0x00190000 0x00020000>;
};
devinfo@1b0000 {
label = "devinfo";
reg = <0x001b0000 0x00010000>;
@ -248,27 +253,22 @@
label = "kernel";
reg = <0x00000000 0x02800000>;
};
rootfs@300000 {
label = "rootfs";
reg = <0x00300000 0x02500000>;
};
alt_kernel@2800000 {
label = "alt_kernel";
reg = <0x02800000 0x02800000>;
};
alt_rootfs@2b00000 {
label = "alt_rootfs";
reg = <0x02b00000 0x02500000>;
};
sysdiag@5000000 {
label = "sysdiag";
reg = <0x05000000 0x00100000>;
};
syscfg@5100000 {
label = "syscfg";
reg = <0x05100000 0x02F00000>;

34
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts
View File

@ -120,7 +120,6 @@
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
@ -155,60 +154,61 @@
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "0:APPSBL";
reg = <0x000f0000 0x00090000>;
read-only;
};
partition7@180000 {
label = "0:ART";
reg = <0x00180000 0x00010000>;
read-only;
};
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition8@190000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x190000 0x1dc0000>;
};
partition9@1f50000 {
label = "u-boot-env";
reg = <0x01f50000 0x00010000>;
};
partition10@1f60000 {
label = "userconfig";
reg = <0x01f60000 0x000a0000>;
@ -227,12 +227,24 @@
status = "okay";
};
&gmac0 {
vlan_tag = <2 0x20>;
};
&gmac1 {
vlan_tag = <1 0x10>;
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
};

337
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts Normal file
View File

@ -0,0 +1,337 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Edgecore ECW5211";
compatible = "edgecore,ecw5211";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &gmac0;
};
chosen {
bootargs-append = " root=/dev/ubiblock0_1";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "yellow:power";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "green:wlan2g";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "green:wlan5g";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
};
soc {
rng@22000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
phys = <&usb3_hs_phy>;
phy-names = "usb2-phy";
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
};
edma@c080000 {
status = "okay";
};
};
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_mdio {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
mux_mdc {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi0_pins: spi0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54", "gpio4";
drive-strength = <2>;
bias-disable;
output-high;
};
};
i2c0_pins: i2c0_pinmux {
mux_i2c {
function = "blsp_i2c0";
pins = "gpio58", "gpio59";
drive-strength = <16>;
bias-disable;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV"; /* uboot env */
reg = <0x000e0000 0x00010000>;
};
partition@f0000 {
label = "0:APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x00170000 0x00010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
flash@1 {
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "rootfs";
reg = <0x00000000 0x04000000>;
};
};
};
};
&blsp1_i2c3 {
status = "okay";
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
tpm@29 {
compatible = "atmel,at97sc3204t";
reg = <0x29>;
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
&gmac0 {
qcom,poll_required = <1>;
qcom,phy_mdio_addr = <4>;
vlan_tag = <2 0x20>;
};
&gmac1 {
qcom,poll_required = <1>;
qcom,phy_mdio_addr = <3>;
vlan_tag = <1 0x10>;
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

9
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
View File

@ -155,55 +155,46 @@
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "0:APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition7@170000 {
label = "0:ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition8@180000 {
label = "userconfig";
reg = <0x00180000 0x00080000>;
read-only;
};
partition9@200000 {
compatible = "denx,fit";
label = "firmware";

18
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts
View File

@ -119,7 +119,6 @@
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
@ -154,55 +153,46 @@
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition@180000 {
label = "userconfig";
reg = <0x00180000 0x00080000>;
read-only;
};
partition@200000 {
compatible = "denx,fit";
label = "firmware";
@ -222,6 +212,14 @@
status = "okay";
};
&gmac0 {
vlan_tag = <1 0x10>;
};
&gmac1 {
vlan_tag = <2 0x20>;
};
&usb2_hs_phy {
status = "okay";
};

11
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts
View File

@ -177,67 +177,56 @@
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00090000>;
read-only;
};
partition@180000 {
label = "ART";
reg = <0x00180000 0x00010000>;
read-only;
};
partition@190000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x00190000 0x14d0000>;
};
partition@1660000 {
label = "failsafe";
reg = <0x01660000 0x008F0000>;
read-only;
};
partition@1f50000 {
label = "u-boot-env";
reg = <0x01f50000 0x00010000>;
read-only;
};
partition@1f60000 {
label = "userconfig";
reg = <0x01f60000 0x000a0000>;

2
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts
View File

@ -16,8 +16,6 @@
*/
#include "qcom-ipq4018-ex61x0v2.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Netgear EX6100v2";

2
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts
View File

@ -16,8 +16,6 @@
*/
#include "qcom-ipq4018-ex61x0v2.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Netgear EX6150v2";

44
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
View File

@ -43,12 +43,6 @@
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
@ -61,14 +55,6 @@
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
@ -196,7 +182,6 @@
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
@ -216,7 +201,7 @@
mx25l12805d@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
spi-max-frequency = <45000000>;
partitions {
compatible = "fixed-partitions";
@ -268,7 +253,18 @@
partition7@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
compatible = "nvmem-cells";
read-only;
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition8@180000 {
@ -284,9 +280,21 @@
};
partition10@1a0000 {
compatible = "nvmem-cells";
label = "dnidata";
reg = <0x001a0000 0x00010000>;
read-only;
#address-cells = <1>;
#size-cells = <1>;
macaddr_dnidata_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_dnidata_c: macaddr@c {
reg = <0xc 0x6>;
};
};
partition11@1b0000 {
@ -320,8 +328,12 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_1000>, <&macaddr_dnidata_0>;
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_5000>, <&macaddr_dnidata_c>;
};

45
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6200v2.dts
View File

@ -1,45 +0,0 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2018, David Bauer <mail@david-bauer.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4018-ex61x0v2.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Netgear EX6200v2";
compatible = "netgear,ex6200v2";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
};
&wifi1 {
qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
};

12
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
View File

@ -189,74 +189,62 @@
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "APPSBLENV"; /* uboot env - empty */
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "urlader"; /* APPSBL */
reg = <0x000f0000 0x0002dc000>;
read-only;
};
partition7@11dc00 {
/* make a backup of this partition! */
label = "urlader_config";
reg = <0x0011dc00 0x00002400>;
read-only;
};
partition8@120000 {
label = "tffs1";
reg = <0x00120000 0x00080000>;
read-only;
};
partition9@1a0000 {
label = "tffs2";
reg = <0x001a0000 0x00080000>;
read-only;
};
partition10@220000 {
label = "uboot";
reg = <0x00220000 0x00080000>;
read-only;
};
partition11@2A0000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x002a0000 0x01c60000>;
};
partition12@1f00000 {
label = "jffs2";
reg = <0x01f00000 0x00100000>;

87
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-a1300.dts → target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts
View File

@ -6,14 +6,20 @@
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "GL.iNet GL-A1300";
compatible = "glinet,gl-a1300", "qcom,ipq4019";
model = "GL.iNet GL-AP1300";
compatible = "glinet,gl-ap1300";
aliases {
led-boot = &led_run;
led-failsafe = &led_run;
led-running = &led_run;
led-upgrade = &led_run;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &gmac0;
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
chosen {
@ -40,6 +46,7 @@
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
@ -93,35 +100,20 @@
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
switch {
label = "switch-button";
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_SETUP>;
};
};
leds {
compatible = "gpio-leds";
led_run: blue {
label = "blue:status";
led_power: power {
label = "green:power";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
white {
label = "white:status";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
};
gpio_export {
compatible = "gpio-export";
usb {
gpio-export,name = "usb_power";
gpio-export,output = <1>;
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
wan {
label = "green:wan";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
};
};
@ -142,6 +134,8 @@
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 5 GPIO_ACTIVE_HIGH>;
flash@0 {
status = "okay";
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
@ -197,6 +191,8 @@
reg = <0x00170000 0x00010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
@ -205,24 +201,13 @@
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
macaddr_gmac0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_gmac1: macaddr@6 {
reg = <0x6 0x6>;
};
};
partition@180000 {
label = "log";
reg = <0x00180000 0x00020000>;
};
};
};
spi-nand@1 {
status = "okay";
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
@ -255,14 +240,6 @@
};
};
i2c_0_pins: i2c_0_pinmux {
pinmux {
pins = "gpio58", "gpio59";
function = "blsp_i2c0";
bias-disable;
};
};
spi0_pins: spi0_pinmux {
mux_spi {
function = "blsp_spi0";
@ -281,12 +258,6 @@
};
};
&blsp1_i2c3 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
@ -301,10 +272,14 @@
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "GL-A1300";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "GL-AP1300";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "GL-A1300";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "GL-AP1300";
};

272
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts Normal file
View File

@ -0,0 +1,272 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "MikroTik hAP ac2";
compatible = "mikrotik,hap-ac2";
memory {
device_type = "memory";
reg = <0x80000000 0x08000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
led-boot = &led_user;
led-failsafe = &led_user;
led-running = &led_user;
led-upgrade = &led_user;
};
soc {
rng@22000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
phys = <&usb3_hs_phy>;
phy-names = "usb2-phy";
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
mode {
label = "mode";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
leds {
compatible = "gpio-leds";
power {
label = "green:power";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
default-state = "keep";
panic-indicator;
};
led_user: user {
label = "green:user";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
enable-usb-power {
gpio-hog;
gpios = <2 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "enable USB power";
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Qualcomm";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
label = "RouterBoot";
reg = <0x80000 0x80000>;
hard_config {
read-only;
size = <0x2000>;
};
dtb_config {
read-only;
};
soft_config {
};
};
partition@100000 {
compatible = "mikrotik,minor";
label = "firmware";
reg = <0x100000 0xf00000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&mdio {
status = "okay";
};
&ethphy0 {
qcom,single-led-1000;
qcom,single-led-100;
qcom,single-led-10;
};
&ethphy1 {
qcom,single-led-1000;
qcom,single-led-100;
qcom,single-led-10;
};
&ethphy2 {
qcom,single-led-1000;
qcom,single-led-100;
qcom,single-led-10;
};
&ethphy3 {
qcom,single-led-1000;
qcom,single-led-100;
qcom,single-led-10;
};
&ethphy4 {
qcom,single-led-1000;
qcom,single-led-100;
qcom,single-led-10;
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2";
};

31
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
View File

@ -195,6 +195,17 @@
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
@ -230,15 +241,31 @@
status = "okay";
};
&gmac0 {
qcom,poll_required = <1>;
qcom,poll_required_dynamic = <1>;
qcom,phy_mdio_addr = <3>;
vlan_tag = <1 0x10>;
};
&gmac1 {
qcom,poll_required = <1>;
qcom,poll_required_dynamic = <1>;
qcom,phy_mdio_addr = <4>;
vlan_tag = <2 0x20>;
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "8devices-Jalapeno";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "8devices-Jalapeno";
};

268
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts Normal file
View File

@ -0,0 +1,268 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "devolo Magic 2 WiFi next";
compatible = "devolo,magic-2-wifi-next";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
/delete-node/ ethernet-phy@0;
/delete-node/ ethernet-phy@1;
};
ess-psgmii@98000 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x3e>;
switch_wan_bmp = <0x0>;
};
edma@c080000 {
status = "okay";
qcom,num_gmac = <3>;
gmac0 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
/delete-property/ qcom,forced_speed;
/delete-property/ qcom,forced_duplex;
vlan_tag = <1 0x10>;
};
gmac1 {
qcom,phy_mdio_addr = <2>;
qcom,poll_required = <1>;
/delete-property/ qcom,forced_speed;
/delete-property/ qcom,forced_duplex;
vlan_tag = <1 0x08>;
};
gmac2 {
local-mac-address = [00 00 00 00 00 00];
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
/delete-property/ qcom,forced_speed;
/delete-property/ qcom,forced_duplex;
vlan_tag = <1 0x20>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
plc {
gpio-export,name = "plc-enable";
gpio-export,output = <1>;
gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
};
};
};
keys {
compatible = "gpio-keys";
wlan {
label = "WLAN";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "Reset";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
status_dlan {
label = "white:dlan";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
status_wlan {
label = "white:wlan";
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
error_dlan {
label = "red:dlan";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
default-state = "keep";
};
};
};
&tlmm {
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio61", "gpio60";
function = "blsp_uart0";
bias-disable;
};
};
button_pins: button_pinmux {
mux {
function = "gpio";
pins = "gpio0", "gpio5";
bias-disable;
input;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "devolo,magic-2-wifi-next";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "devolo,magic-2-wifi-next";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "n25q128a11";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
};
partition@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
firmware@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x00180000 0x01a80000>;
};
};
};
};

21
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
View File

@ -178,7 +178,6 @@
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
@ -195,7 +194,6 @@
output-low;
};
};
led_pins: led_pinmux {
mux {
pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
@ -212,10 +210,10 @@
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
mx25l25635f@0 {
compatible = "mx25l25635f", "jedec,spi-nor";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
spi-max-frequency = <50000000>;
status = "okay";
m25p,fast-read;
@ -229,72 +227,60 @@
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "APPSBL"; /* u-boot */
reg = <0x000e0000 0x00080000>;
/* U-Boot Standalone App "zloader" is located at 0x64000 */
read-only;
};
partition6@160000 {
label = "APPSBLENV"; /* u-boot env */
reg = <0x00160000 0x00010000>;
};
partition7@170000 {
/* make a backup of this partition! */
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
partition8@180000 {
label = "kernel";
reg = <0x00180000 0x00400000>;
};
partition9@580000 {
label = "dualflag";
reg = <0x00580000 0x00010000>;
read-only;
};
partition10@590000 {
label = "header";
reg = <0x00590000 0x00010000>;
};
partition11@5a0000 {
label = "romd";
reg = <0x005a0000 0x00100000>;
read-only;
};
partition12@6a0000 {
label = "not_root_data";
/*
@ -306,7 +292,6 @@
*/
reg = <0x006a0000 0x00100000>;
};
partition13@7a0000 {
label = "rootfs";
reg = <0x007a0000 0x01860000>;

197
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts Normal file
View File

@ -0,0 +1,197 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2017-2020, Sven Eckelmann <sven@narfation.org>
* Copyright (c) 2018, Marek Lindner <marek.lindner@kaiwoo.ai>
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Plasma Cloud PA1200";
compatible = "plasmacloud,pa1200";
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
aliases {
led-boot = &led_status_purple;
led-failsafe = &led_status_yellow;
led-running = &led_status_cyan;
led-upgrade = &led_status_yellow;
};
leds {
compatible = "gpio-leds";
led_status_cyan: status_cyan {
label = "cyan:status";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
led_status_purple: status_purple {
label = "purple:status";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
led_status_yellow: status_yellow {
label = "yellow:status";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
/* partitions are passed via bootloader */
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <2 0x20>;
};
&gmac1 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200";
};

15
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
View File

@ -6,12 +6,12 @@
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ASUS RT-AC58U / RT-AC1300UHP";
model = "ASUS RT-AC58U";
compatible = "asus,rt-ac58u";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
reg = <0x80000000 0x8000000>;
};
aliases {
@ -21,10 +21,6 @@
led-upgrade = &led_power;
};
chosen {
bootargs-append = " ubi.mtd=UBI_DEV";
};
soc {
rng@22000 {
status = "okay";
@ -272,12 +268,7 @@
#size-cells = <1>;
partition@0 {
/*
* TODO: change to label = "ubi" once we drop 4.14.
* also drop the bootargs-append and all the
* userspace CI_UBIPART="UBI_DEV" remains.
*/
label = "UBI_DEV";
label = "ubi";
reg = <0x00000000 0x08000000>;
};
};

251
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi Normal file
View File

@ -0,0 +1,251 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-ap.dk01.1.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
label-mac-device = &gmac0;
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
pinctrl@1000000 {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
i2c_0_pins: i2c_0_pinmux {
mux {
pins = "gpio58", "gpio59";
function = "blsp_i2c0";
bias-disable;
};
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 4 1>;
linux,code = <KEY_RESTART>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_out {
gpio-export,name = "gpio_out";
gpio-export,output = <0>;
gpio-export,direction_may_change = <0>;
gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
};
gpio_in {
gpio-export,name = "gpio_in";
gpio-export,input = <0>;
gpio-export,direction_may_change = <0>;
gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
};
};
};
};
&blsp1_i2c3 {
status = "okay";
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
clock-frequency = <400000>;
stm32_io: stm32@74 {
compatible = "tlt,stm32v1";
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&tlmm>;
interrupts = <5 2>;
reg = <0x74>;
};
};
&blsp1_spi1 {
cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
num-cs = <2>;
xt25f128b@0 {
/*
* Factory U-boot looks in 0:BOOTCONFIG partition for active
* partitions settings and mangles the partition config so
* 0:QSEE/0:QSEE_1, 0:CDT/0:CDT_1 and 0:APPSBL/0:APPSBL_1 pairs
* can be swaped. It isn't a problem but we never can be sure where
* OFW put factory images. "n25q128a11" is required for proper nor
* recognition in u-boot.
*/
compatible = "jedec,spi-nor", "n25q128a11";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:BOOTCONFIG";
reg = <0x60000 0x20000>;
read-only;
};
partition@80000 {
label = "0:BOOTCONFIG1";
reg = <0x80000 0x20000>;
read-only;
};
partition@a0000 {
label = "0:QSEE";
reg = <0xa0000 0x60000>;
read-only;
};
partition@100000 {
label = "0:QSEE_1";
reg = <0x100000 0x60000>;
read-only;
};
partition@160000 {
label = "0:CDT";
reg = <0x160000 0x10000>;
read-only;
};
partition@170000 {
label = "0:CDT_1";
reg = <0x170000 0x10000>;
read-only;
};
partition@180000 {
label = "0:DDRPARAMS";
reg = <0x180000 0x10000>;
read-only;
};
partition@190000 {
label = "0:APPSBLENV";
reg = <0x190000 0x10000>;
read-only;
};
partition@1a0000 {
label = "0:APPSBL";
reg = <0x1a0000 0xa0000>;
read-only;
};
partition@240000 {
label = "0:APPSBL_1";
reg = <0x240000 0xa0000>;
read-only;
};
partition@2e0000 {
label = "0:ART";
reg = <0x2e0000 0x10000>;
read-only;
};
config: partition@2f0000 {
label = "0:CONFIG";
reg = <0x2f0000 0x10000>;
read-only;
};
partition@300000 {
label = "0:CONFIG_RW";
reg = <0x300000 0x10000>;
read-only;
};
partition@310000 {
label = "0:EVENTSLOG";
reg = <0x310000 0x90000>;
read-only;
};
};
};
xt26g02a@1 {
/*
* Factory U-boot looks in 0:BOOTCONFIG partition for active
* partitions settings and mangles the partition config so
* rootfs/rootfs_1 pairs can be swaped.
* It isn't a problem but we never can be sure where OFW put
* factory images. "spinand,mt29f" value is required for proper
* nand recognition in u-boot.
*/
compatible = "spi-nand", "spinand,mt29f";
#address-cells = <1>;
#size-cells = <1>;
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "rootfs_1";
reg = <0x00000000 0x08000000>;
};
partition@8000000 {
label = "rootfs";
reg = <0x08000000 0x08000000>;
};
};
};
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 62 0>;
};

26
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx10.dts Normal file
View File

@ -0,0 +1,26 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4018-rutx.dtsi"
/ {
model = "Teltonika RUTX10";
compatible = "teltonika,rutx10";
soc {
leds {
compatible = "gpio-leds";
wifi2g {
label = "green:wifi2g";
gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wifi5g {
label = "green:wifi5g";
gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
};
};
};

241
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts Normal file
View File

@ -0,0 +1,241 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "MikroTik SXTsq 5 ac (RBSXTsqG-5acD)";
compatible = "mikrotik,sxtsq-5-ac";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
led-boot = &led_user;
led-failsafe = &led_user;
led-running = &led_user;
led-upgrade = &led_user;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
edma@c080000 {
status = "okay";
phy-mode = "rgmii";
qcom,num_gmac = <1>;
qcom,single-phy;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
power {
label = "blue:power";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
default-state = "keep";
panic-indicator;
};
led_user: user {
label = "green:user";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
rssilow {
label = "green:rssilow";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
rssimediumlow {
label = "green:rssimediumlow";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
rssimedium {
label = "green:rssimedium";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
rssimediumhigh {
label = "green:rssimediumhigh";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
};
rssihigh {
label = "green:rssihigh";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <2>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Qualcomm";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
label = "RouterBoot";
reg = <0x80000 0x80000>;
hard_config {
read-only;
};
dtb_config {
read-only;
};
soft_config {
};
};
partition@100000 {
compatible = "mikrotik,minor";
label = "firmware";
reg = <0x100000 0xf00000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-SXTsq-5-ac";
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x20>;
};
&mdio {
status = "okay";
};

382
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts Normal file
View File

@ -0,0 +1,382 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Netgear WAC510";
compatible = "netgear,wac510";
aliases {
led-boot = &led_power_amber;
led-failsafe = &led_power_amber;
led-running = &led_power_green;
led-upgrade = &led_power_amber;
label-mac-device = &gmac0;
};
chosen {
bootargs-append = " root=/dev/ubiblock0_1";
};
soc {
rng@22000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
ssr: ssr@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
spi-max-frequency = <1000000>;
};
};
leds {
compatible = "gpio-leds";
led_power_amber: led-0 {
label = "amber:power";
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_POWER;
gpios = <&ssr 6 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led_power_green: led-1 {
label = "green:power";
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_POWER;
gpios = <&ssr 5 GPIO_ACTIVE_LOW>;
};
led-2 {
/* 2.4GHz blue - activity */
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
function-enumerator = <0>;
gpios = <&ssr 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led-3 {
/* 2.4GHz green - link */
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WLAN;
function-enumerator = <0>;
gpios = <&ssr 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0radio";
};
led-4 {
/* 5GHz blue - activity */
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
function-enumerator = <1>;
gpios = <&ssr 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
led-5 {
/* 5GHz green - link */
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WLAN;
function-enumerator = <1>;
gpios = <&ssr 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1radio";
};
led-6 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_ACTIVITY;
gpios = <&ssr 0 GPIO_ACTIVE_LOW>;
};
};
};
&qpic_bam {
status = "okay";
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 59 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0x000e0000 0x00010000>;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0x000f0000 0x000f0000>;
read-only;
};
partition@1e0000 {
label = "0:MANUDATA";
reg = <0x001e0000 0x00010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_manudata_6: macaddr@6 {
reg = <0x6 0x6>;
};
};
partition@1f0000 {
label = "0:ART";
reg = <0x001f0000 0x00010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
nand@1 {
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <48000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "rootfs";
reg = <0x00000000 0x03800000>;
};
partition@3800000 {
label = "rootfs_1";
reg = <0x03800000 0x03800000>;
};
partition@7000000 {
label = "var_config";
reg = <0x07000000 0x00f00000>;
read-only;
};
partition@7f00000 {
label = "Oops_log";
reg = <0x07f00000 0x000c0000>;
read-only;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
};
&gmac0 {
qcom,forced_duplex = <1>;
qcom,forced_speed = <1000>;
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
vlan_tag = <1 0x10>;
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_1000>, <&macaddr_manudata_6>;
qcom,ath10k-calibration-variant = "Netgear-WAC510";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_5000>, <&macaddr_manudata_6>;
mac-address-increment = <16>;
qcom,ath10k-calibration-variant = "Netgear-WAC510";
};

1
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
View File

@ -145,7 +145,6 @@
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";

293
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts Normal file
View File

@ -0,0 +1,293 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Luma Home WRTQ-329ACN";
compatible = "luma,wrtq-329acn";
aliases {
ethernet0 = &gmac1;
ethernet1 = &gmac0;
};
i2c-gpio {
compatible = "i2c-gpio";
sda-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
#address-cells = <1>;
#size-cells = <0>;
/* No driver exists */
led_ring@48 {
compatible = "ti,msp430";
reg = <0x48>;
};
eeprom@50 {
compatible = "atmel,24c16";
reg = <0x50>;
pagesize = <16>;
read-only;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
/delete-node/ ethernet-phy@0;
/delete-node/ ethernet-phy@1;
/delete-node/ ethernet-phy@3;
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x1e>;
switch_wan_bmp = <0x20>;
};
edma@c080000 {
status = "okay";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 59 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x040000 0x020000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x060000 0x060000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0x0c0000 0x010000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0x0d0000 0x010000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0x0e0000 0x010000>;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0x0f0000 0x080000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x170000 0x010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
flash@1 {
status = "okay";
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x0000000 0x8000000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial0_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <2>;
qcom,poll_required = <1>;
};
&gmac1 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
};
&tlmm {
serial0_pins: serial0_pinmux {
mux {
function = "blsp_uart0";
pins = "gpio60", "gpio61";
bias-disable;
};
};
spi0_pins: spi0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
bias-disable;
drive-strength = <12>;
};
mux_cs {
function = "gpio";
pins = "gpio54", "gpio59";
bias-disable;
drive-strength = <2>;
output-high;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "Luma-WRTQ-329ACN";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "Luma-WRTQ-329ACN";
};

11
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts
View File

@ -81,7 +81,7 @@
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
linux,code = <KEY_RESTART >;
};
};
@ -137,7 +137,6 @@
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio12";
@ -185,6 +184,14 @@
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&usb2_hs_phy {
status = "okay";
};

314
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-c526a.dts
View File

@ -1,314 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "HiWiFi C526A";
compatible = "hiwifi,c526a";
aliases {
led-boot = &led_boot;
led-failsafe = &led_boot;
led-running = &led_sys;
led-upgrade = &led_sys;
};
chosen {
bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1";
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
leds {
compatible = "gpio-leds";
led_sys: blue {
label = "blue:sys";
gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
};
led_boot: red {
label = "red:sys";
gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
panic-indicator;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
};
partition@180000 {
label = "bdinfo";
reg = <0x180000 0x10000>;
read-only;
};
partition@190000 {
label = "debug";
reg = <0x190000 0x10000>;
read-only;
};
partition@1a0000 {
label = "oem";
reg = <0x1a0000 0x20000>;
read-only;
};
factory: partition@1c0000 {
label = "Factory";
reg = <0x1c0000 0x10000>;
read-only;
};
partition@1d0000 {
label = "hw_panic";
reg = <0x1d0000 0x10000>;
read-only;
};
partition@1e0000 {
label = "upgrade_config";
reg = <0x1e0000 0x10000>;
read-only;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&nand {
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x0 0x8000000>;
};
};
};
};
&pcie0 {
status = "okay";
perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
};
&qpic_bam {
status = "okay";
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_0_pins: serial0-pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
ieee80211-freq-limit = <5470000 5875000>;
qcom,ath10k-calibration-variant = "C526A";
};
&wifi1 {
status = "okay";
ieee80211-freq-limit = <5170000 5350000>;
qcom,ath10k-calibration-variant = "C526A";
};

99
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
View File

@ -16,10 +16,6 @@
led-upgrade = &led_sys;
};
chosen {
bootargs-append = " ubi.block=0,1 root=/dev/ubiblock0_1";
};
soc {
rng@22000 {
status = "okay";
@ -133,7 +129,7 @@
leds {
compatible = "gpio-leds";
led_usb: usb {
usb {
label = "blue:usb";
gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbport";
@ -201,11 +197,13 @@
};
&gmac0 {
mtd-mac-address = <&art 0x1006>;
nvmem-cells = <&macaddr_art_1006>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
mtd-mac-address = <&art 0x5006>;
nvmem-cells = <&macaddr_art_5006>;
nvmem-cell-names = "mac-address";
};
&nand {
@ -220,18 +218,95 @@
#size-cells = <1>;
partition@0 {
label = "Bootloader";
reg = <0x0 0xb00000>;
label = "SBL1";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "MIBIB";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "BOOTCONFIG";
reg = <0x200000 0x100000>;
};
partition@300000 {
label = "QSEE";
reg = <0x300000 0x100000>;
read-only;
};
partition@400000 {
label = "QSEE_1";
reg = <0x400000 0x100000>;
read-only;
};
partition@500000 {
label = "CDT";
reg = <0x500000 0x80000>;
read-only;
};
partition@580000 {
label = "CDT_1";
reg = <0x580000 0x80000>;
read-only;
};
partition@600000 {
label = "BOOTCONFIG1";
reg = <0x600000 0x80000>;
};
partition@680000 {
label = "APPSBLENV";
reg = <0x680000 0x80000>;
};
partition@700000 {
label = "APPSBL";
reg = <0x700000 0x200000>;
read-only;
};
partition@900000 {
label = "APPSBL_1";
reg = <0x900000 0x200000>;
read-only;
};
art: partition@b00000 {
label = "ART";
reg = <0xb00000 0x80000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
macaddr_art_1006: macaddr@1006 {
reg = <0x1006 0x6>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
macaddr_art_5006: macaddr@5006 {
reg = <0x5006 0x6>;
};
};
partition@b80000 {
label = "rootfs";
label = "ubi";
reg = <0xb80000 0x7480000>;
};
};
@ -291,10 +366,14 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "CM520-79F";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "CM520-79F";
};

33
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts
View File

@ -34,49 +34,52 @@
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x170000 0x10000>;
read-only;
};
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@180000 {
compatible = "denx,fit";
label = "firmware";
@ -85,3 +88,17 @@
};
};
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C1";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C1";
};

33
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts
View File

@ -34,47 +34,51 @@
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x170000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
@ -101,6 +105,7 @@
&tlmm {
nand_pins: nand-pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
@ -118,3 +123,17 @@
};
};
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C2";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C2";
};

12
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi
View File

@ -203,7 +203,6 @@
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
@ -234,7 +233,6 @@
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
@ -256,13 +254,3 @@
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
};

306
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts
View File

@ -1,23 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Device Tree Source for Linksys EA8300 (Dallas)
*
* Copyright (C) 2019 Jeff Kletsky
*
*/
/dts-v1/;
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
#include "qcom-ipq4019-xx8300.dtsi"
/ {
model = "Linksys EA8300 (Dallas)";
compatible = "linksys,ea8300", "qcom,ipq4019";
aliases {
led-boot = &led_wps_amber;
led-failsafe = &led_wps;
@ -26,6 +15,7 @@
serial0 = &blsp1_uart1;
};
leds {
compatible = "gpio-leds";
@ -73,304 +63,18 @@
keys {
compatible = "gpio-keys";
button@0 {
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
button@1 {
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
};
};
//
// OEM U-Boot provides either
// init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \
// root=ubi0:ubifs rootwait rw
// or the same with ubi.mtd=13,2048
//
chosen {
bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
dwc3@6000000 {
#address-cells = <1>;
#size-cells = <0>;
usb2_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&nand {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "sbl1";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "mibib";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "qsee";
reg = <0x200000 0x100000>;
read-only;
};
partition@300000 {
label = "cdt";
reg = <0x300000 0x80000>;
read-only;
};
partition@380000 {
label = "appsblenv";
reg = <0x380000 0x80000>;
read-only;
};
partition@400000 {
label = "ART";
reg = <0x400000 0x80000>;
read-only;
};
partition@480000 {
label = "appsbl";
reg = <0x480000 0x200000>;
read-only;
};
partition@680000 {
label = "u_env";
reg = <0x680000 0x80000>;
// writable -- U-Boot environment
};
partition@700000 {
label = "s_env";
reg = <0x700000 0x40000>;
// writable -- Boot counter records
};
partition@740000 {
label = "devinfo";
reg = <0x740000 0x40000>;
read-only;
};
partition@780000 {
label = "kernel";
reg = <0x780000 0x5800000>;
};
partition@a80000 {
label = "rootfs";
reg = <0xa80000 0x5500000>;
};
partition@5f80000 {
label = "alt_kernel";
reg = <0x5f80000 0x5800000>;
};
partition@6280000 {
label = "alt_rootfs";
reg = <0x6280000 0x5500000>;
};
partition@b780000 {
label = "sysdiag";
reg = <0xb780000 0x100000>;
read-only;
};
partition@b880000 {
label = "syscfg";
reg = <0xb880000 0x4680000>;
read-only;
};
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
reg = <0x00010000 0 0 0 0>;
};
};
};
&qpic_bam {
status = "okay";
};
&tlmm {
serial_0_pins: serial0-pinmux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
// gpio61 controls led_usb
pulldowns {
pins = "gpio55", "gpio56", "gpio57",
"gpio60", "gpio62", "gpio63",
"gpio64", "gpio65", "gpio66",
"gpio67", "gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&wifi0 {

33
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts
View File

@ -125,47 +125,55 @@
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "0:APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition7@170000 {
label = "0:ART";
reg = <0x00170000 0x00010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
precal_art_9000: precal@9000 {
reg = <0x9000 0x2f20>;
};
};
};
};
@ -181,6 +189,10 @@
status = "okay";
};
&gmac0 {
vlan_tag = <1 0x10>;
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
@ -196,7 +208,6 @@
label = "rootfs1";
reg = <0x00000000 0x04000000>;
};
partition@40000000 {
label = "ubi";
reg = <0x04000000 0x04000000>;
@ -220,6 +231,8 @@
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
reg = <0x00010000 0 0 0 0>;
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_9000>;
ieee80211-freq-limit = <5470000 5875000>;
qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
};
@ -276,11 +289,15 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
};
&wifi1 {
status = "okay";
ieee80211-freq-limit = <5170000 5350000>;
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
};

3
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
View File

@ -173,6 +173,9 @@
status = "okay";
nand@0 {
/delete-property/ nand-ecc-strength;
/delete-property/ nand-ecc-step-size;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;

3
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
View File

@ -68,7 +68,7 @@
edma@c080000 {
status = "okay";
phy-mode = "rgmii-rxid";
phy-mode = "rgmii-id";
qcom,num_gmac = <1>;
qcom,single-phy;
};
@ -137,7 +137,6 @@
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";

9
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
View File

@ -58,12 +58,13 @@
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
switch_lan_bmp = <0x30>;
switch_wan_bmp = <0x02>;
};
edma@c080000 {
status = "okay";
qcom,num_gmac = <1>;
};
};
@ -209,6 +210,10 @@
};
};
&gmac0 {
vlan_tag = <1 0x30>;
};
&cryptobam {
status = "okay";
};

388
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts Normal file
View File

@ -0,0 +1,388 @@
// SPDX-License-Identifier: GPL-2.0-only OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "GL.iNet GL-B2200";
compatible = "glinet,gl-b2200", "qcom,ipq4019";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
chosen {
bootargs-append = " root=/dev/mmcblk0p2 rw rootwait clk_ignore_unused";
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x2e>;
switch_wan_bmp = <0x10>;
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
linux,input-type = <1>;
};
reset {
label = "reset";
gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
linux,input-type = <1>;
};
};
leds {
compatible = "gpio-leds";
power_blue {
label = "blue:power";
gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
internet_blue {
label = "blue:internet";
gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
};
power_white {
label = "white:power";
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
};
internet_white {
label = "white:internet";
gpios = <&tlmm 66 GPIO_ACTIVE_LOW>;
};
};
};
&gmac1 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <2 0x10>;
};
&gmac0 {
vlan_tag = <1 0x2e>;
};
&vqmmc {
status = "okay";
};
&sdhci {
status = "okay";
pinctrl-0 = <&sd_pins>;
pinctrl-names = "default";
cd-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
vqmmc-supply = <&vqmmc>;
};
&blsp_dma {
status = "okay";
};
&cryptobam {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
precal_art_9000: precal@9000 {
reg = <0x9000 0x2f20>;
};
};
};
};
};
&blsp1_spi2 {
pinctrl-0 = <&spi_1_pins>;
pinctrl-names = "default";
status = "okay";
spidev1: spi@0 {
compatible = "siliconlabs,si3210";
reg = <0>;
spi-max-frequency = <24000000>;
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp1_uart2 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
pins = "gpio8", "gpio9",
"gpio10", "gpio11";
function = "blsp_uart1";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
};
pinconf {
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
spi_1_pins: spi_1_pinmux {
mux {
pins = "gpio44", "gpio46", "gpio47";
function = "blsp_spi1";
bias-disable;
};
cs {
pins = "gpio45";
function = "gpio";
bias-pull-up;
};
reset {
pins = "gpio43";
function = "gpio";
output-high;
};
mux_2 {
pins = "gpio35";
function = "gpio";
output-high;
};
host_int {
pins = "gpio2";
function = "gpio";
input;
};
wake {
pins = "gpio48";
function = "gpio";
output-high;
};
};
sd_pins: sd_pins {
pinmux {
function = "sdio";
pins = "gpio23", "gpio24", "gpio25", "gpio26",
"gpio29", "gpio30", "gpio31", "gpio32";
drive-strength = <10>;
};
pinmux_sd_clk {
function = "sdio";
pins = "gpio27";
drive-strength = <16>;
};
pinmux_sd7 {
function = "sdio";
pins = "gpio28";
drive-strength = <10>;
bias-disable;
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
status = "okay";
/* Bootlog shows this is a 168c:0056 - QCA 9888v2 */
compatible = "qcom,ath10k";
reg = <0x00010000 0 0 0 0>;
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_9000>;
qcom,ath10k-calibration-variant = "GL-B2200";
ieee80211-freq-limit = <5450000 5900000>;
};
};
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "GL-B2200";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "GL-B2200";
ieee80211-freq-limit = <5100000 5400000>;
};

26
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
View File

@ -250,54 +250,56 @@
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV"; /* uboot env */
reg = <0x000e0000 0x00010000>;
read-only;
};
partition@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@180000 {
label = "cfg";
reg = <0x00180000 0x00040000>;
};
partition@1c0000 {
label = "firmware";
compatible = "denx,fit";
@ -343,13 +345,15 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "8devices-Habanero";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "8devices-Habanero";
};

327
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts Normal file
View File

@ -0,0 +1,327 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "MikroTik hAP ac3";
compatible = "mikrotik,hap-ac3";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
led-boot = &led_status_blue;
led-failsafe = &led_status_red;
led-running = &led_status_blue;
led-upgrade = &led_status_red;
};
soc {
rng@22000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2: usb2@60f8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
mode {
label = "mode";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
led {
label = "led";
gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_status_blue: status-blue {
label = "blue:status";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
led_status_red: status-red {
label = "red:status";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
led_status_green: status-green {
label = "green:status";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "green:wlan";
gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
};
ethernet {
label = "green:ethernet";
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
};
wan {
label = "green:wan";
gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
};
lan1 {
label = "green:lan1";
gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
};
lan2 {
label = "green:lan2";
gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
};
lan3 {
label = "green:lan3";
gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
};
lan4 {
label = "green:lan4";
gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
};
poe {
label = "red:poe";
gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio55", "gpio56", "gpio57", "gpio60",
"gpio62", "gpio63", "gpio64", "gpio65",
"gpio66", "gpio67", "gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
enable-usb-power {
gpio-hog;
gpios = <44 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "enable USB power";
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Qualcomm";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
label = "RouterBoot";
reg = <0x80000 0x80000>;
hard_config {
read-only;
size = <0x2000>;
};
dtb_config {
read-only;
};
soft_config {
};
};
};
};
};
&qpic_bam {
status = "okay";
};
&nand {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0xa00000>;
};
partition@a00000 {
label = "ubi";
reg = <0xa00000 0x7600000>;
};
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&mdio {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-hAP-ac3";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "MikroTik-hAP-ac3";
};

268
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts Normal file
View File

@ -0,0 +1,268 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (c) 2019, Robert Marko <robimarko@gmail.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Mikrotik Wireless Wire Dish LHGG-60ad";
compatible = "mikrotik,lhgg-60ad";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
led-boot = &user;
led-failsafe = &user;
led-running = &user;
led-upgrade = &user;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
/delete-node/ ethernet-phy@1;
/delete-node/ ethernet-phy@2;
/delete-node/ ethernet-phy@3;
/delete-node/ ethernet-phy@4;
/delete-node/ psgmii-phy@5;
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
switch_lan_bmp = <0x0>; /* lan port bitmap */
switch_wan_bmp = <0x10>; /* wan port bitmap */
};
edma@c080000 {
status = "okay";
phy-mode = "rgmii-id";
qcom,num_gmac = <1>;
qcom,single-phy;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
power: power {
label = "blue:power";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
default-state = "keep";
panic-indicator;
};
user: user {
label = "yellow:user";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "green:wlan";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
};
align-left {
label = "green:align-left";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
align-right {
label = "green:align-right";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
wlan-rx {
label = "green:align-down";
gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
};
wlan-tx {
label = "green:align-up";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi-0-pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
bias-disable;
output-high;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
status = "okay";
m25p80@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Qualcomm";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
label = "RouterBoot";
reg = <0x80000 0x80000>;
hard_config {
read-only;
size = <0x2000>;
};
dtb_config {
read-only;
};
soft_config {
};
};
partition@100000 {
compatible = "mikrotik,minor";
label = "firmware";
reg = <0x100000 0xf00000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 42 GPIO_ACTIVE_HIGH>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
/* wil6210 802.11ad card */
wifi: wifi@1,0 {
status = "okay";
/* wil6210 driver has no compatible */
reg = <0x00010000 0 0 0 0>;
};
};
};
&gmac0 {
qcom,phy_mdio_addr = <0>;
qcom,poll_required = <1>;
vlan_tag = <0 0x20>;
};

123
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
View File

@ -1,10 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
#include <dt-bindings/leds/common.h>
/ {
model = "ASUS Lyra MAP-AC2200";
@ -177,7 +177,6 @@
bias-pull-down;
};
};
enable_ext_pa_high {
gpio-hog;
gpios = <44 GPIO_ACTIVE_HIGH>,
@ -186,7 +185,6 @@
bias-pull-down;
line-name = "enable external PA output-high";
};
enable_ext_pa_low {
gpio-hog;
gpios = <45 GPIO_ACTIVE_HIGH>,
@ -255,69 +253,96 @@
/* 9-channel RGB LED controller */
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = [01];
clock-mode = /bits/ 8 <1>;
#address-cells = <1>;
#size-cells = <0>;
led_blue0: blue0 {
chan-name = "blue0";
label = "blue:chan0";
led-cur = [fa];
max-cur = [ff];
/*
* There is only one single extremely bright RGB-LED.
* The RGB-color channels are running in parallel to
* increase the current delivery capabilities beyond
* what a single PWM-output of the controller can do.
*/
led_blue0: led@0 {
chan-name = "blue-0";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
reg = <0>;
color = <LED_COLOR_ID_BLUE>;
function-enumerator = <0>;
};
blue1 {
chan-name = "blue1";
label = "blue:chan1";
led-cur = [fa];
max-cur = [ff];
led@1 {
chan-name = "blue-1";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
reg = <1>;
color = <LED_COLOR_ID_BLUE>;
function-enumerator = <1>;
};
blue2 {
chan-name = "blue2";
label = "blue:chan2";
led-cur = [fa];
max-cur = [ff];
led@2 {
chan-name = "blue-2";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
reg = <2>;
color = <LED_COLOR_ID_BLUE>;
function-enumerator = <2>;
};
led_green0: green0 {
chan-name = "green0";
label = "green:chan0";
led-cur = [fa];
max-cur = [ff];
led_green0: led@3 {
chan-name = "green-0";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
reg = <3>;
color = <LED_COLOR_ID_GREEN>;
function-enumerator = <0>;
};
green1 {
chan-name = "green1";
label = "green:chan1";
led-cur = [fa];
max-cur = [ff];
led@4 {
chan-name = "green-1";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
reg = <4>;
color = <LED_COLOR_ID_GREEN>;
function-enumerator = <1>;
};
green2 {
chan-name = "green2";
label = "green:chan2";
led-cur = [fa];
max-cur = [ff];
led@5 {
chan-name = "green-2";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
reg = <5>;
color = <LED_COLOR_ID_GREEN>;
function-enumerator = <2>;
};
led_red0: red0 {
chan-name = "red0";
label = "red:chan0";
led-cur = [fa];
max-cur = [ff];
led_red0: led@6 {
chan-name = "red-0";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
reg = <6>;
color = <LED_COLOR_ID_RED>;
function-enumerator = <0>;
};
red1 {
chan-name = "red1";
label = "red:chan1";
led-cur = [fa];
max-cur = [ff];
led@7 {
chan-name = "red-1";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
reg = <7>;
color = <LED_COLOR_ID_RED>;
function-enumerator = <1>;
};
red2 {
chan-name = "red2";
label = "red:chan2";
led-cur = [fa];
max-cur = [ff];
led@8 {
chan-name = "red-2";
led-cur = /bits/ 8 <0xfa>;
max-cur = /bits/ 8 <0xff>;
reg = <8>;
color = <LED_COLOR_ID_RED>;
function-enumerator = <2>;
};
};
};

435
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts Normal file
View File

@ -0,0 +1,435 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/soc/qcom,tcsr.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "ZTE MF286D";
compatible = "zte,mf286d";
aliases {
led-boot = &led_internal;
led-failsafe = &led_internal;
led-running = &led_internal;
led-upgrade = &led_internal;
};
chosen {
/*
* bootargs forced by u-boot bootipq command:
* 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
*/
bootargs-append = " root=/dev/ubiblock0_1";
};
gpio-restart {
compatible = "gpio-restart";
gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
};
leds {
compatible = "gpio-leds";
led_internal: led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
label = "blue:internal_led";
default-state = "keep";
};
led-1 {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
keys {
compatible = "gpio-keys";
wifi {
label = "wifi";
linux,code = <KEY_RFKILL>;
gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
};
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
/* u-boot is looking for "n25q128a11" property */
compatible = "jedec,spi-nor", "n25q128a11";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0xc0000>;
read-only;
};
partition@1b0000 {
label = "0:reserved1";
reg = <0x1b0000 0x50000>;
read-only;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_config_0>;
};
&gmac1 {
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_config_0>;
mac-address-increment = <1>;
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "fota-flag";
reg = <0x0 0xa0000>;
read-only;
};
partition@a0000 {
label = "ART";
reg = <0xa0000 0x80000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@120000 {
label = "mac";
reg = <0x120000 0x80000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_config_0: macaddr@0 {
reg = <0x0 0x6>;
};
};
partition@1a0000 {
label = "reserved2";
reg = <0x1a0000 0xc0000>;
read-only;
};
partition@260000 {
label = "cfg-param";
reg = <0x260000 0x400000>;
read-only;
};
partition@660000 {
label = "log";
reg = <0x660000 0x400000>;
};
partition@a60000 {
label = "oops";
reg = <0xa60000 0xa0000>;
};
partition@b00000 {
label = "reserved3";
reg = <0xb00000 0x500000>;
read-only;
};
partition@1000000 {
label = "web";
reg = <0x1000000 0x800000>;
};
partition@1800000 {
label = "rootfs";
reg = <0x1800000 0x1d00000>;
};
partition@3500000 {
label = "data";
reg = <0x3500000 0x1900000>;
};
partition@4e00000 {
label = "fota";
reg = <0x4e00000 0x3200000>;
};
};
};
};
&qpic_bam {
status = "okay";
};
&tlmm {
i2c_0_pins: i2c_0_pinmux {
mux {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio52", "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio69";
function = "qpic";
bias-pull-down;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_1000>, <&macaddr_config_0>;
mac-address-increment = <2>;
qcom,ath10k-calibration-variant = "zte,mf286d";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_5000>, <&macaddr_config_0>;
mac-address-increment = <3>;
qcom,ath10k-calibration-variant = "zte,mf286d";
};

442
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf289f.dts Normal file
View File

@ -0,0 +1,442 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/soc/qcom,tcsr.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "ZTE MF289F";
compatible = "zte,mf289f";
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
chosen {
/*
* bootargs forced by u-boot bootipq command:
* 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
*/
bootargs-append = " root=/dev/ubiblock0_1";
};
/*
* This node is used to restart modem module to avoid anomalous
* behaviours on initial communication.
*/
gpio-restart {
compatible = "gpio-restart";
gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
};
leds {
compatible = "gpio-leds";
led_status: led-0 {
label = "blue:power";
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_BLUE>;
gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
};
led-1 {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_BLUE>;
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
keys {
compatible = "gpio-keys";
key-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
};
key-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
};
};
soc {
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x20>;
switch_wan_bmp = <0x4>;
};
edma@c080000 {
status = "okay";
};
};
};
&prng {
status = "okay";
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
};
&watchdog {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&usb2 {
status = "okay";
};
&usb3 {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>,
<&tlmm 54 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0xc0000>;
read-only;
};
partition@1b0000 {
label = "0:reserved1";
reg = <0x1b0000 0x50000>;
read-only;
};
};
};
spi-nand@1 { /* flash@1 ? */
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "fota-flag";
reg = <0x0 0xa0000>;
read-only;
};
partition@a0000 {
label = "ART";
reg = <0xa0000 0x80000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@120000 {
label = "mac";
reg = <0x120000 0x80000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_mac_0: macaddr@0 {
reg = <0x0 0x6>;
};
};
partition@1a0000 {
label = "reserved2";
reg = <0x1a0000 0xc0000>;
read-only;
};
partition@260000 {
label = "cfg-param";
reg = <0x260000 0x400000>;
read-only;
};
partition@660000 {
label = "log";
reg = <0x660000 0x400000>;
};
partition@a60000 {
label = "oops";
reg = <0xa60000 0xa0000>;
};
partition@b00000 {
label = "reserved3";
reg = <0xb00000 0x500000>;
read-only;
};
partition@1000000 {
label = "web";
reg = <0x1000000 0x800000>;
};
partition@1800000 {
label = "rootfs";
reg = <0x1800000 0x1d00000>;
};
partition@3500000 {
label = "data";
reg = <0x3500000 0x1900000>;
};
partition@4e00000 {
label = "fota";
reg = <0x4e00000 0x3200000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&crypto {
status = "okay";
};
&cryptobam {
status = "okay";
};
&gmac0 {
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_mac_0>;
vlan_tag = <1 0x20>;
};
&gmac1 {
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_mac_0>;
mac-address-increment = <1>;
vlan_tag = <2 0x4>;
};
&qpic_bam {
status = "okay";
};
&tlmm {
i2c_0_pins: i2c_0_pinmux {
mux {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12", "gpio54";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0>;
mac-address-increment = <2>;
qcom,ath10k-calibration-variant = "zte,mf289f";
};
/* This node is used only on AT2 version for 5Ghz on IPQ4019 with board-id=21 */
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0>;
mac-address-increment = <3>;
qcom,ath10k-calibration-variant = "zte,mf289f";
};
/* This node is used only on AT1 version for 5Ghz on QCA9984 */
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>;
clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_mac_0>;
mac-address-increment = <4>;
compatible = "qcom,ath10k";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "zte,mf289f";
};
};
};

80
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts Normal file
View File

@ -0,0 +1,80 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-xx8300.dtsi"
/ {
model = "Linksys MR8300 (Dallas)";
compatible = "linksys,mr8300", "qcom,ipq4019";
aliases {
led-boot = &led_blue;
led-failsafe = &led_red;
led-running = &led_blue;
led-upgrade = &led_amber;
serial0 = &blsp1_uart1;
};
// Top panel LEDs, above Linksys logo
leds {
compatible = "gpio-leds";
led_red: red {
label = "red:alarm";
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
};
led_amber: amber {
label = "amber:programming";
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
led_blue: blue {
label = "blue:power";
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
};
// On back panel, above USB socket
led_usb: usb {
label = "green:usb";
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb3_port1>, <&usb3_port2>,
<&usb2_port1>;
linux,default-trigger = "usbport";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "linksys-mr8300-v0-fcc";
};
&wifi1 {
status = "okay";
ieee80211-freq-limit = <5170000 5330000>;
qcom,ath10k-calibration-variant = "linksys-mr8300-v0-fcc";
};
&wifi2 {
status = "okay";
ieee80211-freq-limit = <5490000 5835000>;
qcom,ath10k-calibration-variant = "linksys-mr8300-v0-fcc";
};

354
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-oap100.dts Normal file
View File

@ -0,0 +1,354 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "EdgeCore OAP-100";
compatible = "edgecore,oap100";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
chosen {
bootargs-append = " root=/dev/ubiblock0_1";
};
soc {
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
usb2@60f8800 {
status = "okay";
dwc3@6000000 {
#address-cells = <1>;
#size-cells = <0>;
usb2_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_mac_mode = <0x0>; /* mac mode for RGMII RMII */
switch_initvlas = <0x0007c 0x54>; /* port0 status */
switch_lan_bmp = <0x10>;
};
edma@c080000 {
status = "okay";
};
};
key {
compatible = "gpio-keys";
button@1 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
};
};
leds {
compatible = "gpio-leds";
led_system: led_system {
label = "green:system";
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
};
led_2g {
label = "blue:wlan2g";
gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
};
led_5g {
label = "blue:wlan5g";
gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb {
gpio-export,name = "usb-power";
gpio-export,output = <1>;
gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
};
poe {
gpio-export,name = "poe-power";
gpio-export,output = <0>;
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
};
};
};
&tlmm {
serial_0_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
};
&cryptobam {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "gd25q256";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "0:SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV";
reg = <0x000e0000 0x00010000>;
read-only;
};
partition6@f0000 {
label = "0:APPSBL";
reg = <0x000f0000 0x00080000>;
read-only;
};
partition7@170000 {
label = "0:ART";
reg = <0x00170000 0x00010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "rootfs";
reg = <0x00000000 0x4000000>;
};
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "Edgecore OAP100";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "Edgecore OAP100";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

325
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi Normal file
View File

@ -0,0 +1,325 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
aliases {
led-boot = &led_status_white;
led-failsafe = &led_status_red;
led-running = &led_status_green;
led-upgrade = &led_status_blue;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
counter@4a1000 {
compatible = "qcom,qca-gcnt";
reg = <0x4a1000 0x4>;
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
status = "okay";
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x1c>;
switch_wan_bmp = <0x02>;
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led-0 {
label = "green:power";
gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led-1 {
label = "red:power";
gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
panic-indicator;
};
led_status_green: led-2 {
label = "green:status";
gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
};
led_status_red: led-3 {
label = "red:status";
gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
};
led_status_blue: led-4 {
label = "blue:status";
gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
};
led_status_white: led-5 {
label = "white:status";
gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
};
};
};
&vqmmc {
status = "okay";
};
&sdhci {
status = "okay";
pinctrl-0 = <&sd_pins>;
pinctrl-names = "default";
cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
vqmmc-supply = <&vqmmc>;
};
&qpic_bam {
status = "okay";
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
i2c_0_pins: i2c_0_pinmux {
pinmux {
function = "blsp_i2c0";
pins = "gpio58", "gpio59";
bias-disable;
};
};
sd_pins: sd_pins {
pinmux {
function = "sdio";
pins = "gpio23", "gpio24", "gpio25", "gpio26",
"gpio28", "gpio29", "gpio30", "gpio31";
drive-strength = <10>;
};
pinmux_sd_clk {
function = "sdio";
pins = "gpio27";
drive-strength = <16>;
};
pinmux_sd7 {
function = "sdio";
pins = "gpio32";
drive-strength = <10>;
bias-disable;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_i2c3 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
led-controller@27 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,tlc59108"; /* really is tlc59208f */
reg = <0x27>;
led0@0 {
label = "rgb:led0";
reg = <0x0>;
linux,default-trigger = "default-on";
};
led1@1 {
label = "rgb:led1";
reg = <0x1>;
linux,default-trigger = "default-on";
};
led2@2 {
label = "rgb:led2";
reg = <0x2>;
linux,default-trigger = "default-on";
};
led3@3 {
label = "rgb:led3";
reg = <0x3>;
linux,default-trigger = "default-on";
};
led4@4 {
label = "rgb:led4";
reg = <0x4>;
linux,default-trigger = "default-on";
};
led5@5 {
label = "rgb:led5";
reg = <0x5>;
linux,default-trigger = "default-on";
};
led6@6 {
label = "rgb:led6";
reg = <0x6>;
linux,default-trigger = "default-on";
};
led7@7 {
label = "rgb:led7";
reg = <0x7>;
linux,default-trigger = "default-on";
};
};
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&gmac0 {
vlan_tag = <1 0x1c>;
};
&gmac1 {
qcom,phy_mdio_addr = <0>;
vlan_tag = <2 0x02>;
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
ieee80211-freq-limit = <5470000 5875000>;
qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60";
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60";
};

216
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ca100.dts → target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts
View File

@ -1,4 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2017-2020, Sven Eckelmann <sven@narfation.org>
* Copyright (c) 2018, Marek Lindner <marek.lindner@kaiwoo.ai>
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
@ -6,15 +9,8 @@
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "LEGUANG CA100";
compatible = "leguang,ca100", "qcom,ipq4019";
aliases {
led-boot = &led_status_blue;
led-failsafe = &led_status_red;
led-running = &led_status_blue;
led-upgrade = &led_status_green;
};
model = "Plasma Cloud PA2200";
compatible = "plasmacloud,pa2200";
soc {
rng@22000 {
@ -23,8 +19,6 @@
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
@ -37,13 +31,6 @@
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
@ -65,6 +52,9 @@
};
ess-switch@c000000 {
switch_lan_bmp = <0x10>;
switch_wan_bmp = <0x20>;
status = "okay";
};
@ -79,26 +69,72 @@
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
linux,code = <KEY_RESTART >;
};
};
aliases {
led-boot = &led_power_orange;
led-failsafe = &led_status_blue;
led-running = &led_power_orange;
led-upgrade = &led_status_blue;
};
leds {
compatible = "gpio-leds";
led_status_green: status-green {
label = "green:status";
gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
led_power_orange: power_orange {
label = "orange:power";
gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
};
led_status_red: status-red {
label = "red:status";
gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
};
led_status_blue: status-blue {
label = "blue:status";
2g_blue {
label = "blue:2g";
gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
2g_green {
label = "green:5g1";
gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
5g2_green {
label = "green:5g2";
gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy2tpt";
};
led_status_blue: status_blue {
label = "blue:status";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pin {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
@ -114,69 +150,12 @@
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
};
partition@180000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x180000 0x1e80000>;
};
};
/* partitions are passed via bootloader */
};
};
@ -190,51 +169,42 @@
status = "okay";
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
&gmac0 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200";
ieee80211-freq-limit = <5170000 5350000>;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200";
ieee80211-freq-limit = <5470000 5875000>;
};

10
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts
View File

@ -7,8 +7,12 @@
compatible = "p2w,r619ac-128m";
};
&rootfs_part1 {
&nand_rootfs {
/*
* Watch out: stock MIBIB is set up for a 64MiB chip.
* If a 128MiB flash chip is used, make sure to have
* the right values in MIBIB or the device might not
* boot.
*/
reg = <0x0 0x8000000>;
};
/delete-node/ &rootfs_part2;

12
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac-64m.dts Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-r619ac.dtsi"
/ {
model = "P&W R619AC 64M";
compatible = "p2w,r619ac-64m";
};
&nand_rootfs {
reg = <0x0 0x4000000>;
};

8
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dts
View File

@ -1,8 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-r619ac.dtsi"
/ {
model = "P&W R619AC";
compatible = "p2w,r619ac";
};

121
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
View File

@ -4,8 +4,13 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
#include <dt-bindings/leds/common.h>
/ {
chosen {
bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1";
};
aliases {
led-boot = &led_sys;
led-failsafe = &led_sys;
@ -14,10 +19,6 @@
label-mac-device = &gmac0;
};
chosen {
bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
};
soc {
rng@22000 {
status = "okay";
@ -84,24 +85,30 @@
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_sys: sys {
led_sys: led-0 {
label = "blue:sys";
gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_POWER;
};
wlan2g {
led-1 {
label = "blue:wlan2g";
gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
function-enumerator = <0>;
};
wlan5g {
led-2 {
label = "blue:wlan5g";
gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
function-enumerator = <1>;
};
};
@ -175,21 +182,38 @@
read-only;
};
partition@1 {
label = "Bootloader";
reg = <0x0 0x170000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
};
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
partition@180000 {
label = "unused";
reg = <0x180000 0xe80000>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
};
&nand {
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
nand_rootfs: partition@0 {
label = "ubi";
/* reg defined in 64M/128M variant dts. */
};
};
};
@ -205,33 +229,11 @@
status = "okay";
};
&nand {
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
rootfs_part1: partition@0 {
label = "rootfs";
reg = <0x0 0x4000000>;
};
rootfs_part2: partition@4000000 {
label = "reserve";
reg = <0x4000000 0x4000000>;
};
};
};
};
&pcie0 {
status = "okay";
pinctrl-0 = <&pcie_pins>;
pinctrl-names = "default";
perst-gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie_pins>;
perst-gpio = <&tlmm 4 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 40 GPIO_ACTIVE_HIGH>;
/* Free slot for use */
@ -259,8 +261,8 @@
mux {
pins = "gpio2";
function = "gpio";
bias-pull-down;
output-low;
bias-pull-down;
};
};
@ -299,29 +301,6 @@
bias-disable;
};
};
led_pins: led_pinmux {
mux {
pins = "gpio32", "gpio39", "gpio50";
function = "gpio";
bias-pull-up;
output-low;
};
mux_1 {
pins = "gpio52";
function = "gpio";
bias-pull-up;
output-high;
};
mux_2 {
pins = "gpio61";
function = "gpio";
bias-pull-down;
output-high;
};
};
};
&ethphy0 {
@ -372,10 +351,14 @@
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "R619AC";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "P&W-R619AC";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "R619AC";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "P&W-R619AC";
};

30
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts Normal file
View File

@ -0,0 +1,30 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-orbi.dtsi"
/ {
model = "NETGEAR RBR50";
compatible = "netgear,rbr50";
chosen {
bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_ALT)ro,256K(0:CDT)ro,256K(0:CDT_ALT)ro,256K(0:DDRPARAMS)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_ALT)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,1457651200(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait";
};
soc {
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
};
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

30
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts Normal file
View File

@ -0,0 +1,30 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-orbi.dtsi"
/ {
model = "NETGEAR RBS50";
compatible = "netgear,rbs50";
chosen {
bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_ALT)ro,256K(0:CDT)ro,256K(0:CDT_ALT)ro,256K(0:DDRPARAMS)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_ALT)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,1457651200(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait";
};
soc {
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
};
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

283
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rt-acrh17.dts → target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rt-ac42u.dts
View File

@ -1,43 +1,25 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2019 X-WRT <dev@x-wrt.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ASUS RT-ACRH17";
compatible = "asus,rt-acrh17";
model = "ASUS RT-AC42U";
compatible = "asus,rt-ac42u";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
reg = <0x80000000 0x10000000>; /* 256MB */
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs-append = " ubi.mtd=UBI_DEV";
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
soc {
@ -77,12 +59,23 @@
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
@ -121,50 +114,70 @@
leds {
compatible = "gpio-leds";
power: status {
label = "blue:status";
led_power: led-0 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
label = "blue:status";
};
lan1 {
label = "blue:lan1";
led-1 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WAN;
gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "90000.mdio-1:04:link";
};
led-2 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_WAN;
gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
};
led-3 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
function-enumerator = <0>;
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
led-4 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
function-enumerator = <1>;
gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led-5 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "blue:lan2";
led-6 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "blue:lan3";
led-7 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_LAN;
function-enumerator = <3>;
gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "blue:lan4";
led-8 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_LAN;
function-enumerator = <4>;
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
};
wan_blue {
label = "blue:wan";
gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
};
wan_red {
label = "red:wan";
gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "blue:wlan2g";
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "blue:wlan5g";
gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
};
};
};
@ -180,6 +193,38 @@
status = "okay";
};
&tlmm {
serial_0_pins: serial0_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio55", "gpio56", "gpio57", "gpio60",
"gpio62", "gpio63", "gpio64", "gpio65",
"gpio66", "gpio67", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
@ -192,77 +237,43 @@
#size-cells = <1>;
partition@0 {
label = "Bootloader";
reg = <0x000000000000 0x000000400000>;
label = "SBL1";
reg = <0x00000000 0x00080000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x00080000 0x00080000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x00100000 0x00100000>;
read-only;
};
partition@200000 {
label = "CDT";
reg = <0x00200000 0x00080000>;
read-only;
};
partition@280000 {
label = "APPSBL";
reg = <0x00280000 0x00140000>;
read-only;
};
partition@3C0000 {
label = "APPSBLENV";
reg = <0x003C0000 0x00040000>;
read-only;
};
partition@400000 {
label = "UBI_DEV";
reg = <0x000000400000 0x000007C00000>;
label = "ubi";
reg = <0x00400000 0x07C00000>;
};
};
};
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio55", "gpio56",
"gpio57", "gpio60",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
};
};
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-ACRH17";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
@ -271,6 +282,28 @@
status = "okay";
};
&usb2_hs_phy {
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ASUS-RT-AC42U";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "ASUS-RT-AC42U";
};
};
};

12
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srr60.dts Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-orbi.dtsi"
/ {
model = "NETGEAR SRR60";
compatible = "netgear,srr60";
chosen {
bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_1)ro,256K(0:CDT)ro,256K(0:CDT_1)ro,512K(0:BOOTCONFIG1)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_1)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,64K(cert)ro,3840K(kernel-2)ro,31488K(rootfs-2)ro,35328K@44881K(firmware-2)ro,5M(device_table)ro,17M(cp_file)ro,102737K(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait";
};
};

12
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srs60.dts Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-orbi.dtsi"
/ {
model = "NETGEAR SRS60";
compatible = "netgear,srs60";
chosen {
bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_1)ro,256K(0:CDT)ro,256K(0:CDT_1)ro,512K(0:BOOTCONFIG1)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_1)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,64K(cert)ro,3840K(kernel-2)ro,31488K(rootfs-2)ro,35328K@44881K(firmware-2)ro,5M(device_table)ro,17M(cp_file)ro,102737K(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait";
};
};

22
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts
View File

@ -1,7 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "qcom-ipq4019-u4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@ -33,49 +31,52 @@
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "0:APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "0:ART";
reg = <0x170000 0x10000>;
read-only;
};
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@180000 {
compatible = "denx,fit";
label = "firmware";
@ -84,3 +85,4 @@
};
};
};

6
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi
View File

@ -154,7 +154,6 @@
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
@ -169,7 +168,6 @@
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
pins = "gpio8", "gpio9";
@ -219,8 +217,12 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
};

35
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
View File

@ -36,7 +36,6 @@
reg = <0x87000000 0x500000>;
no-map;
};
wifi_dump@87500000 {
reg = <0x87500000 0x600000>;
no-map;
@ -50,7 +49,7 @@
};
chosen {
bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused";
bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1";
};
soc {
@ -132,7 +131,6 @@
function = "led0";
bias-pull-down;
};
mux_2 {
pins = "gpio40";
function = "led4";
@ -208,6 +206,17 @@
label = "0:ART";
reg = <0x170000 0x010000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
@ -362,10 +371,30 @@
};
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <2 0x20>;
};
&gmac1 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
};

64
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wr142ac-nand.dts
View File

@ -1,64 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-wr142ac.dtsi"
/ {
model = "Century WR142AC NAND";
compatible = "century,wr142ac-nand";
chosen {
bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
};
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Bootloader";
reg = <0x0 0x170000>;
};
partition@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
};
partition@180000 {
label = "oem-firmware";
reg = <0x180000 0x1e80000>;
};
};
};
};
&nand {
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "rootfs";
reg = <0x0 0x8000000>;
};
};
};
};

46
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
View File

@ -254,7 +254,8 @@
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_9000>, <&macaddr_orgdata_32>;
qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP";
};
};
@ -340,10 +341,25 @@
read-only;
};
art: partition@b00000 {
partition@b00000 {
label = "ART";
reg = <0x0b00000 0x0080000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
precal_art_9000: precal@9000 {
reg = <0x5000 0x2f20>;
};
};
partition@b80000 {
@ -356,6 +372,22 @@
label = "ORGDATA";
reg = <0x0c00000 0x0080000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_orgdata_20: macaddr@20 {
reg = <0x20 0x6>;
};
macaddr_orgdata_26: macaddr@26 {
reg = <0x26 0x6>;
};
macaddr_orgdata_2c: macaddr@2c {
reg = <0x2c 0x6>;
};
macaddr_orgdata_32: macaddr@32 {
reg = <0x32 0x6>;
};
};
partition@c80000 {
@ -386,12 +418,16 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_1000>, <&macaddr_orgdata_26>;
qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP";
ieee80211-freq-limit = <2400000 2483000>;
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_5000>, <&macaddr_orgdata_2c>;
qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP";
};
@ -403,11 +439,13 @@
};
&gmac0 {
mtd-mac-address = <&orgdata 0x20>;
nvmem-cells = <&macaddr_orgdata_20>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
mtd-mac-address = <&orgdata 0x20>;
nvmem-cells = <&macaddr_orgdata_20>;
nvmem-cell-names = "mac-address";
};
&usb3_ss_phy {

64
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wr142ac.dts → target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts
View File

@ -1,22 +1,27 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-wr142ac.dtsi"
/dts-v1/;
#include "qcom-ipq4019-x1pro.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Century WR142AC";
compatible = "century,wr142ac";
model = "Telco X1 Pro";
compatible = "tel,x1pro","qcom,ipq4019";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
broken-flash-reset;
partitions {
compatible = "fixed-partitions";
@ -24,53 +29,56 @@
#size-cells = <1>;
partition@0 {
label = "SBL1";
label = "0:SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "MIBIB";
label = "0:MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "QSEE";
label = "0:QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "CDT";
label = "0:CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
label = "0:DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV";
label = "0:APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "APPSBL";
label = "0:APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@170000 {
label = "ART";
art: partition@170000 {
label = "0:ART";
reg = <0x170000 0x10000>;
read-only;
};
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@180000 {
compatible = "denx,fit";
label = "firmware";
@ -79,3 +87,17 @@
};
};
};
&gmac0 {
status = "okay";
mtd-mac-address = <&art 0x5006>;
mtd-mac-address-increment = <2>;
};
&gmac1 {
status = "okay";
mtd-mac-address = <&art 0x5006>;
mtd-mac-address-increment = <3>;
};

95
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wr142ac.dtsi → target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi
View File

@ -6,14 +6,18 @@
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
compatible = "tel,x1pro","qcom,ipq4019";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
serial0 = &blsp1_uart1;
serial1 = &blsp1_uart2;
};
soc {
rng@22000 {
status = "okay";
};
@ -22,6 +26,8 @@
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
};
ess-psgmii@98000 {
@ -38,6 +44,7 @@
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
@ -59,7 +66,7 @@
#address-cells = <1>;
#size-cells = <0>;
usb2_port1: port@1 {
port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
@ -73,22 +80,18 @@
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
@ -100,45 +103,26 @@
edma@c080000 {
status = "okay";
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_power: power {
label = "green:power";
gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
led_status: status {
label = "green:status";
gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
};
};
usb {
label = "green:usb";
gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
};
keys {
compatible = "gpio-keys";
wlan2g {
label = "green:wlan2g";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "green:wlan5g";
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
};
@ -159,10 +143,6 @@
status = "okay";
};
&cryptobam {
status = "okay";
};
&qpic_bam {
status = "okay";
};
@ -174,7 +154,6 @@
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
@ -189,7 +168,6 @@
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
pins = "gpio8", "gpio9";
@ -199,14 +177,14 @@
};
spi_0_pins: spi_0_pinmux {
pin {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pin_cs {
pinmux_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
@ -217,9 +195,10 @@
led_pins: led_pinmux {
mux {
pins = "gpio36", "gpio40";
function = "gpio";
bias-pull-down;
pins = "gpio68";
bias-disabled;
output-low;
};
};
};
@ -238,10 +217,12 @@
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "WR142AC";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "WR142AC";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
};

310
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi Normal file
View File

@ -0,0 +1,310 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Device Tree Source for Linksys xx8300 (Dallas)
*
* Copyright (C) 2019 Jeff Kletsky
* Updated 2020 Hans Geiblinger
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
//
// OEM U-Boot provides either
// init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \
// root=ubi0:ubifs rootwait rw
// or the same with ubi.mtd=13,2048
//
/ {
chosen {
bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
dwc3@6000000 {
#address-cells = <1>;
#size-cells = <0>;
usb2_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
regulator-usb-vbus {
compatible = "regulator-fixed";
regulator-name = "USB_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
gpio = <&tlmm 68 GPIO_ACTIVE_LOW>;
};
};
&blsp_dma {
status = "okay";
};
&blsp1_uart1 {
status = "okay";
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
};
&cryptobam {
status = "okay";
};
&nand {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "sbl1";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "mibib";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "qsee";
reg = <0x200000 0x100000>;
read-only;
};
partition@300000 {
label = "cdt";
reg = <0x300000 0x80000>;
read-only;
};
partition@380000 {
label = "appsblenv";
reg = <0x380000 0x80000>;
read-only;
};
partition@400000 {
label = "ART";
reg = <0x400000 0x80000>;
read-only;
};
partition@480000 {
label = "appsbl";
reg = <0x480000 0x200000>;
read-only;
};
partition@680000 {
label = "u_env";
reg = <0x680000 0x80000>;
// writable -- U-Boot environment
};
partition@700000 {
label = "s_env";
reg = <0x700000 0x40000>;
// writable -- Boot counter records
};
partition@740000 {
label = "devinfo";
reg = <0x740000 0x40000>;
read-only;
};
partition@780000 {
label = "kernel";
reg = <0x780000 0x5800000>;
};
partition@a80000 {
label = "rootfs";
reg = <0xa80000 0x5500000>;
};
partition@5f80000 {
label = "alt_kernel";
reg = <0x5f80000 0x5800000>;
};
partition@6280000 {
label = "alt_rootfs";
reg = <0x6280000 0x5500000>;
};
partition@b780000 {
label = "sysdiag";
reg = <0xb780000 0x100000>;
read-only;
};
partition@b880000 {
label = "syscfg";
reg = <0xb880000 0x4680000>;
read-only;
};
};
};
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
reg = <0x00010000 0 0 0 0>;
};
};
};
&qpic_bam {
status = "okay";
};
&tlmm {
serial_0_pins: serial0-pinmux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
nand_pins: nand_pins {
pullups {
pins = "gpio53", "gpio58", "gpio59";
function = "qpic";
bias-pull-up;
};
// gpio61 controls led_usb
pulldowns {
pins = "gpio55", "gpio56", "gpio57",
"gpio60", "gpio62", "gpio63",
"gpio64", "gpio65", "gpio66",
"gpio67", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};

390
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-zte-mf263.dts
View File

@ -1,390 +0,0 @@
/*
* Copyright (c) 2021 Hugo Yuan <hugolxq@gmail.com>
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ZTE MF263";
compatible = "zte,mf263", "qcom,ipq4019";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256MB */
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs-override = "ubi.mtd=rootfs root=/dev/ubiblock0_1 rootfstype=squashfs rootwait clk_ignore_unused";
};
soc {
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
dwc3@6000000 {
#address-cells = <1>;
#size-cells = <0>;
usb2_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
};
serial@78af000 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
serial@78b0000 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
};
i2c@78b7000 { /* BLSP1 QUP2 */
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
};
usb3: usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
leds {
compatible = "gpio-leds";
power: status {
label = "status";
gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
};
other: other {
label = "other";
gpios = <&tlmm 40 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>,
<&tlmm 54 GPIO_ACTIVE_HIGH>;
num-cs = <2>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:SBL1";
reg = < 0x00 0x40000 >;
};
partition@40000 {
label = "0:MIBIB";
reg = < 0x40000 0x20000 >;
};
partition@60000 {
label = "0:QSEE";
reg = < 0x60000 0x60000 >;
};
partition@c0000 {
label = "0:CDT";
reg = < 0xc0000 0x10000 >;
};
partition@d0000 {
label = "0:DDRPARAMS";
reg = < 0xd0000 0x10000 >;
};
partition@e0000 {
label = "0:APPSBLENV";
reg = < 0xe0000 0x10000 >;
};
partition@f0000 {
label = "0:APPSBL";
reg = < 0xf0000 0xc0000 >;
};
partition@1b0000 {
label = "0:reserved1";
reg = < 0x1b0000 0x50000 >;
};
};
};
spi-nand@1 {
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "fota-flag";
reg = < 0x00 0xa0000 >;
};
partition@a0000 {
label = "0:ART";
reg = < 0xa0000 0x80000 >;
};
partition@120000 {
label = "mac";
reg = < 0x120000 0x80000 >;
};
partition@1a0000 {
label = "reserved2";
reg = < 0x1a0000 0xc0000 >;
};
partition@260000 {
label = "cfg-param";
reg = < 0x260000 0x400000 >;
};
partition@660000 {
label = "log";
reg = < 0x660000 0x400000 >;
};
partition@a60000 {
label = "oops";
reg = < 0xa60000 0xa0000 >;
};
partition@b00000 {
label = "reserved3";
reg = < 0xb00000 0x500000 >;
};
partition@1000000 {
label = "web";
reg = < 0x1000000 0x800000 >;
};
partition@1800000 {
label = "rootfs";
reg = < 0x1800000 0x1d00000 >;
};
partition@3500000 {
label = "data";
reg = < 0x3500000 0x1900000 >;
};
partition@4e00000 {
label = "fota";
reg = < 0x4e00000 0x3200000 >;
};
};
};
};
&cryptobam {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&tlmm {
i2c_0_pins: i2c-0-pinmux {
mux {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_0_pins: serial0-pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
serial_1_pins: serial1_pinmux {
mux {
pins = "gpio8", "gpio9";
function = "blsp_uart1";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "zte_mf263";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "zte_mf263";
};

40
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
View File

@ -162,7 +162,6 @@
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio54";
@ -198,49 +197,52 @@
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "0:MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "0:QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "0:CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "0:DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "0:APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition5@f0000 {
label = "0:APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition5@170000 {
label = "0:ART";
reg = <0x00170000 0x00010000>;
read-only;
};
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition6@180000 {
compatible = "denx,fit";
label = "firmware";
@ -260,6 +262,22 @@
status = "okay";
};
&gmac0 {
qcom,phy_mdio_addr = <4>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <2 0x20>;
};
&gmac1 {
qcom,phy_mdio_addr = <3>;
qcom,poll_required = <1>;
qcom,forced_speed = <1000>;
qcom,forced_duplex = <1>;
vlan_tag = <1 0x10>;
};
&usb3_ss_phy {
status = "okay";
};
@ -274,8 +292,12 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
};

20
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts
View File

@ -118,6 +118,17 @@
label = "ART";
reg = <0xe0000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@f0000 {
@ -130,6 +141,13 @@
label = "mfginfo";
reg = <0x1e0000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_mfginfo_1d: macaddr@1d {
reg = <0x1d 0x6>;
};
};
partition@1f0000 {
@ -145,10 +163,8 @@
};
partition@380000 {
/* This is empty */
label = "appsblenv";
reg = <0x380000 0x10000>;
read-only;
};
partition@390000 {

27
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts
View File

@ -198,7 +198,6 @@
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
@ -213,7 +212,6 @@
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio12", "gpio59";
@ -327,6 +325,17 @@
label = "ART";
reg = <0x1f0000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@1f0000 {
@ -351,6 +360,13 @@
label = "mfginfo";
reg = <0x390000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_mfginfo_1d: macaddr@1d {
reg = <0x1d 0x6>;
};
};
partition@3a0000 {
@ -415,9 +431,16 @@
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "Aruba-AP-303";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_1000>, <&macaddr_mfginfo_1d>;
qcom,ath10k-calibration-variant = "Aruba-AP-303";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "Aruba-AP-303";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_5000>, <&macaddr_mfginfo_1d>;
mac-address-increment = <1>;
qcom,ath10k-calibration-variant = "Aruba-AP-303";
};

28
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
View File

@ -138,7 +138,6 @@
partition@e0000 {
label = "u-boot-env";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
@ -151,6 +150,17 @@
label = "ART";
reg = <0x1f0000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
partition@200000 {
@ -175,6 +185,13 @@
label = "mfginfo";
reg = <0x390000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_mfginfo_1d: macaddr@1d {
reg = <0x1d 0x6>;
};
};
partition@3a0000 {
@ -191,3 +208,12 @@
};
};
};
&wifi0 {
qcom,ath10k-calibration-variant = "Aruba-AP-365";
};
&wifi1 {
qcom,ath10k-calibration-variant = "Aruba-AP-365";
};

7
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
View File

@ -140,7 +140,6 @@
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
@ -173,7 +172,6 @@
drive-strength = <12>;
bias-disable;
};
pin_cs {
function = "gpio";
pins = "gpio12";
@ -244,10 +242,15 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_1000>, <&macaddr_mfginfo_1d>;
qcom,ath10k-calibration-variant = "Aruba-AP-303";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration", "mac-address";
nvmem-cells = <&precal_art_5000>, <&macaddr_mfginfo_1d>;
mac-address-increment = <1>;
qcom,ath10k-calibration-variant = "Aruba-AP-303";
};

18
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
View File

@ -208,6 +208,17 @@
label = "ART";
reg = <0x170000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
firmware@180000 {
@ -239,18 +250,15 @@
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
};
pinmux_cs {
function = "gpio";
pins = "gpio54";
};
pinconf {
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio54";
drive-strength = <2>;
@ -274,10 +282,14 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "GL-B1300";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "GL-B1300";
};

24
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts
View File

@ -207,6 +207,17 @@
label = "ART";
reg = <0x170000 0x10000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
precal_art_1000: precal@1000 {
reg = <0x1000 0x2f20>;
};
precal_art_5000: precal@5000 {
reg = <0x5000 0x2f20>;
};
};
firmware@180000 {
@ -224,7 +235,7 @@
status = "okay";
spidev1: spi@0 {
compatible = "silabs,si3210";
compatible = "siliconlabs,si3210";
reg = <0>;
spi-max-frequency = <24000000>;
};
@ -265,18 +276,15 @@
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
};
pinconf {
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio12";
drive-strength = <2>;
@ -291,25 +299,21 @@
function = "blsp_spi1";
bias-disable;
};
host_int {
pins = "gpio42";
function = "gpio";
input;
};
cs {
pins = "gpio45";
function = "gpio";
bias-pull-up;
};
wake {
pins = "gpio40";
function = "gpio";
output-high;
};
reset {
pins = "gpio49";
function = "gpio";
@ -354,10 +358,14 @@
&wifi0 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_1000>;
qcom,ath10k-calibration-variant = "GL-S1300";
};
&wifi1 {
status = "okay";
nvmem-cell-names = "pre-calibration";
nvmem-cells = <&precal_art_5000>;
qcom,ath10k-calibration-variant = "GL-S1300";
};

34
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
View File

@ -16,6 +16,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Meraki MR33 Access Point";
@ -148,7 +149,6 @@
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
at24@50 {
compatible = "atmel,24c64";
pagesize = <32>;
@ -167,30 +167,40 @@
reg = <0x30>;
clock-mode = /bits/8 <2>;
enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* RGB led */
status_red: chan0 {
status_red: chan@0 {
chan-name = "red:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <0>;
color = <LED_COLOR_ID_RED>;
};
status_green: chan1 {
status_green: chan@1 {
chan-name = "green:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <1>;
color = <LED_COLOR_ID_GREEN>;
};
chan2 {
chan@2 {
chan-name = "blue:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <2>;
color = <LED_COLOR_ID_BLUE>;
};
chan3 {
chan@3 {
chan-name = "white:status";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
reg = <3>;
color = <LED_COLOR_ID_WHITE>;
};
};
};
@ -211,67 +221,56 @@
reg = <0x00000000 0x00100000>;
read-only;
};
partition@100000 {
label = "mibib";
reg = <0x00100000 0x00100000>;
read-only;
};
partition@200000 {
label = "bootconfig";
reg = <0x00200000 0x00100000>;
read-only;
};
partition@300000 {
label = "qsee";
reg = <0x00300000 0x00100000>;
read-only;
};
partition@400000 {
label = "qsee_alt";
reg = <0x00400000 0x00100000>;
read-only;
};
partition@500000 {
label = "cdt";
reg = <0x00500000 0x00080000>;
read-only;
};
partition@580000 {
label = "cdt_alt";
reg = <0x00580000 0x00080000>;
read-only;
};
partition@600000 {
label = "ddrparams";
reg = <0x00600000 0x00080000>;
read-only;
};
partition@700000 {
label = "u-boot";
reg = <0x00700000 0x00200000>;
read-only;
};
partition@900000 {
label = "u-boot-backup";
reg = <0x00900000 0x00200000>;
read-only;
};
partition@b00000 {
label = "ART";
reg = <0x00b00000 0x00080000>;
read-only;
};
partition@c00000 {
label = "ubi";
reg = <0x00c00000 0x07000000>;
@ -323,7 +322,6 @@
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
@ -353,7 +351,6 @@
function = "blsp_i2c0";
pins = "gpio20", "gpio21";
};
pinconf {
pins = "gpio20", "gpio21";
drive-strength = <16>;
@ -366,7 +363,6 @@
function = "blsp_i2c1";
pins = "gpio34", "gpio35";
};
pinconf {
pins = "gpio34", "gpio35";
drive-strength = <16>;

Some files were not shown because too many files have changed in this diff Show More