From 3cde517a11bc2a0b1b4db9ef2e1ab2e91e9bd046 Mon Sep 17 00:00:00 2001 From: haxc Date: Mon, 24 Feb 2020 21:31:36 +0800 Subject: [PATCH] ath79: add support for TP-Link TL-WR882N/WR885N/WR886N (#3307) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * ath79: add support for TP-Link TL-WR882N/WR885N/WR886N This adds support for the various clones of the TL-WR885N recently supported ("ath79: add support for TP-Link TL-WR885N v1"): - tplink,tl-wr882n-v1 - tplink,tl-wr882n-v2 - tplink,tl-wr882n-v3 - tplink,tl-wr885n-v1 - tplink,tl-wr885n-v2 - tplink,tl-wr886n-v2 - tplink,tl-wr886n-v3 - tplink,tl-wr886n-v4 - tplink,tl-wr886n-v5 - tplink,tl-wr886n-v6 - tplink,tl-wr886n-v7 These devices are cloned in ar71xx. All models added in this patch are the same hardware CPU WR885n V2 was tested. Specifications: - SOC: Qualcomm Atheros TP9343-AL3A - CPU: 750MHz - Flash: 2 MiB (AH1446 25Q16BS1G E5N102) - RAM: 16 MiB (Zentel A3S28D40JTP-50) - WLAN: Qualcomm Atheros TP9343 450Mbps - Ethernet: Atheros AR8228/AR8229 4 port (100M) 添加TP9343芯片的路由器型号支持，TL-WR882N/WR885N/WR886N系列 * ath79: add support for MerCury MW4530R v1 重新添加水星MW4530R路由器支持 --- .../ar71xx/base-files/etc/board.d/01_leds | 13 ++ .../ar71xx/base-files/etc/board.d/02_network | 10 + target/linux/ar71xx/base-files/etc/diag.sh | 4 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 11 +- .../ar71xx/base-files/lib/upgrade/platform.sh | 2 + target/linux/ar71xx/config-4.9 | 12 + .../files/arch/mips/ath79/mach-mc-mw4530r.c | 212 ++++++++++++++++++ .../files/arch/mips/ath79/mach-tl-wr885n-v1.c | 128 +++++++++++ target/linux/ar71xx/image/generic.mk | 10 + target/linux/ar71xx/image/tiny-tp-link.mk | 57 +++++ .../patches-4.9/960-mw4530r-support.patch | 42 ++++ .../961-wr885n-tp9343-support.patch | 40 ++++ target/linux/ar71xx/tiny/config-default | 1 + 13 files changed, 541 insertions(+), 1 deletion(-) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mw4530r.c create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr885n-v1.c create mode 100644 target/linux/ar71xx/patches-4.9/960-mw4530r-support.patch create mode 100644 target/linux/ar71xx/patches-4.9/961-wr885n-tp9343-support.patch diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 9a517d4f6..09c772d77 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -469,6 +469,12 @@ mc-mac1200r) ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g" "phy0tpt" ;; +mc-mw4530r) + ucidef_set_led_power "power" "POWER" "mercury:green:power" "1" + ucidef_set_led_usbdev "usb" "USB" "mercury:green:usb" "1-1" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g" "phy1tpt" + ;; mr12|\ mr16) ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" @@ -896,6 +902,13 @@ tl-wdr4900-v2) ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy1tpt" ;; +tl-wr885n-v1) + ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0" + ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" + ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" + ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" + ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" + ;; tl-wdr6500-v2|\ tl-wdr6500-v6|\ tl-wr741nd) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index b83f79333..483075d06 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -373,6 +373,11 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" ;; + tl-wr885n-v1) + ucidef_set_interfaces_lan_wan "eth1.1" "eth0" + ucidef_add_switch "switch0" \ + "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" + ;; tl-mr6400) ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0" ucidef_add_switch "switch0" \ @@ -620,6 +625,11 @@ ar71xx_setup_macs() fritz300e) lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) ;; + mc-mw4530r|\ + tl-wdr4300) + base_mac=$(mtd_get_mac_binary u-boot 0x1fc00) + wan_mac=$(macaddr_add "$base_mac" 1) + ;; tl-wr1043n-v5|\ tl-wr1043nd-v4) lan_mac=$(mtd_get_mac_binary product-info 8) diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index e545751bb..1fe5b013c 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -286,6 +286,9 @@ get_status_led() { mc-mac1200r) status_led="mercury:green:system" ;; + mc-mw4530r) + status_led="mercury:green:system" + ;; mr18|\ z1) status_led="$board:green:tricolor0" @@ -490,6 +493,7 @@ get_status_led() { tl-wr842n-v3|\ tl-wr880n-v1|\ tl-wr881n-v1|\ + tl-wr885n-v1|\ tl-wr941nd|\ tl-wr941n-v7|\ tl-wr941nd-v5) diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 3e507e3be..2eb9001d9 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -270,6 +270,9 @@ tplink_board_detect() { "094000"*) model="TP-Link TL-WR940N" ;; + "088500"*) + model="TP-Link TL-WR885N" + ;; "094100"*) model="TP-Link TL-WR941N/ND" @@ -325,7 +328,7 @@ tplink_board_detect() { model="ANTROUTER-R1" ;; "453000"*) - model="Mercury MW4530R" + model="MerCury MW4530R" ;; "49000002") model="TP-Link TL-WDR4900" @@ -840,6 +843,9 @@ ar71xx_board_detect() { *"MAC1200R") name="mc-mac1200r" ;; + *"MW4530R") + name="mc-mw4530r" + ;; *"MiniBox V1.0") name="minibox-v1" ;; @@ -1385,6 +1391,9 @@ ar71xx_board_detect() { *"TL-WR881N v1") name="tl-wr881n-v1" ;; + *"TL-WR885N v1") + name="tl-wr885n-v1" + ;; *"TL-WR902AC v1") name="tl-wr902ac-v1" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 91ae4e29c..2c5bf4eb9 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -415,6 +415,7 @@ platform_check_image() { gl-inet|\ lan-turtle|\ mc-mac1200r|\ + mc-mw4530r | \ minibox-v1|\ omy-g1|\ omy-x1|\ @@ -493,6 +494,7 @@ platform_check_image() { tl-wr842n-v3|\ tl-wr880n-v1|\ tl-wr881n-v1|\ + tl-wr885n-v1|\ tl-wr902ac-v1|\ tl-wr940n-v4|\ tl-wr940n-v6|\ diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index c7c6cadef..36d1c9867 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -144,6 +144,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_LAN_TURTLE is not set # CONFIG_ATH79_MACH_LIMA is not set # CONFIG_ATH79_MACH_MC_MAC1200R is not set +CONFIG_ATH79_MACH_MC_MW4530R=y # CONFIG_ATH79_MACH_MR12 is not set # CONFIG_ATH79_MACH_MR16 is not set # CONFIG_ATH79_MACH_MR1750 is not set @@ -240,6 +241,17 @@ CONFIG_ATH79_MACH_TL_WDR6500_V6=y # CONFIG_ATH79_MACH_TL_WR841N_V1 is not set # CONFIG_ATH79_MACH_TL_WR841N_V8 is not set # CONFIG_ATH79_MACH_TL_WR841N_V9 is not set +# CONFIG_ATH79_MACH_TL_WR882N_V1 is not set +# CONFIG_ATH79_MACH_TL_WR882N_V2 is not set +# CONFIG_ATH79_MACH_TL_WR882N_V3 is not set +# CONFIG_ATH79_MACH_TL_WR885N_V1 is not set +# CONFIG_ATH79_MACH_TL_WR885N_V2 is not set +# CONFIG_ATH79_MACH_TL_WR886N_V2 is not set +# CONFIG_ATH79_MACH_TL_WR886N_V3 is not set +# CONFIG_ATH79_MACH_TL_WR886N_V4 is not set +# CONFIG_ATH79_MACH_TL_WR886N_V5 is not set +# CONFIG_ATH79_MACH_TL_WR886N_V6 is not set +# CONFIG_ATH79_MACH_TL_WR886N_V7 is not set # CONFIG_ATH79_MACH_TL_WR902AC_V1 is not set # CONFIG_ATH79_MACH_TL_WR940N_V4 is not set # CONFIG_ATH79_MACH_TL_WR941ND is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mw4530r.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mw4530r.c new file mode 100644 index 000000000..bf99a2017 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mw4530r.c @@ -0,0 +1,212 @@ +/* + * MerCury MW4530R board support + * + * Copyright (C) 2012 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + + + +#define MW4530R_AR9580_LED_WLAN5G 0 + +#define MW4530R_GPIO_LED_USB 11 +#define MW4530R_GPIO_LED_WLAN2G 13 +#define MW4530R_GPIO_LED_SYSTEM 14 +#define MW4530R_GPIO_LED_QSS 15 + +#define MW4530R_GPIO_BTN_WPS 16 +#define MW4530R_GPIO_BTN_RESET 17 + +#define MW4530R_GPIO_EXTERNAL_LNA0 18 +#define MW4530R_GPIO_EXTERNAL_LNA1 19 + +#define MW4530R_GPIO_USB_POWER 22 + +#define MW4530R_KEYS_POLL_INTERVAL 20 /* msecs */ +#define MW4530R_KEYS_DEBOUNCE_INTERVAL (3 * MW4530R_KEYS_POLL_INTERVAL) + +#define MW4530R_MAC0_OFFSET 0 +#define MW4530R_MAC1_OFFSET 6 +#define MW4530R_WMAC_CALDATA_OFFSET 0x1000 +#define MW4530R_PCIE_CALDATA_OFFSET 0x5000 + +static const char *mw4530r_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data mw4530r_flash_data = { + .part_probes = mw4530r_part_probes, +}; + +static struct gpio_led mw4530r_leds_gpio[] __initdata = { + { + .name = "mercury:green:qss", + .gpio = MW4530R_GPIO_LED_QSS, + .active_low = 1, + }, + { + .name = "mercury:green:system", + .gpio = MW4530R_GPIO_LED_SYSTEM, + .active_low = 1, + }, + { + .name = "mercury:green:usb", + .gpio = MW4530R_GPIO_LED_USB, + .active_low = 1, + }, + { + .name = "mercury:green:wlan2g", + .gpio = MW4530R_GPIO_LED_WLAN2G, + .active_low = 1, + }, +}; + +static struct gpio_led ar9580_leds_gpio[] = { + { + .name = "mercury:green:wlan5g", + .gpio = MW4530R_AR9580_LED_WLAN5G, + .active_low = 1, + }, +}; + + +static struct gpio_keys_button mw4530r_gpio_keys[] __initdata = { + { + .desc = "QSS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = MW4530R_KEYS_DEBOUNCE_INTERVAL, + .gpio = MW4530R_GPIO_BTN_WPS, + .active_low = 1, + }, + { + .desc = "RESET button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = MW4530R_KEYS_DEBOUNCE_INTERVAL, + .gpio = MW4530R_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static const struct ar8327_led_info mw4530r_leds_ar8327[] __initconst = { + AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:wan"), + AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan1"), + AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"), + AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan3"), + AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:lan4"), +}; +static struct ar8327_pad_cfg mw4530r_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_led_cfg mw4530r_ar8327_led_cfg = { + .led_ctrl0 = 0xc737c737, + .led_ctrl1 = 0x00000000, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x0030c300, + .open_drain = false, +}; + +static struct ar8327_platform_data mw4530r_ar8327_data = { + .pad0_cfg = &mw4530r_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &mw4530r_ar8327_led_cfg, + .num_leds = ARRAY_SIZE(mw4530r_leds_ar8327), + .leds = mw4530r_leds_ar8327, +}; + +static struct mdio_board_info mw4530r_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &mw4530r_ar8327_data, + }, +}; + +static void __init mw4530r_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 tmpmac[ETH_ALEN]; + + ath79_register_m25p80(&mw4530r_flash_data); + ath79_register_leds_gpio(-1, ARRAY_SIZE(mw4530r_leds_gpio), + mw4530r_leds_gpio); + ath79_register_gpio_keys_polled(-1, MW4530R_KEYS_POLL_INTERVAL, + ARRAY_SIZE(mw4530r_gpio_keys), + mw4530r_gpio_keys); + + ath79_wmac_set_ext_lna_gpio(0, MW4530R_GPIO_EXTERNAL_LNA0); + ath79_wmac_set_ext_lna_gpio(1, MW4530R_GPIO_EXTERNAL_LNA1); + + ath79_init_mac(tmpmac, mac, -1); + + ath79_register_wmac(art + MW4530R_WMAC_CALDATA_OFFSET, tmpmac); + + ath79_init_mac(tmpmac, mac, 0); + + ap91_pci_init(art + MW4530R_PCIE_CALDATA_OFFSET, tmpmac); + + ap9x_pci_setup_wmac_leds(0, ar9580_leds_gpio, + ARRAY_SIZE(ar9580_leds_gpio)); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + + mdiobus_register_board_info(mw4530r_mdio0_info, + ARRAY_SIZE(mw4530r_mdio0_info)); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + + /* GMAC0 is connected to an AR8327N switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); + + gpio_request_one(MW4530R_GPIO_USB_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB power"); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_MC_MW4530R, "MC-MW4530R", + "MerCury MW4530R", + mw4530r_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr885n-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr885n-v1.c new file mode 100644 index 000000000..8f93912b7 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr885n-v1.c @@ -0,0 +1,128 @@ +/* + * TP-LINK TL-WR885N TP9343 board support + * + * Copyright (C) 2020 haxc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + + +#define TL_WR885N_V1_GPIO_LED_WAN 2 +#define TL_WR885N_V1_GPIO_LED_LAN1 4 +#define TL_WR885N_V1_GPIO_LED_LAN2 5 +#define TL_WR885N_V1_GPIO_LED_LAN3 6 +#define TL_WR885N_V1_GPIO_LED_LAN4 7 +#define TL_WR885N_V1_GPIO_LED_SYSTEM 8 + +#define TL_WR885N_V1_GPIO_BTN_RESET 1 + +#define TL_WR885N_KEYS_POLL_INTERVAL 20 +#define TL_WR885N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR885N_KEYS_POLL_INTERVAL) + + +static struct gpio_led tl_wr885n_v1_leds_gpio[] __initdata = { + + { + .name = "tp-link:green:wan", + .gpio = TL_WR885N_V1_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "tp-link:green:lan1", + .gpio = TL_WR885N_V1_GPIO_LED_LAN1, + .active_low = 1, + }, + { + .name = "tp-link:green:lan2", + .gpio = TL_WR885N_V1_GPIO_LED_LAN2, + .active_low = 1, + }, + { + .name = "tp-link:green:lan3", + .gpio = TL_WR885N_V1_GPIO_LED_LAN3, + .active_low = 1, + }, + { + .name = "tp-link:green:lan4", + .gpio = TL_WR885N_V1_GPIO_LED_LAN4, + .active_low = 1, + }, + { + .name = "tp-link:green:system", + .gpio = TL_WR885N_V1_GPIO_LED_SYSTEM, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_wr885n_v1_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR885N_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR885N_V1_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static const char *tl_wr885n_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr885n_flash_data = { + .part_probes = tl_wr885n_part_probes, +}; + + +static void __init tl_wr885n_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(&tl_wr885n_flash_data); + + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); + + ath79_switch_data.phy4_mii_en = 1; + + ath79_register_eth(0); + ath79_register_eth(1); + + ath79_register_wmac(ee, mac); + +} + +static void __init tl_wr885n_v1_setup(void) +{ + tl_wr885n_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr885n_v1_leds_gpio), + tl_wr885n_v1_leds_gpio); + + ath79_register_gpio_keys_polled(-1, TL_WR885N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr885n_v1_gpio_keys), + tl_wr885n_v1_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR885N_V1, "TL-WR885N-v1", "TP-LINK TL-WR885N v1", + tl_wr885n_v1_setup); diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index bc59dedee..f56bf3196 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -888,6 +888,16 @@ define Device/mc-mac1200r endef TARGET_DEVICES += mc-mac1200r +define Device/mc-mw4530r +$(Device/tplink-16mlzma) + DEVICE_TITLE := MerCury MW4530R + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport + BOARDNAME := MC-MW4530R + DEVICE_PROFILE := MW4530R + TPLINK_HWID := 0x45300001 +endef +TARGET_DEVICES += mc-mw4530r + define Device/minibox-v1 $(Device/tplink-16mlzma) DEVICE_TITLE := GainStrong MiniBox V1.0 diff --git a/target/linux/ar71xx/image/tiny-tp-link.mk b/target/linux/ar71xx/image/tiny-tp-link.mk index 3ad067b4d..340a2a7ec 100644 --- a/target/linux/ar71xx/image/tiny-tp-link.mk +++ b/target/linux/ar71xx/image/tiny-tp-link.mk @@ -641,6 +641,63 @@ define Device/tl-wr881n-v1 endef TARGET_DEVICES += tl-wr881n-v1 +define Device/tl-wr882n-v1 + $(Device/tl-wr885n-v1) + DEVICE_TITLE := TP-LINK TL-WR882N v1 +endef +TARGET_DEVICES += tl-wr882n-v1 + +define Device/tl-wr882n-v2 + $(Device/tl-wr885n-v1) + DEVICE_TITLE := TP-LINK TL-WR882N v2 +endef +TARGET_DEVICES += tl-wr882n-v2 + +define Device/tl-wr882n-v3 + $(Device/tl-wr885n-v1) + DEVICE_TITLE := TP-LINK TL-WR882N v3 +endef +TARGET_DEVICES += tl-wr882n-v3 + +define Device/tl-wr885n-v1 + $(Device/tplink-8mlzma) + DEVICE_TITLE := TP-LINK TL-WR885N v1 + BOARDNAME := TL-WR885N-v1 + DEVICE_PROFILE := TLWR885 + TPLINK_HWID := 0x08850001 +endef +TARGET_DEVICES += tl-wr885n-v1 + +define Device/tl-wr885n-v2 + $(Device/tl-wr885n-v1) + DEVICE_TITLE := TP-LINK TL-WR885N v2 +endef +TARGET_DEVICES += tl-wr885n-v2 + +define Device/tl-wr886n-v2 + $(Device/tl-wr885n-v1) + DEVICE_TITLE := TP-LINK TL-WR886N v2 +endef +TARGET_DEVICES += tl-wr886n-v2 + +define Device/tl-wr886n-v3 + $(Device/tl-wr885n-v1) + DEVICE_TITLE := TP-LINK TL-WR886N v3 +endef +TARGET_DEVICES += tl-wr886n-v3 + +define Device/tl-wr886n-v5 + $(Device/tl-wr885n-v1) + DEVICE_TITLE := TP-LINK TL-WR886N v5 +endef +TARGET_DEVICES += tl-wr886n-v5 + +define Device/tl-wr886n-v7 + $(Device/tl-wr885n-v1) + DEVICE_TITLE := TP-LINK TL-WR886N v7 +endef +TARGET_DEVICES += tl-wr886n-v7 + define Device/tl-wr940n-v4 $(Device/tplink-8mlzma) DEVICE_TITLE := TP-LINK TL-WR940N v4 diff --git a/target/linux/ar71xx/patches-4.9/960-mw4530r-support.patch b/target/linux/ar71xx/patches-4.9/960-mw4530r-support.patch new file mode 100644 index 000000000..581dc8c4b --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/960-mw4530r-support.patch @@ -0,0 +1,42 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -154,6 +154,7 @@ + ATH79_MACH_LAN_TURTLE, /* Hak5 LAN Turtle */ + ATH79_MACH_LIMA, /* 8devices Lima */ + ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R */ ++ ATH79_MACH_MC_MW4530R, /* MerCury MW4530R */ + ATH79_MACH_MR12, /* Cisco Meraki MR12 */ + ATH79_MACH_MR16, /* Cisco Meraki MR16 */ + ATH79_MACH_MR1750, /* OpenMesh MR1750 */ +=================================================================== +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -154,6 +154,7 @@ + obj-$(CONFIG_ATH79_MACH_LAN_TURTLE) += mach-lan-turtle.o + obj-$(CONFIG_ATH79_MACH_LIMA) += mach-lima.o + obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o ++obj-$(CONFIG_ATH79_MACH_MC_MW4530R) += mach-mc-mw4530r.o + obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o + obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o + obj-$(CONFIG_ATH79_MACH_MR1750) += mach-mr1750.o +=================================================================== +--- a/arch/mips/ath79/Kconfig.openwrt ++++ b/arch/mips/ath79/Kconfig.openwrt +@@ -1126,6 +1126,17 @@ + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + ++config ATH79_MACH_MC_MW4530R ++ bool "MerCury MW4530R board support" ++ select SOC_AR934X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_RB4XX + bool "MikroTik RouterBOARD 4xx series support" + select SOC_AR71XX diff --git a/target/linux/ar71xx/patches-4.9/961-wr885n-tp9343-support.patch b/target/linux/ar71xx/patches-4.9/961-wr885n-tp9343-support.patch new file mode 100644 index 000000000..01fc0cfd8 --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/961-wr885n-tp9343-support.patch @@ -0,0 +1,40 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -312,6 +312,7 @@ + ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */ + ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */ + ATH79_MACH_TL_WR842N_V3, /* TP-LINK TL-WR842N/ND v3 */ ++ ATH79_MACH_TL_WR885N_V1, /* TP-LINK TL-WR885N/ND v1 */ + ATH79_MACH_TL_WR902AC_V1, /* TP-LINK TL-WR902AC v1 */ + ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ + ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */ +=================================================================== +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -251,6 +251,7 @@ + obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o + obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o + obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o ++obj-$(CONFIG_ATH79_MACH_TL_WR885N_V1) += mach-tl-wr885n-v1.o + obj-$(CONFIG_ATH79_MACH_TL_WR902AC_V1) += mach-tl-wr902ac-v1.o + obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o + obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o +=================================================================== +--- a/arch/mips/ath79/Kconfig.openwrt ++++ b/arch/mips/ath79/Kconfig.openwrt +@@ -2019,6 +2019,15 @@ + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_TL_WR885N_V1 ++ bool "TP-LINK TL-WR882N / TL-WR885N / TL-WR886N support" ++ select SOC_QCA956X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_TL_WR902AC_V1 + bool "TP-LINK TL-WR902AC v1 support" + select SOC_QCA953X \ No newline at end of file diff --git a/target/linux/ar71xx/tiny/config-default b/target/linux/ar71xx/tiny/config-default index 56a2ae438..d2ddeb39b 100644 --- a/target/linux/ar71xx/tiny/config-default +++ b/target/linux/ar71xx/tiny/config-default @@ -47,6 +47,7 @@ CONFIG_ATH79_MACH_TL_WR841N_V8=y CONFIG_ATH79_MACH_TL_WR841N_V9=y CONFIG_ATH79_MACH_TL_WR880N_V1=y CONFIG_ATH79_MACH_TL_WR881N_V1=y +CONFIG_ATH79_MACH_TL_WR885N_V1=y CONFIG_ATH79_MACH_TL_WR940N_V4=y CONFIG_ATH79_MACH_TL_WR941ND=y CONFIG_ATH79_MACH_TL_WR941ND_V6=y