diff --git a/target/linux/meson/files/arch/arm/boot/dts/meson8b-onecloud.dts b/target/linux/meson/files/arch/arm/boot/dts/meson8b-onecloud.dts new file mode 100644 index 000000000..45cde3543 --- /dev/null +++ b/target/linux/meson/files/arch/arm/boot/dts/meson8b-onecloud.dts @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT + +/dts-v1/; +#include "meson8b.dtsi" +#include +#include + +/ { + model = "Thunder OneCloud"; + compatible = "thunder,onecloud", "amlogic,meson8b"; + + aliases { + serial0 = &uart_AO; + mmc0 = &sd_card_slot; + mmc1 = &sdhc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: status-red { + label = "red:status"; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + }; + + led_status_green: status-green { + label = "green:status"; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + + led_status_blue: status-blue { + label = "blue:status"; + gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; + }; + }; + + p12v0: regulator-p12v0 { + compatible = "regulator-fixed"; + + regulator-name = "P12V0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + + regulator-always-on; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&p12v0>; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + + regulator-always-on; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&p12v0>; + }; + + vcc_5v0: regulator-vcc5v0 { + compatible = "regulator-fixed"; + + regulator-always-on; + regulator-name = "VCC5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&p12v0>; + }; + + vcck: regulator-vcck { + compatible = "pwm-regulator"; + + regulator-always-on; + regulator-boot-on; + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + pwm-supply = <&p12v0>; + + pwms = <&pwm_cd 1 12001 0>; + pwm-dutycycle-range = <10 0>; + }; + + vddc_ddr: regulator-vddc-ddr { + compatible = "regulator-fixed"; + + regulator-always-on; + regulator-name = "DDR_VDDC"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&p12v0>; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy>; + phy-mode = "rgmii-id"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@0 { + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&gpio { + gpio-line-names = + /* Bank GPIODV */ + "VCCK_PWM (PWM_C)", "I2CA_SDA", "I2CA_SCL", + "I2CB_SDA", "I2CB_SCL", "VDDEE_PWM (PWM_D)", + "", + /* Bank GPIOH */ + "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL", + "ETH_PHY_INTR", "ETH_PHY_NRST", "ETH_TXD1", + "ETH_TXD0", "ETH_TXD3", "ETH_TXD2", + "ETH_RGMII_TX_CLK", + /* Bank CARD */ + "SD_D1", "SD_D0", "SD_CLK", "SD_CMD", + "SD_D3", "SD_D2", "SD_CD", + /* Bank BOOT */ + "EMMC_D0", "EMMC_D1", "EMMC_D2", "EMMC_D3", + "EMMC_D4", "EMMC_D5", "EMMC_D6", "EMMC_D7", + "EMMC_CLK", "EMMC_RSTn", "EMMC_CMD", + "BOOT_SEL", "", "", "", "", "", "", "", + /* Bank DIF */ + "ETH_RXD1", "ETH_RXD0", "ETH_RX_DV", + "RGMII_RX_CLK", "ETH_RXD3", "ETH_RXD2", + "ETH_TXEN", "ETH_PHY_REF_CLK_25MOUT", + "ETH_MDC", "ETH_MDIO"; +}; + +&gpio_ao { + gpio-line-names = "UART TX", "UART RX", + "RED_LED", "GREEN_LED", + "BLUE_LED", "BUTTON", "", + "IR_IN", "", "", "", + "", "", "", "", ""; +}; + +&ir_receiver { + status = "okay"; + pinctrl-0 = <&ir_recv_pins>; + pinctrl-names = "default"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&sdhc { + status = "okay"; + + pinctrl-0 = <&sdxc_c_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + max-frequency = <100000000>; + + disable-wp; + cap-mmc-highspeed; + mmc-hs200-1_8v; + no-sdio; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; +}; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vcc_3v3>; + }; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; + pinctrl-names = "default"; + clocks = <&xtal>, <&xtal>; + clock-names = "clkin0", "clkin1"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/target/linux/meson/image/Makefile b/target/linux/meson/image/Makefile index f407a176d..0aaf55fa5 100644 --- a/target/linux/meson/image/Makefile +++ b/target/linux/meson/image/Makefile @@ -110,4 +110,13 @@ ifeq ($(SUBTARGET),mesongx) TARGET_DEVICES += khadas-vim1 endif +define Device/thunder-onecloud + DEVICE_DTS := meson8b-onecloud + DEVICE_TITLE := Thunder OneCloud + KERNEL_LOADADDR := 0x00208000 +endef +ifeq ($(SUBTARGET),meson8b) + TARGET_DEVICES += thunder-onecloud +endif + $(eval $(call BuildImage)) diff --git a/target/linux/meson/patches-5.10/901-arm-boot-add-dts-files.patch b/target/linux/meson/patches-5.10/901-arm-boot-add-dts-files.patch new file mode 100644 index 000000000..eaa3c4c5b --- /dev/null +++ b/target/linux/meson/patches-5.10/901-arm-boot-add-dts-files.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -348,6 +348,7 @@ dtb-$(CONFIG_MACH_MESON8) += \ + meson8b-ec100.dtb \ + meson8b-mxq.dtb \ + meson8b-odroidc1.dtb \ ++ meson8b-onecloud.dtb \ + meson8m2-mxiii-plus.dtb + dtb-$(CONFIG_ARCH_MMP) += \ + pxa168-aspenite.dtb \ diff --git a/target/linux/meson/patches-5.10/902-use-system-LED-for-OpenWrt.patch b/target/linux/meson/patches-5.10/902-use-system-LED-for-OpenWrt.patch new file mode 100644 index 000000000..a387fde89 --- /dev/null +++ b/target/linux/meson/patches-5.10/902-use-system-LED-for-OpenWrt.patch @@ -0,0 +1,14 @@ +--- a/arch/arm/boot/dts/meson8b-onecloud.dts ++++ b/arch/arm/boot/dts/meson8b-onecloud.dts +@@ -13,6 +13,11 @@ + serial0 = &uart_AO; + mmc0 = &sd_card_slot; + mmc1 = &sdhc; ++ ++ led-boot = &led_status_red; ++ led-failsafe = &led_status_red; ++ led-running = &led_status_blue; ++ led-upgrade = &led_status_green; + }; + + chosen {