298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-18 17:33:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' of https://github.com/coolsnowwolf/lede

Browse Source
This commit is contained in:
lean 2021-06-20 21:36:29 +08:00
commit 2a5057a7ca
13 changed files with 451 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
include/image-commands.mk
View File

@ -370,6 +370,13 @@ define Build/qemu-image
fi
endef
define Build/qsdk-ipq-factory-mmc
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its kernel $(IMAGE_KERNEL) rootfs $(IMAGE_ROOTFS)
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/qsdk-ipq-factory-nand
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh \
$@.its ubi $@

4
target/linux/ipq806x/Makefile
View File

@ -21,7 +21,7 @@ DEFAULT_PACKAGES += \
kmod-ata-ahci kmod-ata-ahci-platform \
kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
kmod-phy-qcom-ipq806x-usb kmod-usb3 kmod-usb-dwc3-qcom \
kmod-ath10k-ct wpad-basic-wolfssl \
uboot-envtools
kmod-ath10k-ct wpad-openssl uboot-envtools \
autocore-arm automount autosamba e2fsprogs htop
$(eval $(call BuildTarget))

7
target/linux/ipq806x/base-files/etc/board.d/02_network
View File

@ -71,6 +71,13 @@ qcom,ipq8064-db149)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
;;
ruijie,rg-mtfi-m520)
hw_mac_addr=$(mtd_get_mac_ascii PRODUCTINFO ethaddr)
ucidef_add_switch "switch0" \
"1:lan" "6@eth1" "5:wan" "0@eth0"
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 1)"
;;
tplink,ad7200)
ucidef_add_switch "switch0" \
"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"

24
target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -7,9 +7,27 @@
board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:01:00.0.bin")
case "$board" in
ruijie,rg-mtfi-m520)
caldata_extract "ART" 0x1000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii PRODUCTINFO ethaddr) 2)
;;
esac
;;
"ath10k/cal-pci-0001:01:00.0.bin")
case "$board" in
ruijie,rg-mtfi-m520)
caldata_extract "ART" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii PRODUCTINFO ethaddr) 3)
;;
esac
;;
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case $board in
askey,rt4230w-rev6 |\
askey,rt4230w-rev6)
caldata_extract "0:ART" 0x1000 0x2f20
;;
asrock,g10)
if [ -b "$(find_mtd_part 0:art)" ]; then
caldata_extract "0:art" 0x1000 0x2f20
@ -69,7 +87,9 @@ case "$FIRMWARE" in
;;
"ath10k/pre-cal-pci-0001:01:00.0.bin")
case $board in
askey,rt4230w-rev6 |\
askey,rt4230w-rev6)
caldata_extract "0:ART" 0x5000 0x2f20
;;
asrock,g10)
if [ -b "$(find_mtd_part 0:art)" ]; then
caldata_extract "0:art" 0x5000 0x2f20

5
target/linux/ipq806x/base-files/lib/preinit/05_set_iface_mac_ipq806x.sh
View File

@ -8,6 +8,11 @@ preinit_set_mac_address() {
ip link set dev eth0 address "${lan_mac}"
ip link set dev eth1 address "${wan_mac}"
;;
ruijie,rg-mtfi-m520)
base_mac=$(mtd_get_mac_ascii PRODUCTINFO ethaddr)
ip link set dev eth0 address $(macaddr_add "$base_mac" 1)
ip link set dev eth1 address $(macaddr_add "$base_mac" 2)
;;
esac
}

3
target/linux/ipq806x/base-files/lib/upgrade/platform.sh
View File

@ -44,6 +44,9 @@ platform_do_upgrade() {
linksys,ea8500)
platform_do_upgrade_linksys "$1"
;;
ruijie,rg-mtfi-m520)
ruijie_do_upgrade "$1"
;;
tplink,ad7200 |\
tplink,c2600)
PART_NAME="os-image:rootfs"

54
target/linux/ipq806x/base-files/lib/upgrade/ruijie.sh Normal file
View File

@ -0,0 +1,54 @@
#
# Copyright (C) 2016 lede-project.org
#
ruijie_do_flash() {
local tar_file=$1
local kernel=$2
local rootfs=$3
# keep sure its unbound
losetup --detach-all || {
echo Failed to detach all loop devices. Skip this try.
reboot -f
}
# use the first found directory in the tar archive
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
echo "flashing kernel to $kernel"
tar xf $tar_file ${board_dir}/kernel -O > $kernel
echo "flashing rootfs to $rootfs"
tar xf $tar_file ${board_dir}/root -O > $rootfs
# Cleanup
losetup -d /dev/loop0 >/dev/null 2>&1
sync
umount -a
reboot -f
}
ruijie_do_upgrade() {
local tar_file="$1"
local board=$(board_name)
local kernel=
local rootfs=
case "$board" in
ruijie,rg-mtfi-m520)
kernel="/dev/mmcblk0p2"
rootfs="/dev/mmcblk0p3"
;;
*)
return 1
;;
esac
ruijie_do_flash $tar_file $kernel $rootfs
nand_do_upgrade "$1"
return 0
}

2
target/linux/ipq806x/config-5.10
View File

@ -174,6 +174,8 @@ CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GRO_CELLS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y

2
target/linux/ipq806x/config-5.4
View File

@ -189,6 +189,8 @@ CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GRO_CELLS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y

326
target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-rg-mtfi-m520.dts Normal file
View File

@ -0,0 +1,326 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq8064-v2.0.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Ruijie RG-MTFi-M520";
compatible = "ruijie,rg-mtfi-m520", "qcom,ipq8064";
memory@0 {
reg = <0x42000000 0x7e000000>;
device_type = "memory";
};
aliases {
mdio-gpio0 = &mdio0;
sdcc1 = &sdcc1;
led-boot = &led_sys;
led-failsafe = &led_sys;
led-running = &led_sys;
led-upgrade = &led_sys;
};
chosen {
bootargs = "root=/dev/mmcblk0p3 rootfstype=squashfs,ext4 rootwait noinitrd";
};
leds {
compatible = "gpio-leds";
led_sys: sys {
label = "green:sys";
gpios = <&gpio_ext 15 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
reset {
label = "reset";
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&qcom_pinmux {
button_pins: button_pins {
mux {
pins = "gpio54";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
mdio0_pins: mdio0_pins {
clk {
pins = "gpio1";
input-disable;
};
};
rgmii2_pins: rgmii2_pins {
tx {
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
input-disable;
};
};
sdcc1_pins: sdcc1_pinmux {
mux {
pins = "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45", "gpio46", "gpio47";
function = "sdc1";
};
cmd {
pins = "gpio45";
drive-strength = <10>;
bias-pull-up;
};
data {
pins = "gpio38", "gpio39", "gpio40", "gpio41",
"gpio43", "gpio44", "gpio46", "gpio47";
drive-strength = <10>;
bias-pull-up;
};
clk {
pins = "gpio42";
drive-strength = <16>;
bias-disable;
};
};
spi_pins: spi_pins {
cs {
pins = "gpio20";
drive-strength = <12>;
};
};
};
&gsbi2 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "okay";
i2c@124a0000 {
status = "okay";
lm75@48 {
compatible = "lm75";
reg = <0x48>;
};
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
gpio_ext: tca9539@74 {
compatible = "ti,tca9539";
reg = <0x74>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
&gsbi5 {
qcom,mode = <GSBI_PROT_SPI>;
status = "okay";
spi4: spi@1a280000 {
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x10000>;
read-only;
};
MIBIB@10000 {
label = "MIBIB";
reg = <0x10000 0x10000>;
read-only;
};
SBL2@20000 {
label = "SBL2";
reg = <0x20000 0x20000>;
read-only;
};
SBL3@40000 {
label = "SBL3";
reg = <0x40000 0x30000>;
read-only;
};
DDRCONFIG@70000 {
label = "DDRCONFIG";
reg = <0x70000 0x10000>;
read-only;
};
PRODUCTINFO@80000 {
label = "PRODUCTINFO";
reg = <0x80000 0x10000>;
read-only;
};
TZ@90000 {
label = "TZ";
reg = <0x90000 0x30000>;
read-only;
};
RPM@c0000 {
label = "RPM";
reg = <0xc0000 0x20000>;
read-only;
};
APPSBL@e0000 {
label = "APPSBL";
reg = <0xe0000 0x80000>;
read-only;
};
APPSBLENV@160000 {
label = "APPSBLENV";
reg = <0x160000 0x10000>;
read-only;
};
BOOTCONFIG@170000 {
label = "BOOTCONFIG";
reg = <0x170000 0x10000>;
read-only;
};
ART@180000 {
label = "ART";
reg = <0x180000 0x40000>;
read-only;
};
};
};
};
&sata_phy {
status = "okay";
};
&sata {
status = "okay";
};
&usb3_0 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&pcie0 {
status = "okay";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
&pcie1 {
status = "okay";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
max-link-speed = <1>;
};
&mdio0 {
status = "okay";
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x00004 0x7600000 /* PAD0_MODE */
0x00008 0x1000000 /* PAD5_MODE */
0x0000c 0x80 /* PAD6_MODE */
0x000e4 0x6a545 /* MAC_POWER_SEL */
0x000e0 0xc74164de /* SGMII_CTRL */
0x0007c 0x4e /* PORT0_STATUS */
0x00094 0x4e /* PORT6_STATUS */
>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
&gmac1 {
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
pinctrl-0 = <&rgmii2_pins>;
pinctrl-names = "default";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gmac2 {
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&amba {
sdcc1: sdcc@12400000 {
status = "okay";
pinctrl-0 = <&sdcc1_pins>;
pinctrl-names = "default";
};
};
&adm_dma {
status = "okay";
};
&CPU_SPC {
status = "disabled";
};

17
target/linux/ipq806x/image/Makefile
View File

@ -344,6 +344,23 @@ define Device/qcom_ipq8064-db149
endef
TARGET_DEVICES += qcom_ipq8064-db149
define Device/ruijie_rg-mtfi-m520
DEVICE_VENDOR := Ruijie
DEVICE_MODEL := RG-MTFi-M520
SOC := qcom-ipq8064
BLOCKSIZE := 64k
KERNEL_SIZE := 4096k
KERNEL_SUFFIX := -uImage
KERNEL = kernel-bin | append-dtb | uImage none | pad-to $$(KERNEL_SIZE)
KERNEL_NAME := zImage
IMAGES += factory.bin
IMAGE/factory.bin := qsdk-ipq-factory-mmc
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct e2fsprogs kmod-hwmon-lm75 \
kmod-fs-ext4 kmod-fs-f2fs kmod-rtc-pcf8563 losetup mkf2fs
endef
TARGET_DEVICES += ruijie_rg-mtfi-m520
define Device/tplink_ad7200
$(call Device/TpSafeImage)
DEVICE_VENDOR := TP-Link

3
target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -907,8 +907,26 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -907,8 +907,27 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk04.1-c3.dtb \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
@ -26,6 +26,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq8064-g10.dtb \
+ qcom-ipq8064-r7500.dtb \
+ qcom-ipq8064-r7500v2.dtb \
+ qcom-ipq8064-rg-mtfi-m520.dtb \
+ qcom-ipq8064-unifi-ac-hd.dtb \
+ qcom-ipq8064-wg2600hp.dtb \
+ qcom-ipq8064-wpq864.dtb \

3
target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -842,7 +842,25 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -842,7 +842,26 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk04.1-c3.dtb \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
@ -25,6 +25,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq8064-g10.dtb \
+ qcom-ipq8064-r7500.dtb \
+ qcom-ipq8064-r7500v2.dtb \
+ qcom-ipq8064-rg-mtfi-m520.dtb \
+ qcom-ipq8064-unifi-ac-hd.dtb \
+ qcom-ipq8064-wg2600hp.dtb \
+ qcom-ipq8064-wpq864.dtb \