rockchip: add h68k/h69k hardware v3 support

target/linux/rockchip/armv8/base-files/etc/board.d/01_leds

@@ -32,10 +32,12 @@ friendlyarm,nanopi-r5s)
 	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth2"
 	;;
 hinlink,opc-h66k|\
-hinlink,opc-h68k|\
 hinlink,opc-h69k)
 	ucidef_set_led_netdev "wan" "WAN" "blue:net" "eth0"
 	;;
+hinlink,opc-h68k)
+	ucidef_set_led_netdev "wan" "WAN" "blue:net" "eth1"
+	;;
 esac
 
 board_config_flush

target/linux/rockchip/armv8/base-files/etc/board.d/02_network

@@ -24,20 +24,18 @@ rockchip_setup_interfaces()
 	xunlong,orangepi-r1-plus-lts)
 		ucidef_set_interfaces_lan_wan 'eth1' 'eth0'
 		;;
-	hinlink,opc-h68k|\
-	hinlink,opc-h69k)
-		ucidef_set_interfaces_lan_wan 'eth1 eth2 eth3' 'eth0'
-		;;
 	fastrhino,r66s|\
 	firefly,rk3568-roc-pc|\
 	friendlyarm,nanopi-r5c|\
 	radxa,e25)
 		ucidef_set_interfaces_lan_wan 'eth0' 'eth1'
 		;;
+	hinlink,opc-h68k|\
 	fastrhino,r68s|\
 	lyt,t68m)
 		ucidef_set_interfaces_lan_wan 'eth0 eth2 eth3' 'eth1'
 		;;
+	hinlink,opc-h69k|\
 	friendlyarm,nanopi-r5s)
 		ucidef_set_interfaces_lan_wan "eth1 eth2" "eth0"
 		;;
@@ -101,7 +99,6 @@ rockchip_setup_macs()
 		;;
 	friendlyarm,nanopi-r5c|\
 	friendlyarm,nanopi-r5s|\
-        panther,x2|\
 	sharevdi,guangmiao-g4c)
 		wan_mac=$(macaddr_generate_from_mmc_cid mmcblk1)
 		lan_mac=$(macaddr_add "$wan_mac" +1)

target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-opc-h68k.dts

@@ -58,17 +58,15 @@
 };
 
 &mdio0 {
-	rgmii_phy0: phy@0 {
+	rgmii_phy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id001c.c916",
+		compatible = "ethernet-phy-ieee802.3-c22";
-			     "ethernet-phy-ieee802.3-c22";
 		reg = <0x0>;
 	};
 };
 
 &mdio1 {
-	rgmii_phy1: phy@0 {
+	rgmii_phy1: ethernet-phy@0 {
-		compatible = "ethernet-phy-id001c.c916",
+		compatible = "ethernet-phy-ieee802.3-c22";
-			     "ethernet-phy-ieee802.3-c22";
 		reg = <0x0>;
 	};
 };

target/linux/rockchip/files/arch/arm64/boot/dts/rockchip/rk3568-opc-h69k.dts

@@ -10,8 +10,7 @@
 	compatible = "hinlink,opc-h69k", "rockchip,rk3568";
 
 	aliases {
-		ethernet0 = &gmac0;
+		ethernet0 = &gmac1;
-		ethernet1 = &gmac1;
 	};
 
 	vcc5v0_ahci: vcc5v0-ahci {
@@ -28,27 +27,6 @@
 	};
 };
 
-&gmac0 {
-	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
-	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
-	assigned-clock-rates = <0>, <125000000>;
-	clock_in_out = "output";
-	phy-mode = "rgmii-id";
-	pinctrl-names = "default";
-	pinctrl-0 = <&gmac0_miim
-		     &gmac0_tx_bus2
-		     &gmac0_rx_bus2
-		     &gmac0_rgmii_clk
-		     &gmac0_rgmii_bus>;
-	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 20000 100000>;
-	tx_delay = <0x3c>;
-	rx_delay = <0x2f>;
-	phy-handle = <&rgmii_phy0>;
-	status = "okay";
-};
-
 &gmac1 {
 	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
 	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
@@ -70,18 +48,9 @@
 	status = "okay";
 };
 
-&mdio0 {
-	rgmii_phy0: phy@0 {
-		compatible = "ethernet-phy-id001c.c916",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <0x0>;
-	};
-};
-
 &mdio1 {
-	rgmii_phy1: phy@0 {
+	rgmii_phy1: ethernet-phy@0 {
-		compatible = "ethernet-phy-id001c.c916",
+		compatible = "ethernet-phy-ieee802.3-c22";
-			     "ethernet-phy-ieee802.3-c22";
 		reg = <0x0>;
 	};
 };

target/linux/rockchip/image/armv8.mk

@@ -52,35 +52,6 @@ define Device/ezpro_mrkaio-m68s-plus
 endef
 TARGET_DEVICES += ezpro_mrkaio-m68s-plus
 
-define Device/hinlink_common
-  DEVICE_VENDOR := HINLINK
-  UBOOT_DEVICE_NAME := opc-h68k-rk3568
-  IMAGE/sysupgrade.img.gz := boot-common | boot-script nanopi-r5s | pine64-img | gzip | append-metadata
-  DEVICE_PACKAGES := kmod-ata-ahci-platform kmod-hwmon-pwmfan kmod-mt7921e kmod-r8125 wpad-openssl
-endef
-
-define Device/hinlink_opc-h66k
-$(call Device/hinlink_common)
-  DEVICE_MODEL := OPC-H66K
-  SOC := rk3568
-endef
-TARGET_DEVICES += hinlink_opc-h66k
-
-define Device/hinlink_opc-h68k
-$(call Device/hinlink_common)
-  DEVICE_MODEL := OPC-H68K
-  SOC := rk3568
-endef
-TARGET_DEVICES += hinlink_opc-h68k
-
-define Device/hinlink_opc-h69k
-$(call Device/hinlink_common)
-  DEVICE_MODEL := OPC-H69K
-  SOC := rk3568
-  DEVICE_PACKAGES += kmod-usb-serial-option uqmi
-endef
-TARGET_DEVICES += hinlink_opc-h69k
-
 define Device/fastrhino_common
   DEVICE_VENDOR := FastRhino
   SOC := rk3568
@@ -180,13 +151,42 @@ define Device/firefly_station-p2
 endef
 TARGET_DEVICES += firefly_station-p2
 
+define Device/hinlink_common
+  DEVICE_VENDOR := HINLINK
+  UBOOT_DEVICE_NAME := opc-h68k-rk3568
+  IMAGE/sysupgrade.img.gz := boot-common | boot-script nanopi-r5s | pine64-img | gzip | append-metadata
+  DEVICE_PACKAGES := kmod-ata-ahci-platform kmod-hwmon-pwmfan kmod-mt7921e kmod-r8125 wpad-openssl
+endef
+
+define Device/hinlink_opc-h66k
+$(call Device/hinlink_common)
+  DEVICE_MODEL := OPC-H66K
+  SOC := rk3568
+endef
+TARGET_DEVICES += hinlink_opc-h66k
+
+define Device/hinlink_opc-h68k
+$(call Device/hinlink_common)
+  DEVICE_MODEL := OPC-H68K
+  SOC := rk3568
+endef
+TARGET_DEVICES += hinlink_opc-h68k
+
+define Device/hinlink_opc-h69k
+$(call Device/hinlink_common)
+  DEVICE_MODEL := OPC-H69K
+  SOC := rk3568
+  DEVICE_PACKAGES += kmod-mt7916-firmware kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += hinlink_opc-h69k
+
 define Device/lyt_t68m
   DEVICE_VENDOR := LYT
   DEVICE_MODEL := T68M
   SOC := rk3568
   UBOOT_DEVICE_NAME := lyt-t68m-rk3568
   IMAGE/sysupgrade.img.gz := boot-common | boot-script nanopi-r5s | pine64-img | gzip | append-metadata
-  DEVICE_PACKAGES := kmod-r8125 wpad-openssl kmod-mt7921-firmware kmod-mt7922-firmware kmod-mt7921e kmod-mt7916-firmware
+  DEVICE_PACKAGES := kmod-mt7921e kmod-r8125 wpad-openssl
 endef
 TARGET_DEVICES += lyt_t68m