298977887/lede
1
0
Fork 0
mirror of https://github.com/coolsnowwolf/lede.git synced 2025-04-16 14:23:38 +00:00
Code Issues Packages Projects Releases Wiki Activity

add PHICOMM K2T support in ath79 target

Browse Source
This commit is contained in:
coolsnowwolf 2018-08-24 13:31:12 +08:00
parent b5ac2759af
commit 14567c5d31
207 changed files with 28110 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
target/linux/ath79/Makefile Normal file
View File

@ -0,0 +1,19 @@
include $(TOPDIR)/rules.mk
ARCH:=mips
BOARD:=ath79
BOARDNAME:=Atheros ATH79 (DTS)
CPU_TYPE:=24kc
SUBTARGETS:=generic nand tiny
FEATURES:=ramdisk source-only
KERNEL_PATCHVER:=4.14
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
kmod-gpio-button-hotplug swconfig \
kmod-ath9k wpad-mini uboot-envtools
$(eval $(call BuildTarget))

106
target/linux/ath79/base-files/etc/board.d/01_leds Executable file
View File

@ -0,0 +1,106 @@
#!/bin/sh
. /lib/functions/uci-defaults.sh
board_config_update
board=$(board_name)
boardname="${board##*,}"
case "$board" in
avm,fritz300e)
ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$boardname:green:rssi2" "wlan0" "40" "100"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
;;
avm,fritz4020)
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x1E"
;;
buffalo,whr-g301n)
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
;;
etactica,eg200)
ucidef_set_led_netdev "lan" "LAN" "$boardname:red:eth0" "eth0"
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
;;
netgear,wnr612-v2|\
on,n150r)
ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
;;
pcs,cap324)
ucidef_set_led_netdev "lan" "LAN" "pcs:lan:green" "eth0"
;;
pcs,cr3000)
ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "pcs:blue:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "pcs:blue:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02"
;;
tplink,re450-v2)
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
;;
tplink,tl-mr3020-v1|\
tplink,tl-mr3040-v2)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tplink,tl-wr1043nd-v4)
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
tplink,tl-wr740n-v1|\
tplink,tl-wr740n-v3|\
tplink,tl-wr741-v1|\
tplink,tl-wr743nd-v1|\
tplink,tl-wr841-v5|\
tplink,tl-wr941-v4)
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
;;
tplink,tl-wr740nd-v4|\
tplink,tl-wr741nd-v4)
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
tplink,tl-wr841-v9|\
tplink,tl-wr841-v11)
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
ubnt,bullet-m|\
ubnt,nano-m|\
ubnt,rocket-m)
ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100"
esac
board_config_flush
exit 0

209
target/linux/ath79/base-files/etc/board.d/02_network Executable file
View File

@ -0,0 +1,209 @@
#!/bin/sh
. /lib/functions/system.sh
. /lib/functions/uci-defaults.sh
. /lib/functions/k2t.sh
ath79_setup_interfaces()
{
local board="$1"
case "$board" in
avm,fritz300e|\
ocedo,koala|\
ocedo,raccoon|\
pcs,cap324|\
pisen,wmm003n|\
tplink,re450-v2|\
tplink,tl-mr10u|\
tplink,tl-mr3020-v1|\
tplink,tl-mr3040-v2|\
tplink,tl-wr703n|\
ubnt,bullet-m|\
ubnt,rocket-m|\
ubnt,unifiac-lite|\
ubnt,unifiac-mesh|\
ubnt,unifi)
ucidef_set_interface_lan "eth0"
;;
buffalo,wzr-hp-g450h)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
buffalo,bhr-4grv2)
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
;;
dlink,dir-825-b1)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
embeddedwireless,dorin)
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
;;
etactica,eg200)
ucidef_set_interface_lan "eth0" "dhcp"
;;
avm,fritz4020|\
glinet,ar150|\
glinet,ar300m)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
iodata,etg3-r|\
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2|\
pcs,cr5000)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
ucidef_add_switch_attr "switch0" "blinkrate" 2
ucidef_add_switch_port_attr "switch0" 1 led 6
ucidef_add_switch_port_attr "switch0" 2 led 9
ucidef_add_switch_port_attr "switch0" 5 led 2
;;
netgear,wnr612-v2|\
on,n150r)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"
;;
pcs,cr3000)
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
ucidef_set_interface_wan "eth0"
;;
phicomm,k2t)
ucidef_add_switch "switch0" \
"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
;;
tplink,archer-c7-v1|\
tplink,archer-c7-v2|\
tplink,tl-wdr4900-v2)
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
buffalo,whr-g301n|\
tplink,tl-mr3220-v1|\
tplink,tl-mr3420-v1|\
tplink,tl-wr841-v7)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
tplink,tl-wdr3600|\
tplink,tl-wdr4300)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
;;
tplink,tl-wr1043nd-v1)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
;;
tplink,tl-wr1043nd-v2|\
tplink,tl-wr1043nd-v3)
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
;;
tplink,tl-wr1043nd-v4)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
tplink,tl-wr2543-v1)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
;;
tplink,tl-wr740n-v1|\
tplink,tl-wr740n-v3|\
tplink,tl-wr741-v1|\
tplink,tl-wr743nd-v1|\
tplink,tl-wr841-v5|\
tplink,tl-wr941-v4)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
tplink,tl-wr740nd-v4|\
tplink,tl-wr741nd-v4|\
tplink,tl-wr841-v9|\
tplink,tl-wr841-v11)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
tplink,tl-wr941-v2)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
ubnt,unifiac-mesh-pro|\
ubnt,unifiac-pro)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:wan"
;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
esac
}
ath79_setup_macs()
{
local board="$1"
case "$board" in
avm,fritz300e)
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
;;
avm,fritz4020)
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
;;
dlink,dir-825-b1)
lan_mac=$(mtd_get_mac_text "caldata" 65440)
wan_mac=$(mtd_get_mac_text "caldata" 65460)
;;
iodata,etg3-r)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" -1)
;;
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
;;
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0)")
;;
phicomm,k2t)
lan_mac=$(k2t_get_mac "lan_mac")
wan_mac=$(k2t_get_mac "wan_mac")
;;
tplink,tl-wr1043nd-v4)
base_mac=$(mtd_get_mac_binary product-info 8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
tplink,tl-wr941-v2)
base_mac=$(mtd_get_mac_binary u-boot 130048)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
}
board_config_update
board=$(board_name)
ath79_setup_interfaces $board
ath79_setup_macs $board
board_config_flush
exit 0

45
target/linux/ath79/base-files/etc/diag.sh Executable file
View File

@ -0,0 +1,45 @@
#!/bin/sh
. /lib/functions/leds.sh
boot="$(get_dt_led boot)"
failsafe="$(get_dt_led failsafe)"
running="$(get_dt_led running)"
upgrade="$(get_dt_led upgrade)"
set_state() {
status_led="$boot"
case "$1" in
preinit)
status_led_blink_preinit
;;
failsafe)
status_led_off
[ -n "$running" ] && {
status_led="$running"
status_led_off
}
status_led="$failsafe"
status_led_blink_failsafe
;;
preinit_regular)
status_led_blink_preinit_regular
;;
upgrade)
[ -n "$running" ] && {
status_led="$running"
status_led_off
}
status_led="$upgrade"
status_led_blink_preinit_regular
;;
done)
status_led_off
[ -n "$running" ] && {
status_led="$running"
status_led_on
}
;;
esac
}

185
target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom Normal file
View File

@ -0,0 +1,185 @@
#!/bin/sh
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions.sh
. /lib/functions/system.sh
ath9k_eeprom_die() {
echo "ath9k eeprom: " "$*"
exit 1
}
ath9k_eeprom_extract() {
local part=$1
local offset=$2
local count=$3
local mtd
mtd=$(find_mtd_chardev $part)
[ -n "$mtd" ] || \
ath9k_eeprom_die "no mtd device found for partition $part"
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
ath9k_eeprom_die "failed to extract from $mtd"
}
ath9k_eeprom_extract_reverse() {
local part=$1
local offset=$2
local count=$3
local mtd
local reversed
local caldata
mtd=$(find_mtd_chardev "$part")
reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
for byte in $reversed; do
caldata="\x${byte}${caldata}"
done
printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
}
xor() {
local val
local ret="0x$1"
local retlen=${#1}
shift
while [ -n "$1" ]; do
val="0x$1"
ret=$((ret ^ val))
shift
done
printf "%0${retlen}x" "$ret"
}
ath9k_patch_fw_mac() {
local mac=$1
local mac_offset=$2
local chksum_offset=$3
local xor_mac
local xor_fw_mac
local xor_fw_chksum
[ -z "$mac" -o -z "$mac_offset" ] && return
[ -n "$chksum_offset" ] && {
xor_mac=${mac//:/}
xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
}
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$mac_offset count=6
}
ath9k_patch_fw_mac_crc() {
local mac=$1
local mac_offset=$2
local chksum_offset=$((mac_offset - 10))
ath9k_patch_fw_mac "${mac}" "${mac_offset}" "${chksum_offset}"
}
board=$(board_name)
case "$FIRMWARE" in
"ath9k-eeprom-ahb-18100000.wmac.bin")
case $board in
avm,fritz4020)
ath9k_eeprom_extract_reverse "urlader" 5441 1088
;;
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)
ath9k_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;
esac
;;
"ath9k-eeprom-pci-0000:00:00.0.bin")
case $board in
avm,fritz300e)
ath9k_eeprom_extract_reverse "urloader" 5441 1088
;;
buffalo,whr-g301n|\
tplink,tl-wr841-v5|\
tplink,tl-wr941-v4)
ath9k_eeprom_extract "art" 4096 3768
;;
ocedo,raccoon|\
tplink,tl-wdr3600|\
tplink,tl-wdr4300|\
tplink,tl-wdr4900-v2)
ath9k_eeprom_extract "art" 20480 1088
;;
netgear,wnr612-v2|\
on,n150r|\
pcs,cap324|\
tplink,tl-mr3220-v1|\
tplink,tl-mr3420-v1|\
tplink,tl-wr2543-v1|\
tplink,tl-wr740n-v1|\
tplink,tl-wr740n-v3|\
tplink,tl-wr741-v1|\
tplink,tl-wr743nd-v1|\
tplink,tl-wr841-v7|\
ubnt,bullet-m|\
ubnt,nano-m|\
ubnt,rocket-m)
ath9k_eeprom_extract "art" 4096 4096
;;
ubnt,unifi)
ath9k_eeprom_extract "art" 4096 2048
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;
esac
;;
"ath9k-eeprom-pci-0000:00:11.0.bin")
case $board in
dlink,dir-825-b1)
ath9k_eeprom_extract "caldata" 4096 3768
ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 65440) 524
;;
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
ath9k_eeprom_extract "art" 4096 3768
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;
esac
;;
"ath9k-eeprom-pci-0000:00:12.0.bin")
case $board in
dlink,dir-825-b1)
ath9k_eeprom_extract "caldata" 20480 3768
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 65460) 1) 524
;;
netgear,wndr3700|\
netgear,wndr3700v2|\
netgear,wndr3800)
ath9k_eeprom_extract "art" 20480 3768
;;
*)
ath9k_eeprom_die "board $board is not supported yet"
;;
esac
;;
esac

132
target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata Normal file
View File

@ -0,0 +1,132 @@
#!/bin/sh
. /lib/functions/k2t.sh
# xor multiple hex values of the same length
xor() {
local val
local ret="0x$1"
local retlen=${#1}
shift
while [ -n "$1" ]; do
val="0x$1"
ret=$((ret ^ val))
shift
done
printf "%0${retlen}x" "$ret"
}
ath10kcal_die() {
echo "ath10cal: " "$*"
exit 1
}
ath10kcal_from_file() {
local source=$1
local offset=$2
local count=$3
dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $source"
}
ath10kcal_extract() {
local part=$1
local offset=$2
local count=$3
local mtd
mtd=$(find_mtd_chardev $part)
[ -n "$mtd" ] || \
ath10kcal_die "no mtd device found for partition $part"
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $mtd"
}
ath10kcal_patch_mac() {
local mac=$1
[ -z "$mac" ] && return
macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
}
ath10kcal_patch_mac_crc() {
local mac=$1
local mac_offset=6
local chksum_offset=2
local xor_mac
local xor_fw_mac
local xor_fw_chksum
xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
ath10kcal_patch_mac "$mac" && {
xor_mac=${mac//:/}
xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
}
}
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions.sh
. /lib/functions/system.sh
board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
;;
ocedo,koala)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_binary art 12)
;;
openmesh,om5p-ac-v2)
ath10kcal_extract "ART" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
tplink,archer-c7-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
;;
tplink,re450-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
;;
ubnt,unifiac-lite|\
ubnt,unifiac-mesh|\
ubnt,unifiac-mesh-pro|\
ubnt,unifiac-pro)
ath10kcal_extract "EEPROM" 20480 2116
;;
esac
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
case $board in
phicomm,k2t)
ath10kcal_extract "art" 20480 12064
ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac")
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
esac
;;
*)
exit 1
;;
esac

24
target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac Normal file
View File

@ -0,0 +1,24 @@
#!/bin/ash
[ "$ACTION" == "add" ] || exit 0
PHYNBR=${DEVPATH##*/phy}
[ -n $PHYNBR ] || exit 0
. /lib/functions.sh
. /lib/functions/system.sh
. /lib/functions/k2t.sh
board=$(board_name)
case "$board" in
phicomm,k2t)
# The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address
[ "$PHYNBR" -eq 1 ] && \
echo $(k2t_get_mac "lan_mac") > /sys${DEVPATH}/macaddress
;;
*)
;;
esac

55
target/linux/ath79/base-files/lib/functions/k2t.sh Executable file
View File

@ -0,0 +1,55 @@
#!/bin/sh
#
# Copyright (C) 2018 Weijie Gao <hackpascal@gmail.com>
#
# Helper function to extract mac addresses from mtd part for Phicomm K2T
#
. /lib/functions.sh
. /lib/functions/system.sh
. /usr/share/libubox/jshn.sh
k2t_config_load() {
local mtd_blk=$(find_mtd_part config)
if [ -z "$mtd_blk" ]; then
echo "k2t_config_load: no mtd part named config" >&2
exit 1
fi
local json_size=$(dd if=$mtd_blk bs=1 count=8 2>/dev/null)
json_size="0x$json_size"
json_size=$((json_size))
if [ "$?" -ne 0 ]; then
echo "k2t_config_load: invalid json data size" >&2
exit 2
fi
if [ "$json_size" -eq 0 ]; then
echo "k2t_config_load: empty json data" >&2
exit 3
fi
local json_data=$(dd if=$mtd_blk bs=1 skip=8 count=$json_size 2>/dev/null)
json_load "$json_data"
}
k2t_get_mac() {
local old_ns
json_set_namespace "k2t" old_ns
if k2t_config_load; then
json_select "this_dev_info"
json_get_var val "$1"
json_select ..
fi
json_set_namespace old_ns
echo $val
}

24
target/linux/ath79/base-files/lib/upgrade/platform.sh Normal file
View File

@ -0,0 +1,24 @@
#
# Copyright (C) 2011 OpenWrt.org
#
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
platform_check_image() {
return 0
}
platform_do_upgrade() {
local board=$(board_name)
case "$board" in
buffalo,bhr-4grv2)
PART_NAME="rootfs:kernel"
default_do_upgrade "$ARGV"
;;
*)
default_do_upgrade "$ARGV"
;;
esac
}

232
target/linux/ath79/config-4.14 Normal file
View File

@ -0,0 +1,232 @@
CONFIG_AG71XX=y
# CONFIG_AG71XX_DEBUG is not set
CONFIG_AG71XX_DEBUG_FS=y
CONFIG_AR8216_PHY=y
CONFIG_AR8216_PHY_LEDS=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
# CONFIG_ARCH_HAS_SG_CHAIN is not set
# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set
# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=15
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ATH79=y
CONFIG_ATH79_WDT=y
CONFIG_CEVT_R4K=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_BOSTON is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_ATH79=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_SYSFS=y
# CONFIG_GRO_CELLS is not set
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_RESET is not set
CONFIG_LIBFDT=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_GPIO=y
CONFIG_MFD_SYSCON=y
CONFIG_MIPS=y
CONFIG_MIPS_ASID_BITS=8
CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CLOCK_VSYSCALL=y
# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_MIPS_CMDLINE_FROM_DTB=y
# CONFIG_MIPS_ELF_APPENDED_DTB is not set
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
# CONFIG_MIPS_NO_APPENDED_DTB is not set
CONFIG_MIPS_RAW_APPENDED_DTB=y
CONFIG_MIPS_SPRAM=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_LZMA_FW=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_SPLIT_TPLINK_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_SPLIT_WRGG_FW=y
CONFIG_MTD_TPLINK_PARTS=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
# CONFIG_NO_IOPORT_MAP is not set
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_PHY_AR7100_USB is not set
# CONFIG_PHY_AR7200_USB is not set
CONFIG_PINCTRL=y
CONFIG_RATIONAL=y
# CONFIG_RCU_NEED_SEGCBLIST is not set
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_RESET_ATH79=y
CONFIG_RESET_CONTROLLER=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_AR933X=y
CONFIG_SERIAL_AR933X_CONSOLE=y
CONFIG_SERIAL_AR933X_NR_UARTS=2
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SPI=y
CONFIG_SPI_ATH79=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_RB4XX is not set
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y
CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TINY_SRCU=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y

204
target/linux/ath79/dts/ar7100.dtsi Normal file
View File

@ -0,0 +1,204 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,ar7100";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar7100-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns16550a";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
usb_phy: usb-phy@18030000 {
compatible = "qca,ar7100-usb-phy";
reg = <0x18030000 0x10>;
reset-names = "usb-phy", "usb-host", "usb-ohci-dll";
resets = <&rst 4>, <&rst 5>, <&rst 6>;
#phy-cells = <0>;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar7100-gpio";
reg = <0x18040000 0x30>;
interrupts = <2>;
ngpios = <16>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pll: pll-controller@18050000 {
compatible = "qca,ar7100-pll", "syscon";
reg = <0x18050000 0x20>;
clock-names = "ref";
/* The board must provides the ref clock */
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
};
wdt: wdt@18060008 {
compatible = "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
rst: reset-controller@18060024 {
compatible = "qca,ar7100-reset";
reg = <0x18060024 0x4>;
#reset-cells = <1>;
};
pcie0: pcie-controller@180c0000 {
compatible = "qca,ar7100-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x17010000 0x100>;
reg-names = "cfg_base";
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&cpuintc>;
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie0 0>;
status = "disabled";
};
};
};
usb2: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1000>;
interrupt-parent = <&cpuintc>;
interrupts = <3>;
phy-names = "usb-phy";
phys = <&usb_phy>;
has-synopsys-hc-bug;
status = "disabled";
};
usb1: usb@1c000000 {
compatible = "generic-ohci";
reg = <0x1c000000 0x1000>;
interrupt-parent = <&miscintc>;
interrupts = <6>;
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
};
&miscintc {
compatible = "qca,ar7100-misc-intc";
};
&eth0 {
compatible = "qca,ar7100-eth";
reg = <0x19000000 0x200
0x18070000 0x4>;
pll-data = <0x00110000 0x00001099 0x00991099>;
pll-reg = <0x4 0x10 17>;
pll-handle = <&pll>;
phy-mode = "rgmii";
resets = <&rst 9>;
reset-names = "mac";
};
&mdio1 {
builtin-switch;
};
&eth1 {
compatible = "qca,ar7100-eth";
reg = <0x1a000000 0x200
0x18070004 0x4>;
pll-data = <0x00110000 0x00001099 0x00991099>;
pll-reg = <0x4 0x14 19>;
pll-handle = <&pll>;
phy-mode = "rgmii";
resets = <&rst 13>;
reset-names = "mac";
};

251
target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts Normal file
View File

@ -0,0 +1,251 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
compatible = "dlink,dir-825-b1", "qca,ar7161";
model = "D-Link DIR825B1";
aliases {
led-boot = &orange_power;
led-failsafe = &orange_power;
led-running = &blue_power;
led-upgrade = &orange_power;
};
chosen {
bootargs = "console=ttyS0,115200";
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
leds {
compatible = "gpio-leds";
blue_usb {
label = "d-link:blue:usb";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
linux,default-trigger = "usbport";
};
orange_power: orange_power {
label = "d-link:orange:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
blue_power: blue_power {
label = "d-link:blue:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "off";
};
blue_wps {
label = "d-link:blue:wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
orange_planet {
label = "d-link:orange:planet";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
blue_planet {
label = "d-link:blue:planet";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan2g {
label = "d-link:blue:wlan2g";
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "d-link:blue:wlan5g";
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
realtek,initvals = <0x06 0x0108>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
phy-mask = <0x10>;
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
};
};
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_ochi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb2 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_echi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 {
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@0,12 {
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "config";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x050000 0x610000>;
};
caldata: partition@60000 {
label = "caldata";
reg = <0x660000 0x010000>;
read-only;
};
partition@670000 {
label = "unknown";
reg = <0x670000 0x190000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
phy-handle = <&phy4>;
};

34
target/linux/ath79/dts/ar7161_netgear_wndr3700.dts Normal file
View File

@ -0,0 +1,34 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7161_netgear_wndr3700.dtsi"
/ {
compatible = "netgear,wndr3700", "qca,ar7161";
model = "Netgear WNDR3700";
};
&partitions {
partition@0 {
label = "u-boot";
reg = <0x000000 0x050000>;
read-only;
};
partition@50000 {
label = "u-boot-env";
reg = <0x050000 0x020000>;
read-only;
};
partition@70000 {
label = "firmware";
reg = <0x070000 0x780000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};

222
target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi Normal file
View File

@ -0,0 +1,222 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
aliases {
led-boot = &power_orange;
led-failsafe = &power_orange;
led-running = &power_green;
led-upgrade = &power_orange;
};
chosen {
bootargs = "console=ttyS0,115200";
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
reset-leds {
compatible = "reset-leds";
usb_led {
label = "netgear:green:usb";
resets = <&rst 12>;
trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
linux,default-trigger = "usbport";
};
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "netgear:orange:wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
power_green: power_green {
label = "netgear:green:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "off";
};
power_orange: power_orange {
label = "netgear:orange:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wps_green {
label = "netgear:green:wps";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan_green {
label = "netgear:green:wan";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan2g {
label = "netgear:green:wlan2g";
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "netgear:blue:wlan5g";
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
rfkill {
label = "rfkill";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
phy-mask = <0x10>;
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
};
};
&usb_phy {
status = "okay";
};
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_ochi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb2 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
usb_echi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 {
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0x10000>;
mtd-mac-address = <&art 0x0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@0,12 {
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0x10000>;
mtd-mac-address = <&art 0xc>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
};
&eth0 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
mtd-mac-address = <&art 0x00>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&eth1 {
status = "okay";
pll-data = <0x11110000 0x00001099 0x00991099>;
mtd-mac-address = <&art 0x06>;
phy-handle = <&phy4>;
};

34
target/linux/ath79/dts/ar7161_netgear_wndr3700v2.dts Normal file
View File

@ -0,0 +1,34 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7161_netgear_wndr3700.dtsi"
/ {
compatible = "netgear,wndr3700v2", "qca,ar7161";
model = "Netgear WNDR3700v2";
};
&partitions {
partition@0 {
label = "u-boot";
reg = <0x000000 0x050000>;
read-only;
};
partition@50000 {
label = "u-boot-env";
reg = <0x050000 0x020000>;
read-only;
};
partition@70000 {
label = "firmware";
reg = <0x070000 0xf80000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};

35
target/linux/ath79/dts/ar7161_netgear_wndr3800.dts Normal file
View File

@ -0,0 +1,35 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7161_netgear_wndr3700.dtsi"
/ {
compatible = "netgear,wndr3800", "qca,ar7161";
model = "Netgear WNDR3800";
};
&partitions {
partition@0 {
label = "u-boot";
reg = <0x000000 0x050000>;
read-only;
};
partition@50000 {
label = "u-boot-env";
reg = <0x050000 0x020000>;
read-only;
};
partition@70000 {
label = "firmware";
reg = <0x070000 0xf80000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};

85
target/linux/ath79/dts/ar7240.dtsi Normal file
View File

@ -0,0 +1,85 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar724x.dtsi"
/ {
usb_phy: usb-phy {
compatible = "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-ohci-dll";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&ahb {
usb: usb@1b000000 {
compatible = "generic-ohci";
reg = <0x1b000000 0x1000>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
};
&mdio0 {
status = "okay";
compatible = "qca,ar7240-mdio";
builtin-switch;
builtin_switch: switch0@1f {
compatible = "qca,ar8216-builtin";
reg = <0x1f>;
resets = <&rst 8>;
reset-names = "switch";
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
swphy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
};
};
&eth0 {
compatible = "qca,ar7240-eth", "syscon";
pll-data = <0x00110000 0x00001099 0x00991099>;
resets = <&rst 9>;
reset-names = "mac";
phy-mode = "mii";
phy-handle = <&swphy4>;
};
&eth1 {
compatible = "qca,ar7240-eth", "syscon";
pll-data = <0x00110000 0x00001099 0x00991099>;
resets = <&rst 13>;
reset-names = "mac";
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};

192
target/linux/ath79/dts/ar7240_buffalo_whr-g301n.dts Normal file
View File

@ -0,0 +1,192 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7240.dtsi"
/ {
compatible = "buffalo,whr-g301n", "qca,ar7240";
model = "Buffalo WHR-G301N";
aliases {
led-boot = &diag;
led-failsafe = &diag;
led-upgrade = &diag;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
router_on {
label = "router_on";
linux,code = <BTN_2>;
linux,input-type = <EV_SW>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
router_off {
label = "router_off";
linux,code = <BTN_3>;
linux,input-type = <EV_SW>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&switch_led_pins>;
security {
label = "whr-g301n:orange:security";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
diag: diag {
label = "whr-g301n:red:diag";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
router {
label = "whr-g301n:green:router";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "whr-g301n:green:lan1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "whr-g301n:green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "whr-g301n:green:lan3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "whr-g301n:green:lan4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan {
label = "whr-g301n:green:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "whr-g301n:green:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x3e000>;
label = "u-boot";
read-only;
};
partition@3e000 {
reg = <0x3e000 0x2000>;
label = "u-boot-env";
read-only;
};
partition@40000 {
reg = <0x40000 0x3a0000>;
label = "firmware";
};
partition@3e0000 {
reg = <0x3e0000 0x10000>;
label = "user_property";
read-only;
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x120c>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x120c>;
mtd-mac-address-increment = <1>;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002a";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
mtd-mac-address = <&art 0x120c>;
#gpio-cells = <2>;
gpio-controller;
};
};
&pinmux {
switch_led_pins: switch_led_pins {
pinctrl-single,bits = <0x0 0x0 0xf8>;
};
};
&uart {
status = "okay";
};

10
target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dts Normal file
View File

@ -0,0 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_netgear_wnr612-v2.dtsi"
/ {
model = "Netgear WNR612 v2";
compatible = "netgear,wnr612-v2";
};

130
target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi Normal file
View File

@ -0,0 +1,130 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7240.dtsi"
/ {
compatible = "netgear,wnr612-v2", "qca,ar7240";
model = "Netgear WNR612 V2";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "netgear:green:power";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "netgear:green:lan1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "netgear:green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wan {
label = "netgear:green:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
wlan: wlan {
label = "netgear:green:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x40000>;
label = "u-boot";
read-only;
};
partition@40000 {
reg = <0x40000 0x10000>;
label = "u-boot-env";
};
partition@50000 {
reg = <0x50000 0x3a0000>;
label = "firmware";
};
partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002b";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};

10
target/linux/ath79/dts/ar7240_on_n150r.dts Normal file
View File

@ -0,0 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_netgear_wnr612-v2.dtsi"
/ {
model = "ON Network N150R";
compatible = "on,n150r";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v1.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr74xn-v1.dtsi"
/ {
model = "TP-Link TL-WR740N v1/v2";
compatible = "tplink,tl-wr740n-v1";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr740n-v3.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr74xn-v1.dtsi"
/ {
model = "TP-Link TL-WR740N v3";
compatible = "tplink,tl-wr740n-v3";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr741-v1.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr74xn-v1.dtsi"
/ {
model = "TP-Link TL-WR741N/ND v1/v2";
compatible = "tplink,tl-wr741-v1";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr743nd-v1.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr74xn-v1.dtsi"
/ {
model = "TP-Link TL-WR743ND v1";
compatible = "tplink,tl-wr743nd-v1";
};

157
target/linux/ath79/dts/ar7240_tplink_tl-wr74xn-v1.dtsi Normal file
View File

@ -0,0 +1,157 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7240.dtsi"
/ {
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&switch_led_pins>;
led_system: system {
label = "tp-link:green:system";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
firmware: partition@20000 {
reg = <0x20000 0x3d0000>;
label = "firmware";
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002b";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
mtd-mac-address = <&uboot 0x1fc00>;
#gpio-cells = <2>;
gpio-controller;
};
};
&pinmux {
switch_led_pins: pinmux_switch_led_pins {
pinctrl-single,bits = <0x0 0x0 0xf8>;
};
};
&uart {
status = "okay";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr841-v5.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr74xn-v1.dtsi"
/ {
model = "TP-Link TL-WR841N/ND v5/v6";
compatible = "tplink,tl-wr841-v5";
};

9
target/linux/ath79/dts/ar7240_tplink_tl-wr941-v4.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7240_tplink_tl-wr74xn-v1.dtsi"
/ {
model = "TP-Link TL-WR941N/ND v4";
compatible = "tplink,tl-wr941-v4";
};

93
target/linux/ath79/dts/ar7241.dtsi Normal file
View File

@ -0,0 +1,93 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar724x.dtsi"
/ {
usb_phy: usb-phy {
compatible = "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&gpio {
ngpios = <20>;
};
&ahb {
usb: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1000>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
};
&eth0 {
compatible = "qca,ar7241-eth", "syscon";
pll-data = <0x00110000 0x00001099 0x00991099>;
resets = <&rst 9>;
reset-names = "mac";
phy-mode = "mii";
phy-handle = <&swphy4>;
};
&mdio1 {
status = "okay";
resets = <&rst 23>;
reset-names = "mdio";
builtin-switch;
builtin_switch: switch0@1f {
compatible = "qca,ar8216-builtin";
reg = <0x1f>;
resets = <&rst 8>;
reset-names = "switch";
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
swphy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
};
};
&eth1 {
compatible = "qca,ar7241-eth", "syscon", "simple-mfd";
pll-data = <0x00110000 0x00001099 0x00991099>;
resets = <&rst 13>;
reset-names = "mac";
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};

116
target/linux/ath79/dts/ar7241_tplink.dtsi Normal file
View File

@ -0,0 +1,116 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7241.dtsi"
/ {
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
qss {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio_leds: gpio-leds {
compatible = "gpio-leds";
led_system: system {
label = "tp-link:green:system";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
partition@20000 {
reg = <0x20000 0x3d0000>;
label = "firmware";
};
partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
reg = <0x0000 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
mtd-mac-address = <&uboot 0x1fc00>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&gpio {
status = "okay";
};
&uart {
status = "okay";
};

20
target/linux/ath79/dts/ar7241_tplink_tl-mr3220-v1.dts Normal file
View File

@ -0,0 +1,20 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_tplink_tl-mr3x20.dtsi"
/ {
compatible = "tplink,tl-mr3220-v1", "qca,ar7241";
model = "TP-Link TL-MR3220 v1";
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
};

20
target/linux/ath79/dts/ar7241_tplink_tl-mr3420-v1.dts Normal file
View File

@ -0,0 +1,20 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_tplink_tl-mr3x20.dtsi"
/ {
compatible = "tplink,tl-mr3420-v1", "qca,ar7241";
model = "TP-Link TL-MR3420 v1";
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
};

41
target/linux/ath79/dts/ar7241_tplink_tl-mr3x20.dtsi Normal file
View File

@ -0,0 +1,41 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7241_tplink.dtsi"
/ {
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_usb_power {
gpio-export,name = "tp-link:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
};
};
&gpio_leds {
led3g {
label = "tp-link:green:3g";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};

20
target/linux/ath79/dts/ar7241_tplink_tl-wr841-v7.dts Normal file
View File

@ -0,0 +1,20 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_tplink.dtsi"
/ {
compatible = "tplink,tl-wr841-v7", "qca,ar7241";
model = "TP-LINK TL-WR841N/ND v7";
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
};

13
target/linux/ath79/dts/ar7241_ubnt_bullet-m.dts Normal file
View File

@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_ubnt_xm.dtsi"
/ {
compatible = "ubnt,bullet-m", "qca,ar7241";
model = "Ubiquiti Bullet M";
};
&eth1 {
compatible = "syscon", "simple-mfd";
};

9
target/linux/ath79/dts/ar7241_ubnt_nano-m.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_ubnt_xm.dtsi"
/ {
compatible = "ubnt,nano-m", "qca,ar7241";
model = "Ubiquiti Nanostation M";
};

21
target/linux/ath79/dts/ar7241_ubnt_rocket-m.dts Normal file
View File

@ -0,0 +1,21 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar7241_ubnt_xm.dtsi"
/ {
compatible = "ubnt,rocket-m", "qca,ar7241";
model = "Ubiquiti Rocket M";
};
&eth1 {
compatible = "syscon", "simple-mfd";
};
&usb_phy {
status = "okay";
};
&usb {
status = "okay";
};

128
target/linux/ath79/dts/ar7241_ubnt_unifi.dts Normal file
View File

@ -0,0 +1,128 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7241.dtsi"
/ {
compatible = "ubnt,unifi", "qca,ar7241";
model = "Ubiquiti UniFi AP";
aliases {
led-boot = &dome_green;
led-failsafe = &dome_green;
led-running = &dome_green;
led-upgrade = &dome_green;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
dome_green: dome-green {
label = "ubnt:green:dome";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
dome-orange {
label = "ubnt:orange:dome";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
label = "firmware";
reg = <0x050000 0x750000>;
};
partition@3 {
label = "board_config";
reg = <0x7a0000 0x010000>;
read-only;
};
partition@4 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
art: partition@5 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};

135
target/linux/ath79/dts/ar7241_ubnt_xm.dtsi Normal file
View File

@ -0,0 +1,135 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7241.dtsi"
/ {
compatible = "ubnt,xm", "qca,ar7241";
model = "Ubiquiti Networks XM (rev 1.0) board";
aliases {
led-boot = &link4;
led-failsafe = &link4;
};
/* extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
*/
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
link1 {
label = "ubnt:red:link1";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
link2 {
label = "ubnt:orange:link2";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
link3 {
label = "ubnt:green:link3";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
link4: link4 {
label = "ubnt:green:link4";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
/*&pll {
clocks = <&extosc>;
};*/
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
label = "firmware";
reg = <0x050000 0x750000>;
};
partition@3 {
label = "board_config";
reg = <0x7a0000 0x010000>;
read-only;
};
partition@4 {
label = "cfg";
reg = <0x7b0000 0x040000>;
read-only;
};
art: partition@5 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x6>;
};

85
target/linux/ath79/dts/ar7242.dtsi Normal file
View File

@ -0,0 +1,85 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar724x.dtsi"
/ {
usb_phy: usb-phy {
compatible = "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&gpio {
ngpios = <20>;
};
&ahb {
usb: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1000>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
};
&mdio0 {
resets = <&rst 22>;
reset-names = "mdio";
};
&eth0 {
compatible = "qca,ar7242-eth", "syscon", "simple-mfd";
pll-data = <0x16000000 0x00000101 0x00001616>;
pll-reg = <0x4 0x2c 17>;
pll-handle = <&pll>;
resets = <&rst 9>;
reset-names = "mac";
};
&mdio1 {
resets = <&rst 23>;
reset-names = "mdio";
builtin-switch;
builtin_switch: switch0@1f {
compatible = "qca,ar8216-builtin";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1f>;
resets = <&rst 8>;
reset-names = "switch";
};
};
&eth1 {
compatible = "qca,ar7242-eth", "syscon", "simple-mfd";
resets = <&rst 13>;
reset-names = "mac";
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};

168
target/linux/ath79/dts/ar7242_avm_fritz300e.dts Normal file
View File

@ -0,0 +1,168 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242.dtsi"
/ {
compatible = "avm,fritz300e", "qca,ar7242";
model = "AVM FRITZ!WLAN Repeater 300E";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
power: power {
label = "fritz300e:green:power";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
lan {
label = "fritz300e:green:lan";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wlan {
label = "fritz300e:green:wlan";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
ath9k-leds {
compatible = "gpio-leds";
rssi0 {
label = "fritz300e:green:rssi0";
gpios = <&ath9k 10 GPIO_ACTIVE_LOW>;
};
rssi1 {
label = "fritz300e:green:rssi1";
gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
};
rssi2 {
label = "fritz300e:green:rssi2";
gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
};
rssi3 {
label = "fritz300e:green:rssi3";
gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
};
rssi4 {
label = "fritz300e:green:rssi4";
gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
};
};
eth-phy-reset {
compatible = "regulator-fixed";
regulator-name = "eth-phy-reset";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio 11 GPIO_ACTIVE_LOW>;
startup-delay-us = <300000>;
enable-active-high;
regulator-always-on;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x20000>;
label = "urloader";
read-only;
};
partition@20000 {
reg = <0x20000 0xee0000>;
label = "firmware";
};
partition@f00000 {
reg = <0xf00000 0x80000>;
label = "tffs (1)";
read-only;
};
partition@f80000 {
reg = <0xf80000 0x80000>;
label = "tffs (2)";
read-only;
};
};
};
};
&uart {
status = "okay";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
reg = <0x0000 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&phy0>;
pll-data = <0x16000000 0x00000101 0x00001313>;
};

115
target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts Normal file
View File

@ -0,0 +1,115 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242.dtsi"
/ {
compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
model = "Buffalo WZR-HP-G450H";
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
usb {
linux,code = <BTN_2>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
movie_engine {
linux,code = <KEY_RESTART>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
aoss {
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
router_off {
linux,code = <BTN_5>;
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
security {
label = "buffalo:orange:security";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
diag {
label = "buffalo:red:diag";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_usb_power {
gpio-export,name = "wzr-hp-g450h:usb-power";
gpio-export,output = <1>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
};
};
&mdio0 {
status = "okay";
phy-mask = <0x1>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
pll-data = <0x62000000 0 0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&uart {
status = "okay";
};
&usb_phy {
status = "okay";
};
&usb {
status = "okay";
};
&pcie {
status = "okay";
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};

184
target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts Normal file
View File

@ -0,0 +1,184 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242.dtsi"
/ {
compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
model = "TP-LINK TL-WR2543N/ND";
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: wps {
label = "tplink:green:wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
usb {
label = "tplink:green:usb";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan2g {
label = "tplink:green:wlan2g";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "tplink:green:wlan5g";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
rtl8367 {
compatible = "realtek,rtl8367";
gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
};
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x7d0000>;
};
partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
reg = <0x0000 0 0 0 0>;
#gpio-cells = <2>;
gpio-controller;
qca,no-eeprom;
mtd-mac-address = <&uboot 0x1fc00>;
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
mtd-mac-address = <&uboot 0x1fc00>;
phy-handle = <&phy0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};

154
target/linux/ath79/dts/ar724x.dtsi Normal file
View File

@ -0,0 +1,154 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,ar7240";
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "console=ttyS0,115200";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
ahb: ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar9132-ddr-controller",
"qca,ar7240-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns16550a";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar7240-gpio",
"qca,ar7100-gpio";
reg = <0x18040000 0x30>;
interrupts = <2>;
ngpios = <18>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinmux: pinmux@18040028 {
compatible = "pinctrl-single";
reg = <0x18040028 0x8>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x1>;
#pinctrl-cells = <2>;
jtag_disable_pins: pinmux_jtag_disable_pins {
pinctrl-single,bits = <0x0 0x1 0x1>;
};
};
pll: pll-controller@18050000 {
compatible = "qca,ar7240-pll", "syscon";
reg = <0x18050000 0x3c>;
clock-names = "ref";
/* The board must provides the ref clock */
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
};
wdt: wdt@18060008 {
compatible = "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
rst: reset-controller@1806001c {
compatible = "qca,ar7240-reset",
"qca,ar7100-reset";
reg = <0x1806001c 0x4>;
#reset-cells = <1>;
};
pcie: pcie-controller@180c0000 {
compatible = "qcom,ar7240-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x180c0000 0x1000>, /* CRP */
<0x180f0000 0x100>, /* CTRL */
<0x14000000 0x1000>; /* CFG */
reg-names = "crp_base", "ctrl_base", "cfg_base";
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&cpuintc>;
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie 0>;
status = "disabled";
};
};
spi: spi@1f000000 {
compatible = "qca,ar7240-spi",
"qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
};

196
target/linux/ath79/dts/ar9132.dtsi Normal file
View File

@ -0,0 +1,196 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,ar9132";
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "console=ttyS0,115200";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
cpuintc: interrupt-controller {
compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
interrupt-controller;
#interrupt-cells = <1>;
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
};
ahb {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&cpuintc>;
apb {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&miscintc>;
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar9132-ddr-controller",
"qca,ar7240-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns8250";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar9132-gpio",
"qca,ar7100-gpio";
reg = <0x18040000 0x30>;
interrupts = <2>;
ngpios = <22>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pll: pll-controller@18050000 {
compatible = "qca,ar9132-pll",
"qca,ar9130-pll", "syscon";
reg = <0x18050000 0x20>;
clock-names = "ref";
/* The board must provides the ref clock */
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
};
wdt: wdt@18060008 {
compatible = "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
miscintc: interrupt-controller@18060010 {
compatible = "qca,ar9132-misc-intc",
"qca,ar7100-misc-intc";
reg = <0x18060010 0x8>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
interrupt-controller;
#interrupt-cells = <1>;
};
rst: reset-controller@1806001c {
compatible = "qca,ar9132-reset",
"qca,ar7100-reset";
reg = <0x1806001c 0x4>;
#reset-cells = <1>;
};
};
usb: usb@1b000100 {
compatible = "qca,ar7100-ehci", "generic-ehci";
reg = <0x1b000100 0x100>;
interrupts = <3>;
resets = <&rst 5>;
has-transaction-translator;
phy-names = "usb";
phys = <&usb_phy>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar9132-spi", "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
wmac: wmac@180c0000 {
compatible = "qca,ar9130-wmac";
reg = <0x180c0000 0x230000>;
interrupts = <2>;
status = "disabled";
};
};
usb_phy: usb-phy {
compatible = "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&eth0 {
compatible = "qca,ar9130-eth", "syscon";
reg = <0x19000000 0x200
0x18070000 0x4>;
pll-data = <0x1a000000 0x13000a44 0x00441099>;
pll-reg = <0x4 0x14 20>;
pll-handle = <&pll>;
resets = <&rst 9>;
reset-names = "mac";
};

156
target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts Normal file
View File

@ -0,0 +1,156 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9132.dtsi"
/ {
compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
model = "TP-Link TL-WR1043ND Version 1";
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
keys {
compatible = "gpio-keys";
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
button1 {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
usb {
label = "tp-link:green:usb";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
system: system {
label = "tp-link:green:system";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
rtl8366rb {
compatible = "realtek,rtl8366rb";
gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
resets = <&rst 8>;
reset-names = "switch";
};
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x7D0000>;
};
art: partition@7F0000 {
label = "art";
reg = <0x7F0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-mode = "rgmii";
mtd-mac-address = <&uboot 0x1fc00>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

167
target/linux/ath79/dts/ar9132_tplink_tl-wr941-v2.dts Normal file
View File

@ -0,0 +1,167 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9132.dtsi"
/ {
compatible = "tplink,tl-wr941-v2", "qca,ar9132";
model = "TP-Link TL-WR941N/ND v2/v3";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
keys {
compatible = "gpio-keys";
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
button1 {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "tp-link:green:system";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
qss_r {
label = "tp-link:red:qss";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
qss_g {
label = "tp-link:green:qss";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
dsa {
compatible = "marvell,dsa";
#address-cells = <1>;
#size-cells = <0>;
dsa,mii-bus = <&mdio0>;
dsa,ethernet = <&eth0>;
switch@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
port@0 {
reg = <0>;
label = "wan";
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
port@5 {
reg = <5>;
label = "cpu";
};
};
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
};
&eth0 {
status = "okay";
phy-mode = "rmii";
mtd-mac-address = <&uboot 0x1fc00>;
fixed-link {
speed = <100>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

206
target/linux/ath79/dts/ar9330.dtsi Normal file
View File

@ -0,0 +1,206 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,ar9330";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
chosen {
bootargs = "console=ttyATH0,115200";
};
ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar7240-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "qca,ar9330-uart";
reg = <0x18020000 0x14>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_REF>;
clock-names = "uart";
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar7100-gpio";
reg = <0x18040000 0x34>;
interrupts = <2>;
ngpios = <30>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
pinmux: pinmux@18040028 {
compatible = "pinctrl-single";
reg = <0x18040028 0x8>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x1>;
#pinctrl-cells = <2>;
jtag_disable_pins: pinmux_jtag_disable_pins {
pinctrl-single,bits = <0x0 0x1 0x1>;
};
switch_led_pins: pinmux_switch_led_pins {
pinctrl-single,bits = <0x0 0x1f 0xf8>;
};
};
pll: pll-controller@18050000 {
compatible = "qca,ar9330-pll";
reg = <0x18050000 0x100>;
#clock-cells = <1>;
};
rst: reset-controller@1806001c {
compatible = "qca,ar7100-reset";
reg = <0x1806001c 0x4>;
#reset-cells = <1>;
};
};
usb: usb@1b000000 {
compatible = "chipidea,usb2";
reg = <0x1b000000 0x200>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
gmac: gmac@18070000 {
compatible = "qca,ar9330-gmac";
reg = <0x18070000 0x4>;
};
wmac: wmac@18100000 {
compatible = "qca,ar9330-wmac";
reg = <0x18100000 0x20000>;
interrupts = <2>;
status = "disabled";
};
};
usb_phy: usb-phy {
compatible = "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <2>, <3>;
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
};
&eth0 {
compatible = "qca,ar9330-eth", "syscon";
pll-data = <0x00110000 0x00001099 0x00991099>;
resets = <&rst 9>;
reset-names = "mac";
phy-mode = "mii";
phy-handle = <&swphy4>;
};
&mdio1 {
status = "okay";
compatible = "qca,ar9330-mdio";
resets = <&rst 23>;
reset-names = "mdio";
builtin-switch;
builtin_switch: switch0@1f {
compatible = "qca,ar8216-builtin";
reg = <0x1f>;
resets = <&rst 8>;
reset-names = "switch";
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
swphy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
};
};
&eth1 {
compatible = "qca,ar9330-eth", "syscon", "simple-mfd";
pll-data = <0x00110000 0x00001099 0x00991099>;
phy-mode = "gmii";
resets = <&rst 13>;
reset-names = "mac";
fixed-link {
speed = <1000>;
full-duplex;
};
};

147
target/linux/ath79/dts/ar9330_glinet_ar150.dts Normal file
View File

@ -0,0 +1,147 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9330.dtsi"
/ {
model = "GL.iNet GL-AR150";
compatible = "glinet,ar150", "qca,ar9330";
aliases {
serial0 = &uart;
led-boot = &wlan;
led-failsafe = &wlan;
led-upgrade = &wlan;
};
leds {
compatible = "gpio-leds";
wlan: wlan {
label = "gl-ar150:orange:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
lan {
label = "gl-ar150:green:lan";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
wan {
label = "gl-ar150:green:wan";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
manual {
label = "manual";
linux,code = <BTN_7>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
auto {
label = "auto";
linux,code = <BTN_8>;
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
&spi {
num-chipselects = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
label = "firmware";
reg = <0x050000 0xfa0000>;
};
art: partition@3 {
label = "ART";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x0>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x0>;
};

11
target/linux/ath79/dts/ar9331.dtsi Normal file
View File

@ -0,0 +1,11 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9330.dtsi"
/ {
compatible = "qca,ar9331";
ref: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
};
};

70
target/linux/ath79/dts/ar9331_dptechnics_dpt-module.dts Normal file
View File

@ -0,0 +1,70 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "DPTechnics DPT-Module";
compatible = "dptechnics,dpt-module", "qca,ar9331";
aliases {
serial0 = &uart;
};
leds {
compatible = "gpio-leds";
system {
label = "dpt-module:green:system";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <1>;
status = "okay";
/* Winbond 25Q128FVSG SPI flash */
flash@0 {
compatible = "winbond,w25q128", "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
};
};

94
target/linux/ath79/dts/ar9331_dragino_ms14.dts Normal file
View File

@ -0,0 +1,94 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "Dragino MS14 (Dragino 2)";
compatible = "dragino,ms14", "qca,ar9331";
aliases {
serial0 = &uart;
};
leds {
compatible = "gpio-leds";
wlan {
label = "dragino2:red:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
lan {
label = "dragino2:red:lan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan {
label = "dragino2:red:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
};
system {
label = "dragino2:red:system";
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
button0 {
label = "jumpstart";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
button1 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <1>;
status = "okay";
/* Winbond 25Q128BVFG SPI flash */
flash@0 {
compatible = "winbond,w25q128", "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
};
};

120
target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts Normal file
View File

@ -0,0 +1,120 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "Embedded Wireless Dorin";
compatible = "embeddedwireless,dorin", "qca,ar9331";
aliases {
led-boot = &status;
led-failsafe = &status;
led-running = &status;
led-upgrade = &status;
serial0 = &uart;
};
leds {
compatible = "gpio-leds";
status: status {
label = "dorin:green:status";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
label = "firmware";
reg = <0x050000 0xfa0000>;
};
art: partition@3 {
label = "ART";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x1002>;
mtd-mac-address-increment = <0x40>;
};
&mdio1 {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};

130
target/linux/ath79/dts/ar9331_etactica_eg200.dts Normal file
View File

@ -0,0 +1,130 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "eTactica EG200";
compatible = "etactica,eg200", "rme-eg200";
aliases {
serial0 = &uart;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <50>;
restore {
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
modbus {
label = "eg200:red:modbus";
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
etactica {
label = "eg200:red:etactica";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
eth0 {
label = "eg200:red:eth0";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wlan {
label = "eg200:red:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&spi {
num-chipselects = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot@0 {
reg = <0x0 0x40000>;
read-only;
};
uboot-env@40000 {
reg = <0x40000 0x10000>;
read-only;
};
firmware@50000 {
reg = <0x50000 0xfa0000>;
};
art: art@ff0000 {
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};

70
target/linux/ath79/dts/ar9331_onion_omega.dts Normal file
View File

@ -0,0 +1,70 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "Onion Omega";
compatible = "onion,omega", "qca,ar9331";
aliases {
serial0 = &uart;
};
leds {
compatible = "gpio-leds";
system {
label = "onion:amber:system";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb {
dr_mode = "host";
status = "okay";
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <1>;
status = "okay";
/* Winbond 25Q128FVSG SPI flash */
flash@0 {
compatible = "winbond,w25q128", "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
};
};

127
target/linux/ath79/dts/ar9331_pisen_wmm003n.dts Normal file
View File

@ -0,0 +1,127 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "Pisen WMM003N";
compatible = "pisen,wmm003n", "qca,ar9331";
aliases {
serial0 = &uart;
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_system: system {
label = "pisen:blue:system";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
firmware: partition@20000 {
reg = <0x20000 0x7d0000>;
label = "firmware";
};
art: partition@7f0000 {
reg = <0x7f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&gpio {
status = "okay";
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

13
target/linux/ath79/dts/ar9331_tplink_tl-mr10u.dts Normal file
View File

@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr703n_tl-mr10u.dtsi"
/ {
model = "TP-Link TL-MR10U";
compatible = "tplink,tl-mr10u", "qca,ar9331";
};
&reg_usb_vbus {
gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
};

181
target/linux/ath79/dts/ar9331_tplink_tl-mr3020-v1.dts Normal file
View File

@ -0,0 +1,181 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "TP-Link TL-MR3020 V1";
compatible = "tplink,tl-mr3020-v1", "qca,ar9331";
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
lan {
label = "tp-link:green:lan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
};
system: wps {
label = "tp-link:green:wps";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led3g {
label = "tp-link:green:3g";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
keys {
compatible = "gpio-keys";
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
button1 {
label = "sw1";
linux,input-type = <EV_SW>;
linux,code = <BTN_0>;
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
button2 {
label = "sw2";
linux,input-type = <EV_SW>;
linux,code = <BTN_1>;
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <1>;
status = "okay";
/* Spansion S25FL032PIF SPI flash */
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x3c0000>;
};
partition@3e0000 {
label = "config";
reg = <0x3e0000 0x010000>;
read-only;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

165
target/linux/ath79/dts/ar9331_tplink_tl-mr3040-v2.dts Normal file
View File

@ -0,0 +1,165 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
model = "TP-Link TL-MR3040 V2";
compatible = "tplink,tl-mr3040-v2", "qca,ar9331";
aliases {
led-boot = &led_lan;
led-failsafe = &led_lan;
};
leds {
compatible = "gpio-leds";
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
led_lan: lan {
label = "tp-link:green:lan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led3g {
label = "tp-link:green:3g";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
sw1 {
label = "sw1";
linux,input-type = <EV_SW>;
linux,code = <BTN_0>;
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
sw2 {
label = "sw2";
linux,input-type = <EV_SW>;
linux,code = <BTN_1>;
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&spi {
num-chipselects = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

13
target/linux/ath79/dts/ar9331_tplink_tl-wr703n.dts Normal file
View File

@ -0,0 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr703n_tl-mr10u.dtsi"
/ {
model = "TP-Link TL-WR703N";
compatible = "tplink,tl-wr703n", "qca,ar9331";
};
&reg_usb_vbus {
gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
};

123
target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi Normal file
View File

@ -0,0 +1,123 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
system: system {
label = "tl-wr703n:blue:system";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
firmware: partition@20000 {
reg = <0x20000 0x3d0000>;
label = "firmware";
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <0>;
switch-phy-swap = <0>;
};
};
&eth1 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&gpio {
status = "okay";
};
&uart {
status = "okay";
};
&usb {
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

9
target/linux/ath79/dts/ar9331_tplink_tl-wr740nd-v4.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr741nd-v4.dtsi"
/ {
model = "TP-Link TL-WR740N/ND v4";
compatible = "tplink,tl-wr740nd-v4";
};

9
target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tplink_tl-wr741nd-v4.dtsi"
/ {
model = "TP-Link TL-WR741N/ND v4";
compatible = "tplink,tl-wr741nd-v4";
};

156
target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi Normal file
View File

@ -0,0 +1,156 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
model = "TP-Link TL-WR741N/ND v4";
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&switch_led_pins>;
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
system: system {
label = "tp-link:green:system";
gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
firmware: partition@20000 {
reg = <0x20000 0x3d0000>;
label = "firmware";
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&gpio {
status = "okay";
};
&uart {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

26
target/linux/ath79/dts/ar9341.dtsi Normal file
View File

@ -0,0 +1,26 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar934x.dtsi"
/ {
compatible = "qca,ar9341";
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 2>,
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
};
&wmac {
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
&eth0 {
phy-mode = "mii";
};
&eth1 {
status = "okay";
};

172
target/linux/ath79/dts/ar9341_pcs_cr3000.dts Normal file
View File

@ -0,0 +1,172 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
/ {
model = "PowerCloud Systems CR3000";
compatible = "pcs,cr3000", "qca,ar9341";
aliases {
serial0 = &uart;
led-boot = &status;
led-failsafe = &status;
led-running = &status;
led-upgrade = &status;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
status: power {
label = "pcs:amber:power";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "pcs:blue:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wan {
label = "pcs:blue:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan1 {
label = "pcs:blue:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan2 {
label = "pcs:blue:lan2";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan3 {
label = "pcs:blue:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan4 {
label = "pcs:blue:lan4";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x050000 0x07a0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
};
&eth1 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&art 0x0>;
phy-mode = "gmii";
pll-data = <0x06000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};

129
target/linux/ath79/dts/ar9342_iodata_etg3-r.dts Normal file
View File

@ -0,0 +1,129 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
compatible = "iodata,etg3-r", "qca,ar9344";
model = "I-O DATA ETG3-R";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
power: power {
label = "etg3-r:green:power";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
default-state = "on";
};
notification {
label = "etg3-r:green:notification";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "firmware";
reg = <0x050000 0x780000>;
};
partition@7d0000 {
label = "Config";
reg = <0x07d0000 0x10000>;
read-only;
};
partition@7e0000 {
label = "Rsv";
reg = <0x07e0000 0x10000>;
read-only;
};
partition@7f0000 {
label = "ART";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
0x50 0xffb7ffb7 /* LED_CTRL0 */
0x54 0xffb7ffb7 /* LED_CTRL1 */
0x58 0xffb7ffb7 /* LED_CTRL2 */
0x5c 0x03ffff00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x06000000 0x00000101 0x00001616>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
&uart {
status = "okay";
};

62
target/linux/ath79/dts/ar9344.dtsi Normal file
View File

@ -0,0 +1,62 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar934x.dtsi"
/ {
compatible = "qca,ar9344";
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 2>, <&ddr_ctrl 0>,
<&ddr_ctrl 1>;
};
&rst {
intc2: interrupt-controller {
compatible = "qca,ar9340-intc";
interrupt-parent = <&cpuintc>;
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
qca,int-status-addr = <0xac>;
qca,pending-bits = <0xf>, /* wmac */
<0x1f0>; /* pcie rc1 */
qca,ddr-wb-channel-interrupts = <0>, <1>;
qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 3>;
};
};
&apb {
pcie: pcie-controller@180c0000 {
compatible = "qcom,ar9340-pci", "qcom,ar7240-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x180c0000 0x1000>, /* CRP */
<0x180f0000 0x100>, /* CTRL */
<0x14000000 0x1000>; /* CFG */
reg-names = "crp_base", "ctrl_base", "cfg_base";
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&intc2>;
interrupts = <1>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie 0>;
status = "disabled";
};
};
&wmac {
interrupt-parent = <&intc2>;
interrupts = <0>;
};

180
target/linux/ath79/dts/ar9344_ocedo_raccoon.dts Normal file
View File

@ -0,0 +1,180 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
model = "OCEDO Raccoon";
compatible = "ocedo,raccoon", "qca,ar9344";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
leds {
compatible = "gpio-leds";
power {
label = "raccoon:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "raccoon:yellow:wlan24";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
system: system {
label = "raccoon:blue:sys";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan5g {
label = "raccoon:red:wlan5";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "firmware";
reg = <0x050000 0x740000>;
};
partition@790000 {
label = "vendor";
reg = <0x790000 0x740000>;
read-only;
};
partition@ed0000 {
label = "data";
reg = <0xed0000 0x110000>;
read-only;
};
partition@fe0000 {
label = "id";
reg = <0xfe0000 0x010000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0030";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&art 0xc>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x6>;
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M */
pll-data = <0x06000000 0x00000101 0x00001616>;
mtd-mac-address = <&art 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};

179
target/linux/ath79/dts/ar9344_pcs_cap324.dts Normal file
View File

@ -0,0 +1,179 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
model = "PowerCloud Systems CAP324";
compatible = "pcs,cap324", "qca,ar9344";
aliases {
serial0 = &uart;
led-boot = &status;
led-failsafe = &status;
led-running = &status;
led-upgrade = &status;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
power_amber {
label = "pcs:amber:power";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "off";
};
status: power_green {
label = "pcs:green:power";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan_amber {
label = "pcs:amber:wlan";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
wlan_green {
label = "pcs:green:wlan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
lan_amber {
label = "pcs:lan:amber";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan_green {
label = "pcs:lan:green";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x050000 0x0fa0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "168c,0030";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <(-2)>;
mtd-cal-data = <&art 0x5000>;
qca,no-eeprom;
qca,disable-5ghz;
#gpio-cells = <2>;
gpio-controller;
};
};
&wmac {
status = "okay";
qca,disable-2ghz;
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <(-1)>;
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M */
pll-data = <0x06000000 0x00000101 0x00001616>;
mtd-mac-address = <&art 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};

229
target/linux/ath79/dts/ar9344_pcs_cr5000.dts Normal file
View File

@ -0,0 +1,229 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
model = "PowerCloud Systems CR5000";
compatible = "pcs,cr5000", "qca,ar9344";
aliases {
serial0 = &uart;
led-boot = &status;
led-failsafe = &status;
led-running = &status;
led-upgrade = &status;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
status: power {
label = "pcs:amber:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>,
<&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "pcs:blue:wlan";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wps_white {
label = "pcs:white:wps";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x050000 0x07a0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&usb {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0030";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&art 0x5002>;
#gpio-cells = <2>;
gpio-controller;
};
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
0x10 0x81000080 /* POWER_ON_STRAP */
0x50 0xcc35cc35 /* LED_CTRL0 */
0x54 0xca35ca35 /* LED_CTRL1 */
0x58 0xc935c935 /* LED_CTRL2 */
0x5c 0x03ffff00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
/* default for ar934x, except for 1000M */
pll-data = <0x06000000 0x00000101 0x00001616>;
mtd-mac-address = <&art 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
aliases {
ag0 = &eth1;
};
port@0 {
compatible = "swconfig,port";
reg = <0>;
swconfig,segment = "lan";
swconfig,portmap = <1 1>;
};
port@1 {
compatible = "swconfig,port";
reg = <1>;
swconfig,segment = "lan";
swconfig,portmap = <2 2>;
};
port@2 {
compatible = "swconfig,port";
reg = <2>;
swconfig,segment = "lan";
swconfig,portmap = <3 3>;
};
port@3 {
compatible = "swconfig,port";
reg = <3>;
swconfig,segment = "lan";
swconfig,portmap = <4 4>;
};
port@4 {
compatible = "swconfig,port";
reg = <4>;
swconfig,segment = "wan";
swconfig,portmap = <5 5>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};

9
target/linux/ath79/dts/ar9344_tplink_tl-wdr3600.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9344_tplink_tl-wdr4300.dtsi"
/ {
model = "TP-Link WDR3600";
compatible = "tplink,tl-wdr3600";
};

9
target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dts Normal file
View File

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9344_tplink_tl-wdr4300.dtsi"
/ {
model = "TP-Link WDR4300";
compatible = "tplink,tl-wdr4300";
};

243
target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi Normal file
View File

@ -0,0 +1,243 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
model = "TP-Link WDR4300";
compatible = "tplink,tl-wdr4300";
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
leds {
compatible = "gpio-leds";
usb1 {
label = "tp-link:green:usb1";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port1>;
linux,default-trigger = "usbport";
};
usb2 {
label = "tp-link:green:usb2";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port2>;
linux,default-trigger = "usbport";
};
wlan2g {
label = "tp-link:green:wlan2g";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
system: system {
label = "tp-link:green:system";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wifi {
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb1_power {
gpio-export,name = "tp-link:power:usb1";
gpio-export,output = <1>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
gpio_usb2_power {
gpio-export,name = "tp-link:power:usb2";
gpio-export,output = <1>;
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
gpio_ext_lna0 {
gpio-export,name = "tp-link:ext:lna0";
gpio-export,output = <1>;
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
};
gpio_ext_lna1 {
gpio-export,name = "tp-link:ext:lna1";
gpio-export,output = <1>;
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x7d0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
#trigger-source-cells = <0>;
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
hub_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
&usb_phy {
status = "okay";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&uboot 0x1fc00>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
0x10 0x80000080 /* POWER_ON_STRIP */
0x50 0xc737c737 /* LED_CTRL0 */
0x54 0x00000000 /* LED_CTRL1 */
0x58 0x00000000 /* LED_CTRL2 */
0x5c 0x0030c300 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M */
pll-data = <0x06000000 0x00000101 0x00001616>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-2)>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};

255
target/linux/ath79/dts/ar934x.dtsi Normal file
View File

@ -0,0 +1,255 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,ar9340";
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "console=ttyS0,115200";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips74Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
ref: ref {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-output-names = "ref";
};
};
ahb {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <1>;
apb: apb {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <1>;
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar9340-ddr-controller",
"qca,ar7240-ddr-controller";
reg = <0x18000000 0x12c>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns16550a";
reg = <0x18020000 0x2c>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_REF>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar9340-gpio";
reg = <0x18040000 0x2c>;
interrupts = <2>;
ngpios = <23>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinmux: pinmux@1804002c {
compatible = "pinctrl-single";
reg = <0x1804002c 0x44>;
#size-cells = <0>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x1>;
#pinctrl-cells = <2>;
jtag_disable_pins: pinmux_jtag_disable_pins {
pinctrl-single,bits = <0x40 0x2 0x2>;
};
};
pll: pll-controller@18050000 {
compatible = "qca,ar9340-pll", "syscon";
reg = <0x18050000 0x4c>;
#clock-cells = <1>;
clocks = <&ref>;
clock-names = "ref";
clock-output-names = "cpu", "ddr", "ahb";
};
wdt: wdt@18060008 {
compatible = "qca,ar9340-wdt", "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
rst: reset-controller@1806001c {
compatible = "qca,ar9340-reset", "qca,ar7100-reset";
reg = <0x1806001c 0x4>;
#reset-cells = <1>;
};
gmac: gmac@18070000 {
compatible = "qca,ar9340-gmac";
reg = <0x18070000 0x14>;
};
wmac: wmac@18100000 {
compatible = "qca,ar9340-wmac";
reg = <0x18100000 0x20000>;
status = "disabled";
};
};
usb: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1d8>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar9340-spi", "qca,ar7100-spi";
reg = <0x1f000000 0x1c>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
usb_phy: usb-phy {
compatible = "qca,ar9340-usb-phy", "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
};
&mdio0 {
compatible = "qca,ar9340-mdio";
resets = <&rst 22>;
reset-names = "mdio";
};
&eth0 {
compatible = "qca,ar9340-eth", "syscon", "simple-mfd";
pll-data = <0x16000000 0x00000101 0x00001616>;
pll-reg = <0x4 0x2c 17>;
pll-handle = <&pll>;
resets = <&rst 9>;
reset-names = "mac";
};
&mdio1 {
status = "okay";
compatible = "qca,ar9340-mdio";
resets = <&rst 23>;
reset-names = "mdio";
builtin-switch;
builtin_switch: switch0@1f {
compatible = "qca,ar8229-builtin";
reg = <0x1f>;
resets = <&rst 8>;
reset-names = "switch";
phy-mode = "gmii";
phy4-mii-enable;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
swphy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "mii";
};
swphy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
};
};
&eth1 {
compatible = "qca,ar9340-eth", "syscon", "simple-mfd";
resets = <&rst 13>;
reset-names = "mac";
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};

89
target/linux/ath79/dts/ath79.dtsi Normal file
View File

@ -0,0 +1,89 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/ {
#address-cells = <1>;
#size-cells = <1>;
cpuintc: interrupt-controller {
compatible = "qca,ar7100-cpu-intc";
interrupt-controller;
#interrupt-cells = <1>;
};
ahb {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&cpuintc>;
apb {
compatible = "simple-bus";
ranges;
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&miscintc>;
miscintc: interrupt-controller@18060010 {
compatible = "qca,ar7240-misc-intc";
reg = <0x18060010 0x4>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
eth0: eth@19000000 {
status = "disabled";
compatible = "qca,ath79-eth", "syscon", "simple-mfd";
reg = <0x19000000 0x200>;
interrupts = <4>;
phy-mode = "mii";
mdio0: mdio-bus {
status = "disabled";
compatible = "qca,ath79-mdio";
#address-cells = <1>;
#size-cells = <0>;
regmap = <&eth0>;
clocks = <&pll ATH79_CLK_MDIO>;
clock-names = "ref";
};
};
eth1: eth@1a000000 {
status = "disabled";
compatible = "qca,ath79-eth", "syscon", "simple-mfd";
reg = <0x1a000000 0x200>;
interrupts = <5>;
phy-mode = "mii";
mdio1: mdio-bus {
status = "disabled";
compatible = "qca,ath79-mdio";
#address-cells = <1>;
#size-cells = <0>;
regmap = <&eth1>;
clocks = <&pll ATH79_CLK_MDIO>;
clock-names = "ref";
};
};
};
};

286
target/linux/ath79/dts/qca9533.dtsi Normal file
View File

@ -0,0 +1,286 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,qca9533";
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "console=ttyS0,115200n8";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <25000000>;
};
ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar9530-ddr-controller",
"qca,ar7240-ddr-controller";
reg = <0x18000000 0x128>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns16550a";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_REF>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
usb_phy: usb-phy@18030000 {
compatible = "qca,ar7200-usb-phy";
reg = <0x18030000 0x100>;
#phy-cells = <0>;
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar9530-gpio",
"qca,ar9340-gpio";
reg = <0x18040000 0x28>;
interrupts = <2>;
ngpios = <20>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinmux: pinmux@1804002c {
compatible = "pinctrl-single";
reg = <0x1804002c 0x48>;
#size-cells = <0>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x1>;
#pinctrl-cells = <2>;
jtag_disable_pins: pinmux_jtag_disable_pins {
pinctrl-single,bits = <0x40 0x2 0x2>;
};
};
pll: pll-controller@18050000 {
compatible = "qca,qca9530-pll", "syscon";
reg = <0x18050000 0x48>;
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
clocks = <&extosc>;
};
wdt: wdt@18060008 {
compatible = "qca,qca9530-wdt", "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
rst: reset-controller@1806001c {
compatible = "qca,qca9530-reset",
"qca,ar7100-reset";
reg = <0x1806001c 0xac>;
#reset-cells = <1>;
intc2: interrupt-controller {
compatible = "qca,ar9340-intc";
interrupt-parent = <&cpuintc>;
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
qca,int-status-addr = <0xac>;
qca,pending-bits = <0xf>, /* wmac */
<0x1f0>; /* pcie rc1 */
qca,ddr-wb-channel-interrupts = <0>, <1>;
qca,ddr-wb-channels = <&ddr_ctrl 4>, <&ddr_ctrl 3>;
};
};
pcie0: pcie-controller@180c0000 {
compatible = "qcom,ar7240-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x180c0000 0x1000>, /* CRP */
<0x180f0000 0x100>, /* CTRL */
<0x14000000 0x1000>; /* CFG */
reg-names = "crp_base", "ctrl_base", "cfg_base";
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&intc2>;
interrupts = <1>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie0 0>;
status = "disabled";
};
gmac: gmac@18070000 {
compatible = "qca,ar9330-gmac";
reg = <0x18070000 0x4>;
};
wmac: wmac@18100000 {
compatible = "qca,qca9530-wmac";
reg = <0x18100000 0x230000>;
interrupt-parent = <&intc2>;
interrupts = <0>;
status = "disabled";
};
};
usb0: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1000>;
interrupts = <3>;
resets = <&rst 5>;
reset-names = "usb-host";
dr_mode = "host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar9530-spi", "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 2>, <&ddr_ctrl 0>,
<&ddr_ctrl 1>;
};
&eth0 {
compatible = "qca,qca9530-eth", "syscon";
pll-data = <0x82000101 0x80000101 0x80001313>;
reg = <0x19000000 0x200
0x18070000 0x4>;
pll-reg = <0x4 0x2c 17>;
pll-handle = <&pll>;
reset-names = "mac";
resets = <&rst 9>;
phy-mode = "mii";
};
&mdio1 {
status = "okay";
resets = <&rst 23>;
reset-names = "mdio";
builtin-switch;
builtin_switch: switch0@1f {
compatible = "qca,ar8229-builtin";
reg = <0x1f>;
resets = <&rst 8>;
reset-names = "switch";
phy-mode = "gmii";
phy4-mii-enable;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
swphy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "mii";
};
swphy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
};
};
&eth1 {
status = "okay";
compatible = "qca,qca9530-eth", "syscon", "simple-mfd";
resets = <&rst 13>;
reset-names = "mac";
phy-mode = "gmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};

102
target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi Normal file
View File

@ -0,0 +1,102 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9533.dtsi"
/ {
compatible = "glinet,ar300m", "qca,qca9533";
model = "GL.iNet GL-AR300M";
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
button1 {
label = "button right";
linux,code = <BTN_0>;
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
button3 {
label = "button left";
linux,code = <BTN_1>;
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
usb {
label = "gl-ar300m:green:usb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
wlan {
label = "gl-ar300m:green:wlan";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan {
label = "gl-ar300m:green:lan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
status {
label = "gl-ar300m:green:status";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
status = "okay";
};
&uart {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-soruce-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
phy-handle = <&swphy4>;
};
&eth1 {
mtd-mac-address = <&art 0x6>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x1002>;
};

63
target/linux/ath79/dts/qca9533_glinet_ar300m_nand.dts Normal file
View File

@ -0,0 +1,63 @@
/dts-v1/;
#include "qca9533_glinet_ar300m.dtsi"
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "winbond,w25q128", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
label = "reserved";
reg = <0x050000 0xfa0000>;
};
art: partition@3 {
label = "art";
reg = <0xff0000 0x010000>;
};
};
};
flash@1 {
compatible = "spinand,mt29f";
reg = <1>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x000000 0x0200000>;
};
partition@1 {
label = "ubi";
reg = <0x200000 0x7e00000>;
};
};
};
};

44
target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts Normal file
View File

@ -0,0 +1,44 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9533_glinet_ar300m.dtsi"
&spi {
status = "okay";
num-cs = <0>;
flash@0 {
compatible = "winbond,w25q128", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
label = "firmware";
reg = <0x050000 0xfa0000>;
};
art: partition@3 {
label = "art";
reg = <0xff0000 0x010000>;
};
};
};
};

33
target/linux/ath79/dts/qca9533_tplink_tl-wr841-v11.dts Normal file
View File

@ -0,0 +1,33 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9533_tplink_tl-wr841.dtsi"
/ {
compatible = "tplink,tl-wr841-v11", "qca,qca9533";
model = "TP-Link TL-WR841N/ND Version 11";
aliases {
led-boot = &system_led;
led-failsafe = &system_led;
led-running = &system_led;
led-upgrade = &system_led;
};
};
&gpio_leds {
system_led: system {
label = "tp-link:green:system";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan_orange {
label = "tp-link:orange:wan";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};

19
target/linux/ath79/dts/qca9533_tplink_tl-wr841-v9.dts Normal file
View File

@ -0,0 +1,19 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9533_tplink_tl-wr841.dtsi"
/ {
compatible = "tplink,tl-wr841-v9", "qca,qca9533";
model = "TP-Link TL-WR841N/ND Version 9";
aliases {
led-boot = &qss_led;
led-failsafe = &qss_led;
led-running = &qss_led;
led-upgrade = &qss_led;
};
};

134
target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi Normal file
View File

@ -0,0 +1,134 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9533.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
gpio_leds: leds {
compatible = "gpio-leds";
wifi {
label = "tp-link:green:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
qss_led: qss {
label = "tp-link:green:qss";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
rfkill {
label = "RFKILL button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&eth1 {
mtd-mac-address = <&uboot 0x1fc00>;
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

324
target/linux/ath79/dts/qca9557.dtsi Normal file
View File

@ -0,0 +1,324 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,qca9557";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips74Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar9557-ddr-controller",
"qca,ar7240-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns16550a";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_REF>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
usb_phy0: usb-phy0 {
compatible ="qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
#phy-cells = <0>;
status = "disabled";
};
usb_phy1: usb-phy1 {
compatible = "qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst2 4>, <&rst2 3>;
#phy-cells = <0>;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar9557-gpio",
"qca,ar9340-gpio";
reg = <0x18040000 0x28>;
interrupts = <2>;
ngpios = <24>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinmux: pinmux@1804002c {
compatible = "pinctrl-single";
reg = <0x1804002c 0x40>;
#size-cells = <0>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x1>;
#pinctrl-cells = <2>;
jtag_disable_pins: pinmux_jtag_disable_pins {
pinctrl-single,bits = <0x40 0x2 0x2>;
};
};
pll: pll-controller@18050000 {
compatible = "qca,ar9557-pll",
"qca,qca9550-pll", "syscon";
reg = <0x18050000 0x50>;
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
clocks = <&extosc>;
};
wdt: wdt@18060008 {
compatible = "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
rst: reset-controller@1806001c {
compatible = "qca,qca9550-reset",
"qca,ar7100-reset",
"simple-bus";
reg = <0x1806001c 0x4>;
#reset-cells = <1>;
interrupt-parent = <&cpuintc>;
intc2: interrupt-controller2 {
compatible = "qca,ar9340-intc";
interrupt-parent = <&cpuintc>;
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
qca,int-status-addr = <0xac>;
qca,pending-bits = <0xf>, /* wmac */
<0x1f0>; /* pcie rc 0 */
};
intc3: interrupt-controller3 {
compatible = "qca,ar9340-intc";
interrupt-parent = <&cpuintc>;
interrupts = <3>;
interrupt-controller;
#interrupt-cells = <1>;
qca,int-status-addr = <0xac>;
qca,pending-bits = <0x1f000>, /* pcie rc 1 */
<0x1000000>, /* usb1 */
<0x10000000>; /* usb2 */
};
};
rst2: reset-controller@180600c0 {
compatible = "qca,qca9550-reset",
"qca,ar7100-reset",
"simple-bus";
reg = <0x180600c0 0x4>;
#reset-cells = <1>;
};
pcie0: pcie-controller@180c0000 {
compatible = "qcom,ar7240-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x180c0000 0x1000>, /* CRP */
<0x180f0000 0x100>, /* CTRL */
<0x14000000 0x1000>; /* CFG */
reg-names = "crp_base", "ctrl_base", "cfg_base";
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&intc2>;
interrupts = <1>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie0 0>;
status = "disabled";
};
pcie1: pcie-controller@18250000 {
compatible = "qcom,ar7240-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x18250000 0x1000>, /* CRP */
<0x18280000 0x100>, /* CTRL */
<0x16000000 0x1000>; /* CFG */
reg-names = "crp_base", "ctrl_base", "cfg_base";
ranges = <0x2000000 0 0x12000000 0x12000000 0 0x02000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&intc3>;
interrupts = <0>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie1 0>;
status = "disabled";
};
gmac: gmac@18070000 {
compatible = "qca,qca9550-gmac";
reg = <0x18070000 0x14>;
};
wmac: wmac@18100000 {
compatible = "qca,qca9550-wmac";
reg = <0x18100000 0x10000>;
interrupt-parent = <&intc2>;
interrupts = <0>;
status = "disabled";
};
};
usb0: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1fc>;
interrupt-parent = <&intc3>;
interrupts = <1>;
resets = <&rst 5>;
reset-names = "usb-host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy0";
phys = <&usb_phy0>;
status = "disabled";
};
usb1: usb@1b400000 {
compatible = "generic-ehci";
reg = <0x1b400000 0x1fc>;
interrupt-parent = <&intc3>;
interrupts = <2>;
resets = <&rst2 5>;
reset-names = "usb-host";
has-transaction-translator;
caps-offset = <0x100>;
phy-names = "usb-phy1";
phys = <&usb_phy1>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar9557-spi", "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&mdio0 {
resets = <&rst 22>;
reset-names = "mdio";
};
&eth0 {
compatible = "qca,qca9550-eth", "syscon", "simple-mfd";
pll-reg = <0 0x28 0>;
pll-handle = <&pll>;
pll-data = <0x16000000 0x00000101 0x00001616>;
phy-mode = "rgmii";
resets = <&rst 9>;
reset-names = "mac";
};
&mdio1 {
resets = <&rst 23>;
reset-names = "mdio";
};
&eth1 {
compatible = "qca,qca9550-eth", "syscon", "simple-mfd";
pll-reg = <0 0x48 0>;
pll-handle = <&pll>;
pll-data = <0x16000000 0x00000101 0x00001616>;
phy-mode = "sgmii";
resets = <&rst 13>;
reset-names = "mac";
};

216
target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi Normal file
View File

@ -0,0 +1,216 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
leds {
compatible = "gpio-leds";
power: power {
label = "iodata:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
copy {
label = "iodata:green:copy";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "off";
};
eco {
label = "iodata:green:eco";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wlan5g {
label = "iodata:green:wlan5g";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wlan2g {
label = "iodata:green:wlan2g";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
notification {
label = "iodata:amber:notification";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
button_eco {
label = "eco";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
debounce-interval = <60>;
};
auto {
label = "auto";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
button_copy {
label = "copy";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
router {
label = "router";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x030000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x030000 0x010000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x040000 0xe50000>;
};
partition@e90000 {
label = "manufacture";
reg = <0xe90000 0x100000>;
read-only;
};
partition@f90000 {
label = "backup";
reg = <0xf90000 0x010000>;
read-only;
};
partition@fa0000 {
label = "storage";
reg = <0xfa0000 0x050000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x87600000 /* PORT0 PAD MODE CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x56000000 0x00000101 0x00001616>;
phy-handle = <&phy0>;
};
&pcie1 {
status = "okay";
wifi@0,0 {
compatible = "pci168c,003c";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};
&uart {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb0 {
status = "okay";
};
&wmac {
status = "okay";
qca,no-eeprom;
};

12
target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557_iodata_wn-ac-dgr.dtsi"
/ {
compatible = "iodata,wn-ac1167dgr", "qca,qca9557";
model = "I-O DATA WN-AC1167DGR";
};

12
target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557_iodata_wn-ac-dgr.dtsi"
/ {
compatible = "iodata,wn-ac1600dgr2", "qca,qca9557";
model = "I-O DATA WN-AC1600DGR2";
};

155
target/linux/ath79/dts/qca9558_buffalo_bhr-4grv2.dts Normal file
View File

@ -0,0 +1,155 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
compatible = "buffalo,bhr-4grv2", "qca,qca9557";
model = "Buffalo BHR-4GRV2";
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "bhr-4grv2:green:power";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "on";
};
diag {
label = "bhr-4grv2:orange:diag";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
default-state = "off";
};
vpn_orange {
label = "bhr-4grv2:orange:vpn";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "off";
};
vpn_green {
label = "bhr-4grv2:green:vpn";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
eco {
label = "eco";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
read-only;
};
partition@50000 {
label = "rootfs";
reg = <0x050000 0xe30000>;
};
partition@e80000 {
label = "kernel";
reg = <0xe80000 0x170000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x80080080 /* PORT0 PAD MODE CTRL */
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
phy-handle = <&phy0>;
pll-data = <0x56000000 0x00000101 0x00001616>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x6>;
pll-data = <0x03000101 0x00000101 0x00001616>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&uart {
status = "okay";
};

172
target/linux/ath79/dts/qca9558_ocedo_koala.dts Normal file
View File

@ -0,0 +1,172 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
compatible = "ocedo,koala", "qca,qca9557";
model = "OCEDO Koala";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
leds {
compatible = "gpio-leds";
power {
label = "koala:green:power";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wifi2 {
label = "koala:yellow:wlan2";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
default-state = "off";
};
wifi5 {
label = "koala:red:wlan58";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
default-state = "off";
};
system: system {
label = "koala:blue:sys";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
status = "okay";
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "firmware";
reg = <0x050000 0x740000>;
};
partition@790000 {
label = "vendor";
reg = <0x790000 0x740000>;
read-only;
};
partition@ed0000 {
label = "data";
reg = <0xed0000 0x110000>;
read-only;
};
partition@fe0000 {
label = "id";
reg = <0xfe0000 0x010000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x06>;
};
&mdio0 {
status = "okay";
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii-rxid";
at803x-disable-smarteee;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x00>;
phy-handle = <&phy5>;
phy-mode = "rgmii-rxid";
pll-data = <0xae000000 0xa0000101 0xa0001313>;
gmac-config {
device = <&gmac>;
rxdv-delay = <3>;
rxd-delay = <3>;
txen-delay = <0>;
txd-delay = <0>;
rgmii-enabled = <1>;
};
};

171
target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts Normal file
View File

@ -0,0 +1,171 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
compatible = "openmesh,om5p-ac-v2", "qca,qca9557";
model = "OpenMesh OM5P-AC V2";
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
leds {
compatible = "gpio-leds";
power {
label = "om5pac:blue:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wifi_green {
label = "om5pac:green:wifi";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wifi_yellow {
label = "om5pac:yellow:wifi";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wifi_red {
label = "om5pac:red:wifi";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
button0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_pa_dcdc {
gpio-export,name = "om5pac:pa_dcdc";
gpio-export,output = <1>;
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
};
gpio_pa_high {
gpio-export,name = "om5pac:pa_high";
gpio-export,output = <1>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
};
};
&pinmux {
pinmux_pa_dcdc_pins {
pinctrl-single,bits = <0x0 0xff00 0x0>;
};
pinmux_pa_high_pins {
pinctrl-single,bits = <0x10 0xff 0x0>;
};
};
&pcie0 {
status = "okay";
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@1 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@2 {
label = "firmware";
reg = <0x850000 0x7a0000>;
};
partition@3 {
label = "ART";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii-id";
};
};
&mdio1 {
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
phy-mode = "sgmii";
};
};
&eth0 {
status = "okay";
pll-data = <0x82000101 0x80000101 0x80001313>;
phy-handle = <&phy4>;
phy-mode = "rgmii";
};
&eth1 {
status = "okay";
pll-data = <0x03000101 0x80000101 0x80001313>;
phy-handle = <&phy1>;
phy-mode = "sgmii";
};

46
target/linux/ath79/dts/qca9558_tplink_archer-c7-v1.dts Normal file
View File

@ -0,0 +1,46 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9558_tplink_archer-c7.dtsi"
/ {
compatible = "tplink,archer-c7-v1", "qca,qca9558";
model = "TP-Link Archer C7 Version 1";
};
&gpio_keys {
rfkill {
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
};
&gpio_leds {
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
&mtdparts {
uboot: u-boot@0 {
reg = <0x000000 0x020000>;
read-only;
};
firmware@20000 {
reg = <0x020000 0x7d0000>;
};
art: art@7f0000 {
reg = <0x7f0000 0x010000>;
read-only;
};
};

46
target/linux/ath79/dts/qca9558_tplink_archer-c7-v2.dts Normal file
View File

@ -0,0 +1,46 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9558_tplink_archer-c7.dtsi"
/ {
compatible = "tplink,archer-c7-v2", "qca,qca9558";
model = "TP-Link Archer C7 Version 2";
};
&gpio_keys {
rfkill {
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
};
&gpio_leds {
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
&mtdparts {
uboot: u-boot@0 {
reg = <0x000000 0x020000>;
read-only;
};
firmware@20000 {
reg = <0x020000 0xfd0000>;
};
art: art@ff0000 {
reg = <0xff0000 0x010000>;
read-only;
};
};

197
target/linux/ath79/dts/qca9558_tplink_archer-c7.dtsi Normal file
View File

@ -0,0 +1,197 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
gpio_leds: leds {
compatible = "gpio-leds";
system: system {
label = "tp-link:green:system";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
usb1 {
label = "tp-link:green:usb1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port1>;
linux,default-trigger = "usbport";
};
usb2 {
label = "tp-link:green:usb2";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
led_wlan2g: wlan2g {
label = "tp-link:green:wlan2g";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
gpio_keys: keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb1_power {
gpio-export,name = "tp-link:power:usb1";
gpio-export,output = <1>;
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
gpio_usb2_power {
gpio-export,name = "tp-link:power:usb2";
gpio-export,output = <1>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
};
};
&pcie1 {
status = "okay";
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy1 {
status = "okay";
};
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
mtdparts: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
0x50 0xc737c737 /* LED_CTRL0 */
0x54 0x00000000 /* LED_CTRL1 */
0x58 0x00000000 /* LED_CTRL2 */
0x5c 0x0030c300 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
phy-handle = <&phy0>;
pll-data = <0x56000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
rgmii-enabled = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
pll-data = <0x03000101 0x00000101 0x00001616>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

235
target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts Normal file
View File

@ -0,0 +1,235 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
compatible = "tplink,tl-wdr4900-v2", "qca,qca9558";
model = "TP-Link TL-WDR4900 v2";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
gpio_leds: leds {
compatible = "gpio-leds";
led_system: system {
label = "tp-link:blue:system";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
usb1 {
label = "tp-link:green:usb1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port1>;
linux,default-trigger = "usbport";
};
usb2 {
label = "tp-link:green:usb2";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wlan2g {
label = "tp-link:blue:wlan2g";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
qss {
label = "tp-link:blue:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan5g {
label = "tp-link:blue:wlan5g";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb1_power {
gpio-export,name = "tp-link:power:usb1";
gpio-export,output = <1>;
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
gpio_usb2_power {
gpio-export,name = "tp-link:power:usb2";
gpio-export,output = <1>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
};
};
};
&pcie1 {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-2)>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};
&uart {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy1 {
status = "okay";
};
&usb1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x7d0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
0x50 0xc737c737 /* LED_CTRL0 */
0x54 0x00000000 /* LED_CTRL1 */
0x58 0x00000000 /* LED_CTRL2 */
0x5c 0x0030c300 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
phy-handle = <&phy0>;
pll-data = <0x56000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
rgmii-enabled = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
pll-data = <0x03000101 0x00000101 0x00001616>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};

12
target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd-v2.dts Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9558_tplink_tl-wr1043nd.dtsi"
/ {
compatible = "tplink,tl-wr1043nd-v2", "qca,qca9557";
model = "TP-Link TL-WR1043ND Version 2";
};

12
target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd-v3.dts Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9558_tplink_tl-wr1043nd.dtsi"
/ {
compatible = "tplink,tl-wr1043nd-v3", "qca,qca9557";
model = "TP-Link TL-WR1043ND Version 3";
};

185
target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi Normal file
View File

@ -0,0 +1,185 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
leds {
compatible = "gpio-leds";
system: system {
label = "tp-link:green:system";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
usb {
label = "tp-link:green:usb";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wifi_green {
label = "tp-link:green:wlan";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wifi_wps {
label = "tp-link:green:wps";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wifi {
label = "RFKILL button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_usb_power {
gpio-export,name = "tp-link:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x7d0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
0x10 0x81000080 /* POWER_ON_STRIP */
0x50 0xcc35cc35 /* LED_CTRL0 */
0x54 0xca35ca35 /* LED_CTRL1 */
0x58 0xc935c935 /* LED_CTRL2 */
0x5c 0x03ffff00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x56000000 0x00000101 0x00001616>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
phy-handle = <&phy0>;
};
&eth1 {
status = "okay";
pll-data = <0x03000101 0x00000101 0x00001616>;
mtd-mac-address = <&uboot 0x1fc00>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

180
target/linux/ath79/dts/qca9561_avm_fritz4020.dts Normal file
View File

@ -0,0 +1,180 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
compatible = "avm,fritz4020", "qca,qca9560";
model = "AVM FRITZ!Box 4020";
aliases {
led-boot = &power;
led-failsafe = &info_red;
led-running = &power;
led-upgrade = &info_red;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpio-sck = <&gpio 20 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio 19 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
led_gpio: led_gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
lines-initial-states = /bits/ 8 <0xff>;
spi-max-frequency = <10000000>;
gpio_latch_bit {
gpio-hog;
gpios = <7 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "gpio-latch-bit";
};
};
};
leds {
compatible = "gpio-leds";
power: power {
label = "fritz4020:green:power";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "fritz4020:green:wlan";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
default-state = "off";
};
lan {
label = "fritz4020:green:lan";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan {
label = "fritz4020:green:wan";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
info {
label = "fritz4020:green:info";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
info_red: info_red {
label = "fritz4020:red:info";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps_button {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
};
wlan_button {
label = "WLAN button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "urlader";
reg = <0x000000 0x020000>;
read-only;
};
partition@1 {
label = "firmware";
reg = <0x020000 0xee0000>;
};
partition@2 {
label = "tffs (1)";
reg = <0xf00000 0x080000>;
read-only;
};
partition@3 {
label = "tffs (2)";
reg = <0xf80000 0x080000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-mode = "mii";
phy-handle = <&swphy0>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
};
&wmac {
status = "okay";
qca,no-eeprom;
};

150
target/linux/ath79/dts/qca9563_phicomm_k2t.dts Normal file
View File

@ -0,0 +1,150 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
model = "Phicomm K2T";
compatible = "phicomm,k2t";
aliases {
led-boot = &status_red;
led-failsafe = &status_red;
led-running = &status_red;
led-upgrade = &status_red;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
leds {
compatible = "gpio-leds";
status_blue {
label = "phicomm:blue:status";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
status_red: status_red {
label = "phicomm:red:status";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
status_yellow {
label = "phicomm:yellow:status";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&pcie {
status = "okay";
};
&spi {
num-cs = <1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x030000 0x10000>;
read-only;
};
partition@40000 {
label = "permanent";
reg = <0x040000 0x50000>;
read-only;
};
partition@90000 {
label = "firmware";
reg = <0x090000 0xf60000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x10 0x81000080 /* POWER_ON_STRIP */
0x50 0xcc35cc35 /* LED_CTRL0 */
0x54 0xcb37cb37 /* LED_CTRL1 */
0x58 0x00000000 /* LED_CTRL2 */
0x5c 0x00f3cf00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x03000101 0x00000101 0x00001919>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};

194
target/linux/ath79/dts/qca9563_tplink_re450-v2.dts Normal file
View File

@ -0,0 +1,194 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
compatible = "tplink,re450-v2", "qca,qca9563";
model = "TP-Link RE450 v2";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
mdio-gpio0 = &mdio2;
};
leds {
compatible = "gpio-leds";
system: power {
label = "tp-link:blue:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "tp-link:blue:wlan2g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "tp-link:blue:wlan5g";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
lan_link {
label = "tp-link:green:lan_link";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan_data {
label = "tp-link:green:lan_data";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wps_blue {
label = "tp-link:blue:wps";
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
wps_red {
label = "tp-link:red:wps";
gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
leds {
label = "LED control button";
linux,code = <BTN_0>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
mdio2: mdio {
compatible = "virtual,mdio-gpio";
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@4 {
reg = <4>;
device_type = "ethernet-phy";
reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
};
&pcie {
status = "okay";
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0x5e0000>;
};
partition@600000 {
label = "partition-table";
reg = <0x600000 0x010000>;
read-only;
};
info: partition@610000 {
label = "product-info";
reg = <0x610000 0x020000>;
read-only;
};
partition@630000 {
label = "config";
reg = <0x630000 0x020000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&info 0x8>;
phy-handle = <&phy0>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&info 0x8>;
};

Some files were not shown because too many files have changed in this diff Show More