diff --git a/package/boot/uboot-envtools/files/ipq806x b/package/boot/uboot-envtools/files/ipq806x index 7e1d71a7e..fea4a63e2 100644 --- a/package/boot/uboot-envtools/files/ipq806x +++ b/package/boot/uboot-envtools/files/ipq806x @@ -30,7 +30,8 @@ ubootenv_mtdinfo () { } case "$board" in -askey,rt4230w-rev6) +askey,rt4230w-rev6|\ +askey,rt4230w-rev9.3) ubootenv_add_uci_config "/dev/mtd9" "0x0" "0x40000" "0x20000" ;; edgecore,ecw5410) diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index a303ce265..72aac2ab9 100644 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -12,6 +12,7 @@ board=$(board_name) case "$board" in askey,rt4230w-rev6 |\ +askey,rt4230w-rev9.3 |\ asrock,g10 |\ nec,wg2600hp) ucidef_add_switch "switch0" \ diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 998372fdf..3340dcef7 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -25,7 +25,8 @@ case "$FIRMWARE" in ;; "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in - askey,rt4230w-rev6) + askey,rt4230w-rev6 |\ + askey,rt4230w-rev9.3) caldata_extract "0:ART" 0x1000 0x2f20 ;; asrock,g10) @@ -88,7 +89,8 @@ case "$FIRMWARE" in ;; "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in - askey,rt4230w-rev6) + askey,rt4230w-rev6 |\ + askey,rt4230w-rev9.3) caldata_extract "0:ART" 0x5000 0x2f20 ;; asrock,g10) diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh index a5a081298..4bcd93dbb 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh @@ -11,6 +11,7 @@ platform_check_image() { platform_do_upgrade() { case "$(board_name)" in askey,rt4230w-rev6 |\ + askey,rt4230w-rev9.3 |\ compex,wpq864 |\ netgear,d7800 |\ netgear,r7500 |\ diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts index 84947166c..c30e3c2c7 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts @@ -1,339 +1,13 @@ // SPDX-License-Identifier: GPL-2.0-or-later -#include "qcom-ipq8065.dtsi" +#include "qcom-ipq8065-rt4230w.dtsi" #include / { model = "Askey RT4230W REV6"; compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x3e000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &ledctrl3; - led-failsafe = &ledctrl1; - led-running = &ledctrl2; - led-upgrade = &ledctrl3; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - ledctrl1: ledctrl1 { - label = "ledctrl1"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - ledctrl2: ledctrl2 { - label = "ledctrl2"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - ledctrl3: ledctrl3 { - label = "ledctrl3"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - }; }; -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio54", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio22", "gpio23", "gpio24"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - rgmii2_pins: rgmii2_pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62"; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - - tx { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32"; - input-disable; - }; - }; -}; - -&nand_controller { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot_pages_size = <0x1180000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - partition@180000 { - label = "0:SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - partition@2c0000 { - label = "0:SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - partition@540000 { - label = "0:DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - partition@660000 { - label = "0:SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - partition@780000 { - label = "0:TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - partition@a00000 { - label = "0:RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - partition@c80000 { - label = "0:APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - partition@1180000 { - label = "0:APPSBLENV"; - reg = <0x1180000 0x0080000>; - }; - ART: partition@1200000 { - label = "0:ART"; - reg = <0x1200000 0x0140000>; - read-only; - }; - partition@1340000 { - label = "0:BOOTCONFIG"; - reg = <0x1340000 0x0060000>; - read-only; - }; - partition@13a0000 { - label = "0:SBL2_1"; - reg = <0x13a0000 0x0140000>; - read-only; - }; - partition@14e0000 { - label = "0:SBL3_1"; - reg = <0x14e0000 0x0280000>; - read-only; - }; - partition@1760000 { - label = "0:DDRCONFIG_1"; - reg = <0x1760000 0x0120000>; - read-only; - }; - partition@1880000 { - label = "0:SSD_1"; - reg = <0x1880000 0x0120000>; - read-only; - }; - partition@19a0000 { - label = "0:TZ_1"; - reg = <0x19a0000 0x0280000>; - read-only; - }; - partition@1c20000 { - label = "0:RPM_1"; - reg = <0x1c20000 0x0280000>; - read-only; - }; - partition@1ea0000 { - label = "0:BOOTCONFIG1"; - reg = <0x1ea0000 0x0060000>; - read-only; - }; - partition@1f00000 { - label = "0:APPSBL_1"; - reg = <0x1f00000 0x0500000>; - read-only; - }; - partition@2400000 { - label = "ubi"; - reg = <0x2400000 0x1a000000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0xaa545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - 0x00050 0xcf02cf02 /* LED_CTRL_0 */ - 0x00054 0xc832c832 /* LED_CTRL_1 */ - >; - }; - phy4: ethernet-phy@4 { - reg = <4>; - }; -}; - -&gmac0 { - status = "okay"; - compatible = "qcom,nss-gmac"; - reg = <0x37000000 0x200000>; - interrupts = ; - phy-mode = "rgmii"; - qcom,id = <0>; - qcom,pcs-chanid = <0>; - qcom,phy-mdio-addr = <0>; - qcom,poll-required = <0>; - qcom,rgmii-delay = <1>; - qcom,phy_mii_type = <0>; - qcom,emulation = <0>; - qcom,forced-speed = <1000>; - qcom,forced-duplex = <1>; - qcom,socver = <0>; - qcom,irq = <255>; - mdiobus = <&mdio0>; - - mtd-mac-address = <&ART 0x0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac1 { - status = "okay"; - compatible = "qcom,nss-gmac"; - reg = <0x37200000 0x200000>; - interrupts = ; - phy-mode = "sgmii"; - qcom,id = <1>; - qcom,pcs-chanid = <1>; - qcom,phy-mdio-addr = <4>; - qcom,poll-required = <0>; /* no polling */ - qcom,rgmii-delay = <0>; - qcom,phy_mii_type = <1>; - qcom,emulation = <0>; - qcom,forced-speed = <1000>; - qcom,forced-duplex = <1>; - qcom,socver = <0>; - qcom,irq = <258>; - mdiobus = <&mdio0>; - - mtd-mac-address = <&ART 0x6>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - clocks = <&gcc USB30_1_MASTER_CLK>; -}; - -&usb3_1 { - status = "okay"; - clocks = <&gcc USB30_0_MASTER_CLK>; -}; - -&pcie0 { - status = "okay"; - reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; -}; - -&pcie1 { - status = "okay"; - reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; +&ubi { + reg = <0x2400000 0x1a000000>; }; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev9.3.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev9.3.dts new file mode 100644 index 000000000..2dd8c2291 --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev9.3.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "qcom-ipq8065-rt4230w.dtsi" +#include + +/ { + model = "Askey RT4230W REV9.3"; + compatible = "askey,rt4230w-rev9.3", "qcom,ipq8065", "qcom,ipq8064"; +}; + +&ubi { + reg = <0x2400000 0xdc00000>; +}; diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w.dtsi new file mode 100644 index 000000000..85890dec5 --- /dev/null +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w.dtsi @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "qcom-ipq8065.dtsi" +#include + +/ { + memory@0 { + reg = <0x42000000 0x3e000000>; + device_type = "memory"; + }; + + aliases { + led-boot = &ledctrl3; + led-failsafe = &ledctrl1; + led-running = &ledctrl2; + led-upgrade = &ledctrl3; + }; + + chosen { + bootargs = "rootfstype=squashfs noinitrd"; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + ledctrl1: ledctrl1 { + label = "ledctrl1"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + ledctrl2: ledctrl2 { + label = "ledctrl2"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + ledctrl3: ledctrl3 { + label = "ledctrl3"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&qcom_pinmux { + button_pins: button_pins { + mux { + pins = "gpio54", "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio22", "gpio23", "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + + tx { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32"; + input-disable; + }; + }; + + spi_pins: spi_pins { + cs { + pins = "gpio20"; + drive-strength = <12>; + }; + }; +}; + +&gsbi5 { + qcom,mode = ; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + m25p80@0 { + compatible = "everspin,mr25h256"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; +}; + +&nand_controller { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + nand-is-boot-medium; + qcom,boot_pages_size = <0x1180000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x0000000 0x0040000>; + read-only; + }; + partition@40000 { + label = "0:MIBIB"; + reg = <0x0040000 0x0140000>; + read-only; + }; + partition@180000 { + label = "0:SBL2"; + reg = <0x0180000 0x0140000>; + read-only; + }; + partition@2c0000 { + label = "0:SBL3"; + reg = <0x02c0000 0x0280000>; + read-only; + }; + partition@540000 { + label = "0:DDRCONFIG"; + reg = <0x0540000 0x0120000>; + read-only; + }; + partition@660000 { + label = "0:SSD"; + reg = <0x0660000 0x0120000>; + read-only; + }; + partition@780000 { + label = "0:TZ"; + reg = <0x0780000 0x0280000>; + read-only; + }; + partition@a00000 { + label = "0:RPM"; + reg = <0x0a00000 0x0280000>; + read-only; + }; + partition@c80000 { + label = "0:APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + partition@1180000 { + label = "0:APPSBLENV"; + reg = <0x1180000 0x0080000>; + }; + ART: partition@1200000 { + label = "0:ART"; + reg = <0x1200000 0x0140000>; + read-only; + }; + partition@1340000 { + label = "0:BOOTCONFIG"; + reg = <0x1340000 0x0060000>; + read-only; + }; + partition@13a0000 { + label = "0:SBL2_1"; + reg = <0x13a0000 0x0140000>; + read-only; + }; + partition@14e0000 { + label = "0:SBL3_1"; + reg = <0x14e0000 0x0280000>; + read-only; + }; + partition@1760000 { + label = "0:DDRCONFIG_1"; + reg = <0x1760000 0x0120000>; + read-only; + }; + partition@1880000 { + label = "0:SSD_1"; + reg = <0x1880000 0x0120000>; + read-only; + }; + partition@19a0000 { + label = "0:TZ_1"; + reg = <0x19a0000 0x0280000>; + read-only; + }; + partition@1c20000 { + label = "0:RPM_1"; + reg = <0x1c20000 0x0280000>; + read-only; + }; + partition@1ea0000 { + label = "0:BOOTCONFIG1"; + reg = <0x1ea0000 0x0060000>; + read-only; + }; + partition@1f00000 { + label = "0:APPSBL_1"; + reg = <0x1f00000 0x0500000>; + read-only; + }; + ubi: partition@2400000 { + label = "ubi"; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + 0x00050 0xcf02cf02 /* LED_CTRL_0 */ + 0x00054 0xc832c832 /* LED_CTRL_1 */ + >; + }; + phy4: ethernet-phy@4 { + reg = <4>; + }; +}; + +&gmac0 { + status = "okay"; + compatible = "qcom,nss-gmac"; + reg = <0x37000000 0x200000>; + interrupts = ; + phy-mode = "rgmii"; + qcom,id = <0>; + qcom,pcs-chanid = <0>; + qcom,phy-mdio-addr = <0>; + qcom,poll-required = <0>; + qcom,rgmii-delay = <1>; + qcom,phy_mii_type = <0>; + qcom,emulation = <0>; + qcom,forced-speed = <1000>; + qcom,forced-duplex = <1>; + qcom,socver = <0>; + qcom,irq = <255>; + mdiobus = <&mdio0>; + + mtd-mac-address = <&ART 0x0>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac1 { + status = "okay"; + compatible = "qcom,nss-gmac"; + reg = <0x37200000 0x200000>; + interrupts = ; + phy-mode = "sgmii"; + qcom,id = <1>; + qcom,pcs-chanid = <1>; + qcom,phy-mdio-addr = <4>; + qcom,poll-required = <0>; /* no polling */ + qcom,rgmii-delay = <0>; + qcom,phy_mii_type = <1>; + qcom,emulation = <0>; + qcom,forced-speed = <1000>; + qcom,forced-duplex = <1>; + qcom,socver = <0>; + qcom,irq = <258>; + mdiobus = <&mdio0>; + + mtd-mac-address = <&ART 0x6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; + clocks = <&gcc USB30_1_MASTER_CLK>; +}; + +&usb3_1 { + status = "okay"; + clocks = <&gcc USB30_0_MASTER_CLK>; +}; + +&pcie0 { + status = "okay"; + reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; +}; + +&pcie1 { + status = "okay"; + reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + max-link-speed = <1>; +}; diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index a20e1b2f3..963b62366 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -101,19 +101,29 @@ define Device/ZyXELImage IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata endef -define Device/askey_rt4230w-rev6 +define Device/askey_rt4230w $(call Device/LegacyImage) DEVICE_VENDOR := Askey DEVICE_MODEL := RT4230W - DEVICE_VARIANT := REV6 SOC := qcom-ipq8065 BLOCKSIZE := 128k PAGESIZE := 2048 - DEVICE_PACKAGES := ath10k-firmware-qca9984-ct KERNEL_IN_UBI := 1 + DEVICE_PACKAGES := ath10k-firmware-qca9984-ct +endef + +define Device/askey_rt4230w-rev6 + $(call Device/askey_rt4230w) + DEVICE_VARIANT := REV6 endef TARGET_DEVICES += askey_rt4230w-rev6 +define Device/askey_rt4230w-rev9.3 + $(call Device/askey_rt4230w) + DEVICE_VARIANT := REV9.3 +endef +TARGET_DEVICES += askey_rt4230w-rev9.3 + define Device/asrock_g10 $(call Device/FitImage) $(call Device/UbiFit) diff --git a/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch index c4de4a57f..9959b17b6 100644 --- a/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq806x/patches-5.10/0069-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -907,8 +907,29 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -907,8 +907,30 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk04.1-c3.dtb \ qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq4019-ap.dk07.1-c2.dtb \ @@ -36,6 +36,7 @@ Signed-off-by: John Crispin + qcom-ipq8065-r7800.dtb \ + qcom-ipq8065-xr500.dtb \ + qcom-ipq8065-rt4230w-rev6.dtb \ ++ qcom-ipq8065-rt4230w-rev9.3.dtb \ + qcom-ipq8068-ecw5410.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ diff --git a/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch index 25464ecde..3ff73db40 100644 --- a/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq806x/patches-5.4/0069-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -842,7 +842,28 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -842,7 +842,29 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk04.1-c3.dtb \ qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq4019-ap.dk07.1-c2.dtb \ @@ -35,6 +35,7 @@ Signed-off-by: John Crispin + qcom-ipq8065-r7800.dtb \ + qcom-ipq8065-xr500.dtb \ + qcom-ipq8065-rt4230w-rev6.dtb \ ++ qcom-ipq8065-rt4230w-rev9.3.dtb \ + qcom-ipq8068-ecw5410.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \