mediatek: filogic: add support for HUASIFEI WH3000 PRO (aka Fudy Pro)

target/linux/mediatek/dts/mt7981b-huasifei-wh3000-pro.dts

@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "mt7981.dtsi"
+
+/ {
+	model = "Huasifei WH3000 Pro";
+	compatible = "huasifei,wh3000-pro", "mediatek,mt7981";
+
+	aliases {
+		serial0 = &uart0;
+		led-boot = &led_sys_red;
+		led-failsafe = &led_sys_red;
+		led-running = &led_sys_green;
+		led-upgrade = &led_sys_green;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " root=PARTLABEL=rootfs rootwait";
+	};
+	
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 63 127 191 223 255>;
+		interrupt-parent = <&pio>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		pwms = <&pwm 1 40000 0>;
+		status = "okay";
+	};
+	
+	gpio-export {
+		compatible = "gpio-export";
+
+		gpio_modem_power {
+			gpio-export,name = "modem_power";
+			gpio-export,output = <0>;
+			gpios = <&pio 4 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		mode {
+			label = "mode";
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_sys_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led_sys_green: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		cpu-active-low {
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_low>;
+		};
+
+		cpu-active-med {
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		cpu-active-high {
+			cooling-device = <&fan 3 3>;
+			trip = <&cpu_trip_active_high>;
+		};
+	};
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy1>;
+
+		nvmem-cells = <&macaddr_factory_4 2>;
+		nvmem-cell-names = "mac-address";
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&int_gbe_phy>;
+
+		nvmem-cells = <&macaddr_factory_4 3>;
+		nvmem-cell-names = "mac-address";
+	};
+};
+
+&mdio_bus {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <1>;
+		reset-assert-us = <100000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
+		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&pio>;
+		realtek,aldps-enable;
+	};
+};
+
+&mmc0 {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <52000000>;
+	non-removable;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+
+	card@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+
+		block {
+			compatible = "block-device";
+
+			partitions {
+				block-partition-factory {
+					partname = "factory";
+
+					nvmem-layout {
+						compatible = "fixed-layout";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						eeprom_factory_0: eeprom@0 {
+							reg = <0x0 0x1000>;
+						};
+
+						macaddr_factory_4: macaddr@4 {
+							compatible = "mac-base";
+							reg = <0x4 0x6>;
+							#nvmem-cell-cells = <1>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&pio {
+	mmc0_pins_default: mmc0-pins-default {
+		mux {
+			function = "flash";
+			groups = "emmc_45";
+		};
+	};
+	mmc0_pins_uhs: mmc0-pins-uhs {
+		mux {
+			function = "flash";
+			groups = "emmc_45";
+		};
+	};
+	
+	pwm1_pin: pwm1-pin-g0 {
+		mux {
+			function = "pwm";
+			groups = "pwm1_0";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_pin>;
+	status = "okay";
+};
+
+&fan {
+	pwms = <&pwm 0 40000 0>;
+	interrupt-parent = <&pio>;
+	interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};

target/linux/mediatek/filogic/base-files/etc/board.d/02_network

@@ -35,7 +35,8 @@ mediatek_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
 		;;
 	bananapi,bpi-r3-mini|\
-	huasifei,wh3000-emmc)
+	huasifei,wh3000-emmc|\
+	huasifei,wh3000-pro)
 		ucidef_set_interfaces_lan_wan eth0 eth1
 		;;
 	bananapi,bpi-r4|\

target/linux/mediatek/filogic/base-files/etc/board.d/03_gpio_switches

@@ -0,0 +1,15 @@
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+huasifei,wh3000-pro)
+	ucidef_add_gpio_switch "modem_power" "Modem power" "modem_power" "0"
+	;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh

@@ -50,6 +50,7 @@ platform_do_upgrade() {
 	glinet,gl-xe3000|\
 	hf,m7986r1-emmc|\
 	huasifei,wh3000-emmc|\
+	huasifei,wh3000-pro|\
 	jdcloud,re-cs-05)
 		CI_KERNPART="kernel"
 		CI_ROOTPART="rootfs"
@@ -106,6 +107,7 @@ platform_copy_config() {
 	glinet,gl-xe3000|\
 	hf,m7986r1-emmc|\
 	huasifei,wh3000-emmc|\
+	huasifei,wh3000-pro|\
 	jdcloud,re-cs-05)
 		emmc_copy_config
 		;;

target/linux/mediatek/image/filogic.mk

@@ -518,6 +518,20 @@ define Device/huasifei_wh3000-emmc
 endef
 TARGET_DEVICES += huasifei_wh3000-emmc
 
+define Device/huasifei_wh3000-pro
+  DEVICE_VENDOR := Huasifei
+  DEVICE_MODEL := WH3000 PRO
+  DEVICE_DTS := mt7981b-huasifei-wh3000-pro
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 f2fsck mkf2fs kmod-hwmon-pwmfan
+  KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  SUPPORTED_DEVICES += huasifei,fudy-pro
+endef
+TARGET_DEVICES += huasifei_wh3000-pro
+
 define Device/huasifei_ws3006
   DEVICE_VENDOR := Huasifei
   DEVICE_MODEL := WS3006